seveibar/schematic-example01
This circuit diagram depicts a Raspberry Pi Pico (RP2040) microcontroller with multiple GPIO, power regulation, crystal oscillator, external flash memory, USB interface, and peripheral connections including LEDs, push buttons, connectors, and optional NeoPixel, integrated on a custom PCB.
- Version
- 1.0.0
- License
- unset
- Stars
- 0
dist/index.cjs
'use strict';
var jsxRuntime = require('react/jsx-runtime');
const rp2040PinLabels = {
pin1: "IOVDD",
pin2: "GPIO0",
pin3: "GPIO1",
pin4: "GPIO2",
pin5: "GPIO3",
pin6: "GPIO4",
pin7: "GPIO5",
pin8: "GPIO6",
pin9: "GPIO7",
pin10: "IOVDD",
pin11: "GPIO8",
pin12: "GPIO9",
pin13: "GPIO10",
pin14: "GPIO11",
pin15: "GPIO12",
pin16: "GPIO13",
pin17: "GPIO14",
pin18: "GPIO15",
pin19: "TESTEN",
pin20: "XIN",
pin21: "XOUT",
pin22: "IOVDD",
pin23: "DVDD",
pin24: "SWCLK",
pin25: "SWDIO",
pin26: "RUN",
pin27: "GPIO16",
pin28: "GPIO17",
pin29: "GPIO18",
pin30: "GPIO19",
pin31: "GPIO20",
pin32: "GPIO21",
pin33: "GPIO22",
pin34: "GPIO23",
pin35: "GPIO24",
pin36: "GPIO25",
pin37: "GPIO26_ADC0",
pin38: "GPIO27_ADC1",
pin39: "GPIO28_ADC2",
pin40: "GPIO29_ADC3",
pin41: "ADC_AVDD",
pin42: "VREG_VIN",
pin43: "VREG_VOUT",
pin44: "USB_VDD",
pin45: "GND",
pin46: "USB_DM",
pin47: "USB_DP",
pin48: "QSPI_SD3",
pin49: "QSPI_SCLK",
pin50: "QSPI_SD0",
pin51: "QSPI_SD2",
pin52: "QSPI_SD1",
pin53: "QSPI_SS",
pin54: "GND",
pin55: "DVDD",
pin56: "IOVDD",
};
const decouplingCaps = [
["C8", "3V3", -13.2, -8.7],
["C9", "1V2", -11.9, -8.7],
["C10", "1V2", -10.6, -8.7],
["C11", "1V2", -9.3, -8.7],
["C12", "3V3", -8, -8.7],
["C13", "3V3", -6.7, -8.7],
["C14", "3V3", -5.4, -8.7],
["C15", "3V3", -4.1, -8.7],
["C16", "3V3", -2.8, -8.7],
["C17", "3V3", -1.5, -8.7],
];
const leftHeaderPins = [
"D_PLUS",
"D_MINUS",
"D0",
"GND",
"D1",
"D2",
"D3",
"D4",
"D5",
"D6",
"D7",
"D8",
"D9",
];
const rightHeaderPins = [
"D_MINUS",
"RAW",
"GND",
"RESET",
"V3V3",
"A3",
"A2",
"A1",
"A0",
"SCLK",
"MISO",
"MOSI",
"D10",
];
var index_circuit = () => (jsxRuntime.jsxs("board", { width: "90mm", height: "60mm", routingDisabled: true, children: [jsxRuntime.jsx("schematicrect", { schX: -9, schY: -0.7, width: 22, height: 18, color: "#e63946", strokeWidth: 0.03, isDashed: true }), jsxRuntime.jsx("schematictext", { schX: -9, schY: 8.1, text: "RP2040 CORE", color: "#e63946", fontSize: 0.55 }), jsxRuntime.jsx("chip", { name: "IC2", manufacturerPartNumber: "RP2040", footprint: "pinrow56", schX: -8.8, schY: -0.8, schWidth: 8.8, schHeight: 14, schPinSpacing: 0.38, pinLabels: rp2040PinLabels, schPinArrangement: {
leftSide: {
pins: [
"pin26",
"pin1",
"pin22",
"pin41",
"pin23",
"pin43",
"pin19",
"pin20",
"pin21",
"pin36",
"pin37",
"pin38",
