techmannih/museview
A 50×35 mm USB‑C 5 V camera board combining an ESP32‑S3 module, M0031 parallel camera connector, buck/LDO power rails, USB/ESD protection, controls, status LED, and passives.
- Version
- 0.1.18
- License
- unset
- Stars
- 1
release/placement-review.json
PCB
Schematic
{
"circuitSha256": "8cd59dbde512966d0c3e1e10f3b3d84e830e3c76d0c6bf7b1cdb099fdb0da876",
"cplSha256": "cfe2052b694abdf84171229b4aab8be2fd9b3af1adfe06a9c2f676d45324aa2d",
"view": "top; +X east/right, +Y north/up; millimetres; board-centre origin",
"status": "Board-side pin/polarity landmarks recorded. JLC rotation and centroid calibration are NOT approved.",
"parts": [
{
"ref": "U1",
"jlcPart": "C2913202",
"footprintRotationDeg": 0,
"cplCenterMm": {
"x": 4.5,
"y": 0.4999999999999991
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "GND1",
"positionMm": {
"x": -4.250045999999999,
"y": 9.5449527
},
"nets": [
"GND"
]
},
{
"pin": "pin2",
"sourceName": "3V3",
"positionMm": {
"x": -4.250045999999999,
"y": 8.2749527
},
"nets": [
"VDD_IO"
]
},
{
"pin": "pin40",
"sourceName": "GND2",
"positionMm": {
"x": 13.250046,
"y": 9.5449527
},
"nets": [
"GND"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "J1",
"jlcPart": "C165948",
"footprintRotationDeg": 270,
"cplCenterMm": {
"x": -21.27504355,
"y": 3
},
"landmarks": [
{
"pin": "CC1",
"sourceName": "CC1",
"positionMm": {
"x": -18.6759568,
"y": 4.2499340000000005
},
"nets": [
"CC1"
]
},
{
"pin": "CC2",
"sourceName": "CC2",
"positionMm": {
"x": -18.6759568,
"y": 1.2499400000000003
},
"nets": [
"CC2"
]
},
{
"pin": "GND1",
"sourceName": "GND1",
"positionMm": {
"x": -18.6759568,
"y": 6.1999555
},
"nets": [
"GND"
]
},
{
"pin": "GND2",
"sourceName": "GND2",
"positionMm": {
"x": -18.6758552,
"y": -0.20000630000000008
},
"nets": [
"GND"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "J2",
"jlcPart": "C262669",
"footprintRotationDeg": 90,
"cplCenterMm": {
"x": 22.6,
"y": -1.4999999999999996
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "STROBE_NC",
"positionMm": {
"x": 21.19988215,
"y": -7.249798
},
"nets": []
},
{
"pin": "pin2",
"sourceName": "AGND",
"positionMm": {
"x": 21.19988215,
"y": -6.749926
},
"nets": [
"GND"
]
},
{
"pin": "pin10",
"sourceName": "DVDD",
"positionMm": {
"x": 21.19988215,
"y": -2.749934
},
"nets": [
"CAM_1V3"
]
},
{
"pin": "pin11",
"sourceName": "DOVDD",
"positionMm": {
"x": 21.19988215,
"y": -2.249808
},
"nets": [
"VDD_IO"
]
},
{
"pin": "pin24",
"sourceName": "D0_NC",
"positionMm": {
"x": 21.19988215,
"y": 4.250052
},
"nets": []
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "D1",
"jlcPart": "C193402",
"footprintRotationDeg": 0,
"cplCenterMm": {
"x": -21,
"y": 9.7
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "cathode",
"positionMm": {
"x": -22.634998,
"y": 9.7
},
"nets": [
"VBUS_5V"
]
},
{
"pin": "cathode",
"sourceName": "cathode",
"positionMm": {
"x": -22.634998,
"y": 9.7
},
"nets": [
"VBUS_5V"
]
},
{
"pin": "pin2",
"sourceName": "anode",
"positionMm": {
"x": -19.365002,
"y": 9.7
},
"nets": [
"GND"
]
},
{
"pin": "anode",
"sourceName": "anode",
"positionMm": {
