seveibar/spi-display-webcam-interceptor

imports/SKRPACE010.tsx

import type { PushButtonProps } from "@tscircuit/props";

const pinLabels = {
	// The vendor numbers 1-2 are one contact bank and 3-4 are the other.
	// Map logical pins 1-2 across the switch so the built-in schematic symbol
	// and PCB footprint describe the same normally-open electrical function.
	// The other two pads remain as soldered mechanical/contact duplicates.
	pin1: ["pin1", "terminal_a", "vendor_pad_1"],
	pin2: ["pin2", "terminal_b", "vendor_pad_3"],
} as const;

export const SKRPACE010 = (props: PushButtonProps<typeof pinLabels>) => {
	const { name = "SW1", ...restProps } = props;

	return (
		<pushbutton
			name={name}
			pinLabels={pinLabels}
			supplierPartNumbers={{
				jlcpcb: ["C139797"],
			}}
			manufacturerPartNumber="SKRPACE010"
			footprint={
				<footprint>
					<smtpad
						portHints={["pin2", "vendor_pad_3"]}
						pcbX="-2.100072mm"
						pcbY="1.074928mm"
						width="1.0500106mm"
						height="0.6999986mm"
						shape="rect"
					/>
					<smtpad
						pcbX="2.100072mm"
						pcbY="1.074928mm"
						width="1.0500106mm"
						height="0.6999986mm"
						shape="rect"
					/>
					<smtpad
						portHints={["pin1", "vendor_pad_1"]}
						pcbX="-2.100072mm"
						pcbY="-1.074928mm"
						width="1.0500106mm"
						height="0.6999986mm"
						shape="rect"
					/>
					<smtpad
						pcbX="2.100072mm"
						pcbY="-1.074928mm"
						width="1.0500106mm"
						height="0.6999986mm"
						shape="rect"
					/>
					<silkscreenpath
						route={[
							{ x: -0.5080000000000382, y: 1.0160000000000764 },
							{ x: 0.5079999999999245, y: 1.0160000000000764 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: -0.5080000000000382, y: -1.0159999999999627 },
							{ x: 0.5079999999999245, y: -1.0159999999999627 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: 2.199893999999972, y: 0.5438140000001113 },
							{ x: 2.199893999999972, y: -0.5438139999999976 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: 1.3664184000000432, y: 1.5238729999999805 },
							{ x: -1.366418400000157, y: 1.5238729999999805 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: -2.1998940000000857, y: 0.5438140000001113 },
							{ x: -2.1998940000000857, y: -0.5438139999999976 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: -1.3810995999999705, y: -1.5499079999999594 },
							{ x: 1.3810995999998568, y: -1.5499079999999594 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: 0.5079999999999245, y: 1.0160000000000764 },
							{ x: 0.26485528508385414, y: 0.9864768865048745 },
							{ x: 0.035841257203401256, y: 0.8996233220636896 },
							{ x: -0.16573262077258732, y: 0.7604869201419433 },
							{ x: -0.32815160774794094, y: 0.5771537826788062 },
							{ x: -0.4419765025684228, y: 0.36027856523526225 },
							{ x: -0.5005922160837599, y: 0.1224652671394324 },
							{ x: -0.5005922160837599, y: -0.1224652671394324 },
							{ x: -0.4419765025684228, y: -0.36027856523514856 },
							{ x: -0.32815160774794094, y: -0.5771537826788062 },
							{ x: -0.16573262077258732, y: -0.7604869201418296 },
							{ x: 0.035841257203401256, y: -0.8996233220635759 },
							{ x: 0.26485528508385414, y: -0.9864768865047608 },
							{ x: 0.5079999999999245, y: -1.0159999999999627 },
						]}
					/>
					<silkscreenpath
						route={[
							{ x: -0.5080000000000382, y: -1.0159999999999627 },
							{ x: -0.26485528508374045, y: -0.9864768865047608 },
							{ x: -0.03584125720362863, y: -0.8996233220635759 },
							{ x: 0.165732620772701, y: -0.7604869201418296 },
							{ x: 0.32815160774794094, y: -0.5771537826788062 },
							{ x: 0.4419765025683091, y: -0.36027856523514856 },
							{ x: 0.5005922160835325, y: -0.1224652671394324 },
							{ x: 0.5005922160835325, y: 0.1224652671394324 },
							{ x: 0.4419765025683091, y: 0.36027856523526225 },
							{ x: 0.32815160774794094, y: 0.5771537826788062 },
							{ x: 0.165732620772701, y: 0.7604869201419433 },
							{ x: -0.03584125720362863, y: 0.8996233220636896 },
							{ x: -0.26485528508374045, y: 0.9864768865048745 },
							{ x: -0.5080000000000382, y: 1.0160000000000764 },
						]}
					/>
					<courtyardoutline
						outline={[
							{ x: -2.8662000000001626, y: 1.8756000000000768 },
							{ x: 2.891599999999812, y: 1.8756000000000768 },
							{ x: 2.891599999999812, y: -1.8501999999998588 },
							{ x: -2.8662000000001626, y: -1.8501999999998588 },
							{ x: -2.8662000000001626, y: 1.8756000000000768 },
						]}
					/>
				</footprint>
			}
			cadModel={{
				objUrl:
					"https://modelcdn.tscircuit.com/easyeda_models/assets/C139797.obj?uuid=00d848a7e8384bbd9286566957e8bb9c",
				stepUrl:
					"https://modelcdn.tscircuit.com/easyeda_models/assets/C139797.step?uuid=00d848a7e8384bbd9286566957e8bb9c",
				pcbRotationOffset: 0,
				modelOriginPosition: {
					x: 0.000012700000070253736,
					y: 0.00012700000002041634,
					z: -0.01,
				},
			}}
			{...restProps}
		/>
	);
};