"pin39",
"pin40",
"pin49",
"pin53",
"pin50",
"pin52",
"pin51",
"pin48",
"pin45",
],
direction: "top-to-bottom",
},
rightSide: {
pins: [
"pin2",
"pin3",
"pin4",
"pin5",
"pin6",
"pin7",
"pin8",
"pin9",
"pin11",
"pin12",
"pin13",
"pin14",
"pin15",
"pin16",
"pin17",
"pin18",
"pin27",
"pin28",
"pin29",
"pin30",
"pin31",
"pin32",
"pin33",
"pin34",
"pin35",
"pin46",
"pin47",
"pin24",
"pin25",
],
direction: "top-to-bottom",
},
}, connections: {
IOVDD: "net.V3V3",
GPIO0: "net.D0",
GPIO1: "net.D1",
GPIO2: "net.D2",
GPIO3: "net.D3",
GPIO4: "net.D4",
GPIO5: "net.D5",
GPIO6: "net.D6",
GPIO7: "net.D7",
GPIO8: "net.D8",
GPIO9: "net.D9",
GPIO10: "net.D10",
GPIO11: "net.USBOOT",
GPIO12: "net.SDA",
GPIO13: "net.SCL",
GPIO16: "net.NEOPIX",
GPIO18: "net.SCLK",
GPIO20: "net.MOSI",
GPIO19: "net.MISO",
GPIO26_ADC0: "net.A0",
GPIO27_ADC1: "net.A1",
GPIO28_ADC2: "net.A2",
GPIO29_ADC3: "net.A3",
RUN: "net.RESET",
USB_DM: "net.D_MINUS",
USB_DP: "net.D_PLUS",
QSPI_SCLK: "net.QSPI_SCK",
QSPI_SS: "net.QSPI_CS",
QSPI_SD0: "net.QSPI_DATA0",
QSPI_SD1: "net.QSPI_DATA1",
QSPI_SD2: "net.QSPI_DATA2",
QSPI_SD3: "net.QSPI_DATA3",
VREG_VIN: "net.V3V3",
USB_VDD: "net.V3V3",
DVDD: "net.V1V2",
ADC_AVDD: "net.V3V3",
GND: "net.GND",
TESTEN: "net.GND",
XIN: "net.XIN",
XOUT: "net.XOUT",
SWCLK: "net.SWCLK",
SWDIO: "net.SWDIO",
} }), jsxRuntime.jsx("crystal", { name: "Y1", frequency: "12MHz", loadCapacitance: "10pF", footprint: "pinrow2", schX: -14.2, schY: -1.2, schOrientation: "vertical", connections: { left: "net.XIN", right: "net.XOUT" } }), jsxRuntime.jsx("capacitor", { name: "C19", capacitance: "22pF", footprint: "0402", schX: -15.3, schY: -2.5, schOrientation: "vertical", connections: { pin1: "net.XIN", pin2: "net.GND" } }), jsxRuntime.jsx("capacitor", { name: "C20", capacitance: "22pF", footprint: "0402", schX: -14, schY: -2.5, schOrientation: "vertical", connections: { pin1: "net.XOUT", pin2: "net.GND" } }), jsxRuntime.jsx("resistor", { name: "R3", resistance: "10k", footprint: "0402", schX: -15.4, schY: 2.2, schRotation: 90, connections: { pin1: "net.V3V3", pin2: "net.RESET" } }), jsxRuntime.jsx("netlabel", { net: "RESET", connectsTo: ".IC2 > .RUN", schX: -14, schY: 1.5 }), jsxRuntime.jsx("netlabel", { net: "A0", connectsTo: ".IC2 > .GPIO26_ADC0", schX: -15.9, schY: -5.1 }), jsxRuntime.jsx("netlabel", { net: "A1", connectsTo: ".IC2 > .GPIO27_ADC1", schX: -15.9, schY: -5.7 }), jsxRuntime.jsx("netlabel", { net: "A2", connectsTo: ".IC2 > .GPIO28_ADC2", schX: -15.9, schY: -6.3 }), jsxRuntime.jsx("netlabel", { net: "A3", connectsTo: ".IC2 > .GPIO29_ADC3", schX: -15.9, schY: -6.9 }), jsxRuntime.jsx("schematicrect", { schX: -4.8, schY: 7.9, width: 15.8, height: 5.2, color: "#e63946", strokeWidth: 0.03, isDashed: true }), jsxRuntime.jsx("schematictext", { schX: -4.8, schY: 10.3, text: "POWER AND FILTERING", color: "#e63946", fontSize: 0.5 }), jsxRuntime.jsx("diode", { name: "DPROT", displayName: "D1", variant: "schottky", footprint: "0603", schX: -12.4, schY: 8.5, connections: { anode: "net.VBUS", cathode: "net.RAW" } }), jsxRuntime.jsx("fuse", { name: "F1", currentRating: "500mA", footprint: "0603", schX: -13.5, schY: 9.8, connections: { pin1: "net.VBUS", pin2: ".DPROT > .anode" } }), jsxRuntime.jsx("chip", { name: "U2", manufacturerPartNumber: "AP2112K-3.3", footprint: "soic5", schX: -8.5, schY: 8.3, schWidth: 4, schHeight: 2.4, pinLabels: {
pin1: "IN",
pin2: "GND",
pin3: "EN",
pin4: "NC",
pin5: "OUT",
}, schPinArrangement: { leftSide: ["pin1", "pin2", "pin3"], rightSide: ["pin5", "pin4"] }, connections: { IN: "net.RAW", EN: "net.RAW", OUT: "net.V3V3", GND: "net.GND" }, noConnect: ["NC"] }), jsxRuntime.jsx("capacitor", { name: "C1", capacitance: "10uF", footprint: "0603", schX: -14, schY: 6.5, schOrientation: "vertical", connections: { pin1: "net.RAW", pin2: "net.GND" } }), jsxRuntime.jsx("capacitor", { name: "C4", capacitance: "10uF", footprint: "0603", schX: -5.8, schY: 7.0, schOrientation: "vertical", connections: { pin1: "net.V3V3", pin2: "net.GND" } }), jsxRuntime.jsx("led", { name: "DPWR", displayName: "D2", color: "green", footprint: "0603", schX: -2.4, schY: 8.5, connections: { anode: "net.V3V3", cathode: "net.PWR_LED_K" } }), jsxRuntime.jsx("resistor", { name: "R1", resistance: "10k", footprint: "0402", schX: -2.4, schY: 7.0, connections: { pin1: "net.PWR_LED_K", pin2: "net.GND" } }), decouplingCaps.map(([name, rail, schX, schY]) => (jsxRuntime.jsx("capacitor", { name: name, capacitance: "0.1uF", footprint: "0402", schX: schX, schY: schY, schOrientation: "vertical", connections: { pin1: rail === "3V3" ? "net.V3V3" : "net.V1V2", pin2: "net.GND" } }, name))), jsxRuntime.jsx("capacitor", { name: "C18", capacitance: "1uF", footprint: "0402", schX: 0, schY: -8.7, schOrientation: "vertical", connections: { pin1: "net.V3V3", pin2: "net.GND" } }), jsxRuntime.jsx("schematicrect", { schX: 3.9, schY: 7.8, width: 9.8, height: 5.4, color: "#e63946", strokeWidth: 0.03, isDashed: true }), jsxRuntime.jsx("schematictext", { schX: 1.0, schY: 10.3, text: "RESET", color: "#e63946", fontSize: 0.5 }), jsxRuntime.jsx("schematictext", { schX: 4.3, schY: 10.3, text: "QSPI_CS", color: "#e63946", fontSize: 0.5 }), jsxRuntime.jsx("resistor", { name: "R2", resistance: "10k", footprint: "0402", schX: 1.0, schY: 8.6, connections: { pin1: "net.V3V3", pin2: "net.USBOOT" } }), jsxRuntime.jsx("pushbutton", { name: "SW3", footprint: "pinrow2", pinLabels: { pin1: "A", pin2: "B" }, schX: 1.0, schY: 7.0, schWidth: 2, schHeight: 1.2, connections: { A: "net.USBOOT", B: "net.GND" } }), jsxRuntime.jsx("pushbutton", { name: "SW2", footprint: "pinrow2", pinLabels: { pin1: "A", pin2: "B" }, schX: 5.1, schY: 7.0, schWidth: 2, schHeight: 1.2, connections: { A: "net.RESET", B: "net.GND" } }), jsxRuntime.jsx("resistor", { name: "R7", resistance: "1k", footprint: "0402", schX: 4.3, schY: 8.6, connections: { pin1: "net.V3V3", pin2: "net.QSPI_CS" } }), jsxRuntime.jsx("schematicrect", { schX: 10.9, schY: 6.1, width: 14.6, height: 8.8, color: "#e63946", strokeWidth: 0.03, isDashed: true }), jsxRuntime.jsx("connector", { name: "U3", standard: "usb_c", footprint: "pinrow8", schX: 8.1, schY: 8.4, schWidth: 4.4, schHeight: 4.8, pinLabels: {
pin1: "VBUS",
pin2: "D_PLUS",
pin3: "D_MINUS",
pin4: "CC1",
pin5: "CC2",
pin6: "SBU1",
pin7: "SBU2",
pin8: "GND",
}, schPinArrangement: {
rightSide: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6", "pin7", "pin8"],
}, connections: {
VBUS: "net.VBUS",
D_PLUS: "net.D_PLUS",
D_MINUS: "net.D_MINUS",
CC1: "net.CC1",
CC2: "net.CC2",
GND: "net.GND",
}, noConnect: ["SBU1", "SBU2"] }), jsxRuntime.jsx("resistor", { name: "R8", resistance: "5.1k", footprint: "0402", schX: 11.0, schY: 6.4, connections: { pin1: "net.CC1", pin2: "net.GND" } }), jsxRuntime.jsx("resistor", { name: "R9", resistance: "5.1k", footprint: "0402", schX: 12.3, schY: 6.9, connections: { pin1: "net.CC2", pin2: "net.GND" } }), jsxRuntime.jsx("netlabel", { net: "VBUS", connectsTo: ".U3 > .VBUS", schX: 13.8, schY: 9.5 }), jsxRuntime.jsx("pinheader", { name: "CONN1", pinCount: 4, gender: "female", footprint: "pinrow4", pinLabels: ["GND", "V_PLUS", "SDA", "SCL"], schX: 7.4, schY: 3.4, schFacingDirection: "left", connections: { GND: "net.GND", V_PLUS: "net.V3V3", SDA: "net.SDA", SCL: "net.SCL" } }), jsxRuntime.jsx("schematictext", { schX: 8.2, schY: 2.0, text: "STEMMA_I2C_QTSKINNY", color: "#888888", fontSize: 0.35 }), jsxRuntime.jsx("resistor", { name: "R10", resistance: "10k", footprint: "0402", schX: 5.0, schY: 3.6, connections: { pin1: "net.V3V3", pin2: "net.SDA" } }), jsxRuntime.jsx("resistor", { name: "R11", resistance: "5.1k", footprint: "0402", schX: 5.0, schY: 2.8, connections: { pin1: "net.V3V3", pin2: "net.SCL" } }), jsxRuntime.jsx("chip", { name: "U5", manufacturerPartNumber: "8MB QSPI Flash", footprint: "soic8", schX: 19.0, schY: 8.0, schWidth: 4.2, schHeight: 3.6, pinLabels: {
pin1: "SCK",
pin2: "MOSI",
pin3: "MISO",
pin4: "SSEL",
pin5: "WP_IO2",
pin6: "HOLD_IO3",
pin7: "VSS",
pin8: "VCC",
}, schPinArrangement: {
leftSide: ["pin1", "pin2", "pin3", "pin4", "pin5", "pin6"],