"x": -19.365002,
"y": 9.7
},
"nets": [
"GND"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "LED1",
"jlcPart": "C2286",
"footprintRotationDeg": 0,
"cplCenterMm": {
"x": -12.7,
"y": -13.8
},
"landmarks": [
{
"pin": "cathode",
"sourceName": "cathode",
"positionMm": {
"x": -13.450061999999999,
"y": -13.8
},
"nets": [
"GND"
]
},
{
"pin": "anode",
"sourceName": "anode",
"positionMm": {
"x": -11.949938,
"y": -13.8
},
"nets": [
"LED_A"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "U2",
"jlcPart": "C2687116",
"footprintRotationDeg": 270,
"cplCenterMm": {
"x": -15.699999999999942,
"y": 5.684341886080802e-14
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "I1",
"positionMm": {
"x": -16.84909599999987,
"y": 0.949959999999919
},
"nets": [
"USB_DM_PORT",
"USB_DM_ESD"
]
},
{
"pin": "GND",
"sourceName": "GND",
"positionMm": {
"x": -16.84909599999987,
"y": -7.036183691564352e-17
},
"nets": [
"GND"
]
},
{
"pin": "VBUS",
"sourceName": "VBUS",
"positionMm": {
"x": -14.550904000000013,
"y": 7.036183691565048e-17
},
"nets": [
"VBUS_5V"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "U3",
"jlcPart": "C141836",
"footprintRotationDeg": 90,
"cplCenterMm": {
"x": -11,
"y": -1.5
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "EN",
"positionMm": {
"x": -10.05004,
"y": -0.1999010000000001
},
"nets": [
"VBUS_5V"
]
},
{
"pin": "GND",
"sourceName": "GND",
"positionMm": {
"x": -11,
"y": -0.1999010000000001
},
"nets": [
"GND"
]
},
{
"pin": "VIN",
"sourceName": "VIN",
"positionMm": {
"x": -11.94996,
"y": -2.800099
},
"nets": [
"VBUS_5V"
]
},
{
"pin": "FB",
"sourceName": "FB",
"positionMm": {
"x": -10.05004,
"y": -2.800099
},
"nets": [
"BUCK_FB"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "U4",
"jlcPart": "C347374",
"footprintRotationDeg": 0,
"cplCenterMm": {
"x": -20,
"y": -6.5
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "VSS",
"positionMm": {
"x": -18.898656,
"y": -7.44996
},
"nets": [
"GND"
]
},
{
"pin": "VOUT",
"sourceName": "VOUT",
"positionMm": {
"x": -18.898656,
"y": -5.55004
},
"nets": [
"CAM_2V8"
]
},
{
"pin": "VIN",
"sourceName": "VIN",
"positionMm": {
"x": -21.101344,
"y": -6.5
},
"nets": [
"VBUS_5V"
]
}
],
"jlcPreviewStatus": "pending"
},
{
"ref": "U5",
"jlcPart": "C5152783",
"footprintRotationDeg": 0,
"cplCenterMm": {
"x": -18,
"y": -10.7
},
"landmarks": [
{
"pin": "pin1",
"sourceName": "IN",
"positionMm": {
"x": -16.899926,
"y": -11.649833
},
"nets": [
"VDD_IO"
]
},
{
"pin": "GND",
"sourceName": "GND",
"positionMm": {
"x": -16.899926,
"y": -10.700127
},
"nets": [
"GND"
]
},
{
"pin": "OUT",
"sourceName": "OUT",
"positionMm": {
"x": -19.100074,
"y": -11.650087
},
"nets": [
"CAM_1V3"
]
},
{
"pin": "FB",
"sourceName": "FB",
"positionMm": {
"x": -19.100074,
"y": -9.749913
},
"nets": [
"CAM_FB"
]
}
],
"jlcPreviewStatus": "pending"
}
]
}
Related Packages
More from this authortechmannih/duplicate-NPTHA 50mm x 50mm PCB layout featuring two mounting holes, a 10kΩ resistor, and a 100nF capacitor positioned at specific coordinates.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something new0hmX/dual-usb-peltier-assembly