seveibar/pd-dual-stepper-controller

Bottom-side PCB silkscreen artwork consisting of embedded mirrored TS Circuit SVG logos, with via-clearance-aware lower-board placement.

Version
0.1.0
License
unset
Stars
0

dist/dual/design-checks.json

PCBPCB preview for dist/dual/design-checks.json
SchematicSchematic preview for dist/dual/design-checks.json
{
  "netlist": [],
  "componentsOutsideBoard": [],
  "componentOverlap": [],
  "padClearance": [],
  "copperMountingKeepouts": [],
  "courtyardMountingKeepouts": [],
  "schematicStyle": [
    {
      "lineItemType": "TwoPinComponentCouldBeFlipped",
      "schematicTraceId": "schematic_trace_3466",
      "traceName": "DRIVER_M2.CP2 to C_CP_M2.pin2",
      "targetComponent": {
        "lineItemType": "SchematicBoxPlacement",
        "positionAnchor": "center",
        "schX": 4.742500000000003,
        "schY": -9.649999999999999,
        "width": 0.65,
        "height": 0.6,
        "sourceComponentId": "source_component_78",
        "sourceComponentName": "C_CP_M2",
        "schematicComponentId": "schematic_component_78",
        "schematicSheetId": "schematic_sheet_5",
        "schematicSheetName": "motor_2"
      },
      "connectedComponent": {
        "lineItemType": "SchematicBoxPlacement",
        "positionAnchor": "center",
        "schX": 8.26,
        "schY": -7.68,
        "width": 2.2,
        "height": 3.8,
        "sourceComponentId": "source_component_77",
        "sourceComponentName": "DRIVER_M2",
        "schematicComponentId": "schematic_component_77",
        "schematicSheetId": "schematic_sheet_5",
        "schematicSheetName": "motor_2"
      },
      "targetPin": "pin2",
      "currentFacingDirection": "down",
      "suggestedFacingDirection": "up",
      "deltaSchRotation": 180,
      "currentTurnCount": 3,
      "suggestedTurnCount": 1,
      "message": "rotate C_CP_M2 by 180° so pin2 faces DRIVER_M2 and reduce this trace from 3 turns to 1"
    }
  ]
}