seveibar/pd-dual-stepper-controller

reports/tsci-check.log

Errors: 0
Warnings: 99
- source_refdes_convention_warning: The "Y" prefix is being used with a <chip />, try using it with a <crystal />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_unnamed_trace_warning: <trace#3471(from:.R_M2_REQUEST_PD > .pin1 to:.Q_PD_ENABLE_M2 > .source) /> is missing a name. Add a name prop to make the trace easier to identify.
- pcb_trace_warning: Trace [.DRIVER > .VMB to .DRIVER > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.C_VMA > .pin1 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER > .GND2 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .J_MOTOR_USB > .B4A9] is routed thinner than requested (requested: 0.8mm, actual: 0.16mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.F_MOTOR_VBUS > .pin2 to .D_MOTOR_BLOCK > .anode] is routed thinner than requested (requested: 0.8mm, actual: 0.59mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .F_MOTOR_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.16mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_MOTOR_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .D_MOTOR_TVS > .cathode] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.U_PD > .VDD to .C_PD_VDD > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .VM to .C_VM_BULK > .pin1] is routed thinner than requested (requested: 0.4mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER > .VMB to .C_VM_HF > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER > .EP to .MCU > .layout_MCU__rp2040 > .U1 > .GND] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .GND1 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A1B12 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B1A12 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH1 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH2 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH3 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH4 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.U_PD > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT1 to .R_PHASE_A > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.44mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT2 to .J1 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.36mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT1 to .R_PHASE_B > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.4mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT2 to .J1 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.45mm).
- pcb_trace_warning: Trace [.U_TEMP > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.Q_BUZZER > .D to .BZ1 > ._NEG] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.BZ1 > ._POS to .MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_BUZZER > .anode to .Q_BUZZER > .D] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_BUZZER > .cathode to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.C_BUZZER > .pin1 to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin2 to .J1 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.C_CURRENT_A > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin2 to .J1 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.38mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.C_CURRENT_B > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__usb > .J_USB > .A4B9 to .D_STATUS > ._POS] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.TP_PD > .pin1 to .J_MOTOR_USB > .A4B9] is routed thinner than requested (requested: 0.2mm, actual: 0.16mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .VMB to .DRIVER_M2 > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.C_VMA_M2 > .pin1 to .DRIVER_M2 > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .GND2 to .DRIVER_M2 > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER_M2 > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .VM to .C_VM_BULK_M2 > .pin1] is routed thinner than requested (requested: 0.4mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .VMB to .C_VM_HF_M2 > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.31mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .EP to .MCU > .layout_MCU__rp2040 > .U1 > .GND] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .GND1 to .DRIVER_M2 > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .AOUT1 to .J2 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.4mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .AOUT2 to .J2 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.36mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .BOUT1 to .J2 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.4mm).
- pcb_trace_warning: Trace [.DRIVER_M2 > .BOUT2 to .J2 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.45mm).
- source_component_pins_underspecified_warning: All pins on Q_PD_ENABLE are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_PD_ENABLE_M2 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_BUZZER are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on D_STATUS are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_R are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_G are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_B are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Y1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: DRIVER has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_ENABLE has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_TEMP has no pin with requires_power=true
- source_no_power_pin_defined_warning: DRIVER_M2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_ENABLE_M2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: BZ1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_BUZZER has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_A has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: D_STATUS has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_R has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_G has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG3 has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_PD_ENABLE has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: U_TEMP has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_PD_ENABLE_M2 has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: BZ1 has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_BUZZER has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: D_STATUS has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_R has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_G has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_B has no pin with requires_ground=true
- schematic_component_styling_warning: Q_STATUS_R is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_G is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_B is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.