techmannih/nema34-mounted-stepper-controller
A 48 V USB‑C PD 3.1 EPR NEMA‑34 stepper controller PCB combining STM32/TMC5160 control, external MOSFET motor bridges, protected power and regenerative braking, USB data, telemetry, diagnostics, status LEDs, and buzzer alarms.
- Version
- 0.3.92
- License
- unset
- Stars
- 1
imports/B4B_PH_K_S_LF__SN_.tsx
import type { ChipProps } from "@tscircuit/props"
const pinLabels = {
pin1: ["pin1"],
pin2: ["pin2"],
pin3: ["pin3"],
pin4: ["pin4"]
} as const
export const B4B_PH_K_S_LF__SN_ = (props: ChipProps<typeof pinLabels>) => {
return (
<connector
pinLabels={pinLabels}
supplierPartNumbers={{
"jlcpcb": [
"C131334"
]
}}
manufacturerPartNumber="B4B-PH-K-S(LF)(SN)"
footprint={<footprint insertionDirection="from_above">
<platedhole portHints={["pin2"]} pcbX="0.999998mm" pcbY="-0.550037mm" outerDiameter="1.5999968mm" holeDiameter="0.999998mm" shape="circle" />
<platedhole portHints={["pin1"]} pcbX="2.999994mm" pcbY="-0.550037mm" outerDiameter="1.5999968mm" holeDiameter="0.999998mm" shape="circle" />
<platedhole portHints={["pin3"]} pcbX="-0.999998mm" pcbY="-0.550037mm" outerDiameter="1.5999968mm" holeDiameter="0.999998mm" shape="circle" />
<platedhole portHints={["pin4"]} pcbX="-2.999994mm" pcbY="-0.550037mm" outerDiameter="1.5999968mm" holeDiameter="0.999998mm" shape="circle" />
<silkscreencircle pcbX="4.285996mm" pcbY="-1.566037mm" radius="0.359156mm" />
<silkscreenrect pcbX="0mm" pcbY="0mm" width="9.99998mm" height="4.500118mm" strokeWidth="0.254mm" />
<courtyardoutline outline={[{"x":-5.200002799999993,"y":2.6999569999999267},{"x":5.199977399999966,"y":2.6999569999999267},{"x":5.199977399999966,"y":-2.500033599999938},{"x":-5.200002799999993,"y":-2.500033599999938},{"x":-5.200002799999993,"y":2.6999569999999267}]} />
</footprint>}
cadModel={{
objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C131334.obj?uuid=3b95b8b4d5d24ff4a871a43c952e432a",
stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C131334.step?uuid=3b95b8b4d5d24ff4a871a43c952e432a",
pcbRotationOffset: 180,
modelOriginPosition: { x: 2.9999872999999297, y: -0.0, z: -0.000005999999999950489 },
}}
{...props}
/>
)
}