rightSide: ["pin8", "pin7"],
}, connections: {
SCK: "net.QSPI_SCK",
MOSI: "net.QSPI_DATA0",
MISO: "net.QSPI_DATA1",
SSEL: "net.QSPI_CS",
WP_IO2: "net.QSPI_DATA2",
HOLD_IO3: "net.QSPI_DATA3",
VSS: "net.GND",
VCC: "net.V3V3",
} }), jsxRuntime.jsx("netlabel", { net: "QSPI_SCK", connectsTo: ".U5 > .SCK", schX: 14.8, schY: 9.4 }), jsxRuntime.jsx("netlabel", { net: "QSPI_DATA0", connectsTo: ".U5 > .MOSI", schX: 14.8, schY: 8.8 }), jsxRuntime.jsx("netlabel", { net: "QSPI_DATA1", connectsTo: ".U5 > .MISO", schX: 14.8, schY: 8.2 }), jsxRuntime.jsx("netlabel", { net: "QSPI_CS", connectsTo: ".U5 > .SSEL", schX: 14.8, schY: 7.6 }), jsxRuntime.jsx("netlabel", { net: "QSPI_DATA2", connectsTo: ".U5 > .WP_IO2", schX: 14.8, schY: 7.0 }), jsxRuntime.jsx("netlabel", { net: "QSPI_DATA3", connectsTo: ".U5 > .HOLD_IO3", schX: 14.8, schY: 6.4 }), jsxRuntime.jsx("chip", { name: "NEO1", displayName: "D3", manufacturerPartNumber: "WS2812B", footprint: "soic4", schX: 18.0, schY: 3.0, schWidth: 3, schHeight: 2.4, pinLabels: { pin1: "VDD", pin2: "DIN", pin3: "DOUT", pin4: "GND" }, schPinArrangement: { leftSide: ["pin2"], rightSide: ["pin3"], topSide: ["pin1"], bottomSide: ["pin4"] }, connections: { VDD: "net.V3V3", DIN: "net.NEOPIX", GND: "net.GND" }, noConnect: ["DOUT"] }), jsxRuntime.jsx("netlabel", { net: "NEOPIX", connectsTo: ".NEO1 > .DIN", schX: 15.0, schY: 3.0 }), jsxRuntime.jsx("schematicrect", { schX: 14.2, schY: -4.2, width: 16.6, height: 7.2, color: "#e63946", strokeWidth: 0.03, isDashed: true }), jsxRuntime.jsx("pinheader", { name: "JP2", pinCount: 13, gender: "female", footprint: "pinrow13", pinLabels: [...leftHeaderPins], schX: 10.0, schY: -4.2, schFacingDirection: "right", schPinSpacing: 0.45, connections: Object.fromEntries(leftHeaderPins.map((pin) => [pin, `net.${pin}`])) }), jsxRuntime.jsx("pinheader", { name: "JP1", pinCount: 13, gender: "female", footprint: "pinrow13", pinLabels: [...rightHeaderPins], schX: 18.6, schY: -4.2, schFacingDirection: "left", schPinSpacing: 0.45, connections: Object.fromEntries(rightHeaderPins.map((pin) => [
pin,
pin === "RAW" ? "net.RAW" : `net.${pin}`,
])) }), jsxRuntime.jsx("schematicrect", { schX: 13.2, schY: -10, width: 19.6, height: 4.9, color: "#e63946", strokeWidth: 0.04 }), jsxRuntime.jsx("schematictext", { schX: 9.3, schY: -8.8, text: "ADAFRUIT INDUSTRIES", color: "#e63946", fontSize: 0.7 }), jsxRuntime.jsx("schematictext", { schX: 9.3, schY: -10, text: "Keeb 2040 rev B - tscircuit recreation", color: "#e63946", fontSize: 0.46 }), jsxRuntime.jsx("schematictext", { schX: 16.8, schY: -11.3, text: "FILE: index.circuit.tsx PAGE: 1/1", color: "#e63946", fontSize: 0.4 })] }));
module.exports = index_circuit;
