seveibar/nema17-rp2040-stepper-controller

reports/tsci-check.log

Errors: 0
Warnings: 168
- source_refdes_convention_warning: The "Y" prefix is being used with a <chip />, try using it with a <crystal />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_no_power_pin_defined_warning: Y1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_ENABLE has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_PD_ENABLE has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on Q_PD_ENABLE are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH1 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH2 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH3 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH4 are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: U_LAPTOP_ESD has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_PWR_ESD has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_HOST_DETECT has no pin with requires_power=true
- source_no_power_pin_defined_warning: BZ1 has no pin with requires_power=true
- source_no_ground_pin_defined_warning: BZ1 has no pin with requires_ground=true
- source_no_power_pin_defined_warning: Q_BUZZER has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_BUZZER has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on Q_BUZZER are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: D_STATUS has no pin with requires_power=true
- source_no_ground_pin_defined_warning: D_STATUS has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on D_STATUS are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Q_STATUS_R has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_STATUS_R has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on Q_STATUS_R are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Q_STATUS_G has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_STATUS_G has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on Q_STATUS_G are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Q_STATUS_B has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_STATUS_B has no pin with requires_ground=true
- source_component_pins_underspecified_warning: All pins on Q_STATUS_B are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Q_PD_CFG1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG3 has no pin with requires_power=true
- pcb_trace_warning: Trace [.J_LAPTOP > .A6 to .U_USB_MUX > .S0A] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_LAPTOP > .A7 to .U_USB_MUX > .S0B] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_LAPTOP > .B7 to .U_USB_MUX > .S0B] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_LAPTOP_CC1 > .pin1 to .J_LAPTOP > .A5] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_LAPTOP_CC2 > .pin1 to .J_LAPTOP > .B5] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_LAPTOP_ESD > .pin1 to .U_USB_MUX > .S0A] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_LAPTOP_ESD > .pin6 to .U_USB_MUX > .S0A] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_LAPTOP_ESD > .pin3 to .U_USB_MUX > .S0B] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_LAPTOP_ESD > .pin4 to .U_USB_MUX > .S0B] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_PE > .pin1 to .U_PWR_ESD > .pin5] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_USB_MUX > .XA to .MCU > .layout_MCU__usb > .R_USB2 > .pin1] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_USB_MUX > .XB to .MCU > .layout_MCU__usb > .R_USB1 > .pin1] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_PWR_OR > .anode to .D_MOTOR_BLOCK > .cathode] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_BUCK_EN > .pin2 to .U_LOGIC_BUCK > .SHDN] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_BST > .pin1 to .U_LOGIC_BUCK > .CB] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_BST > .pin2 to .U_LOGIC_BUCK > .SW] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_BUCK_FREEWHEEL > .cathode to .U_LOGIC_BUCK > .SW] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.L_LOGIC_BUCK > .pin1 to .U_LOGIC_BUCK > .SW] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_BUCK_FB_TOP > .pin2 to .U_LOGIC_BUCK > .FB] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .CP1 to .C_CP > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .CP2 to .C_CP > .pin2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .VCP to .C_VCP > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_VCP > .pin2 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .VMB to .DRIVER > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.C_VMA > .pin1 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .GND2 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .V3P3OUT to .C_DRV_3V3 > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin1 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin2 to .R_DRV_REF_BOTTOM > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_DRV_REF > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .MODE2 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .nENBL to .R_DRV_ENABLE_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO22 to .Q_PD_ENABLE > .source] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .J_MOTOR_USB > .B4A9] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.F_MOTOR_VBUS > .pin2 to .D_MOTOR_BLOCK > .anode] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .F_MOTOR_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_MOTOR_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .D_MOTOR_TVS > .cathode] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.U_PD > .DP to .U_PD > .DM] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .R_PD_VDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .R_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PD_VDD > .pin2 to .U_PD > .VDD] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PD_VBUS > .pin2 to .U_PD > .VBUS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD > .VDD to .C_PD_VDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A5 to .U_PD > .CC1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B5 to .U_PD > .CC2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B6 to .J_MOTOR_USB > .A6] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B7 to .J_MOTOR_USB > .A7] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .VMB to .C_VM_HF > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .GND1 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT1 to .R_PHASE_A > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT2 to .J1 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT1 to .R_PHASE_B > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT2 to .J1 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .AISEN to .R_ISEN_A > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.DRIVER > .BISEN to .R_ISEN_B > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.Q_PD_ENABLE > .drain to .DRIVER > .nSleep] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_ENABLE > .gate to .U_PD > .PG] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PD_ENABLE_PU > .pin2 to .U_PD > .VDD] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_SLEEP_PD > .pin1 to .DRIVER > .nSleep] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_FAULT_PU > .pin2 to .MCU > .layout_MCU__analog_supply > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin1 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_MCU_ENABLE_PD > .pin1 to .Q_PD_ENABLE > .source] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO16 to .R_BUZZER_GATE > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_BUZZER_GATE > .pin2 to .Q_BUZZER > .G] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_BUZZER > .G to .R_BUZZER_PD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_BUZZER > .D to .BZ1 > ._NEG] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_BUZZER > .cathode to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_BUZZER > .pin1 to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin2 to .J1 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin1 to .U_CURRENT_A > .IN_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin2 to .U_CURRENT_A > .IN_NEG] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__analog_supply > .L_AVDD > .pin1 to .U_CURRENT_A > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_A > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_CURRENT_A > .OUT to .R_ADC_A > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ADC_A > .pin2 to .MCU > .layout_MCU__rp2040 > .U1 > .GPIO28_ADC2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ADC_A > .pin2 to .C_ADC_A > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin2 to .J1 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin1 to .U_CURRENT_B > .IN_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin2 to .U_CURRENT_B > .IN_NEG] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__analog_supply > .L_AVDD > .pin1 to .U_CURRENT_B > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_B > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_CURRENT_B > .OUT to .R_ADC_B > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ADC_B > .pin2 to .MCU > .layout_MCU__rp2040 > .U1 > .GPIO29_ADC3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ADC_B > .pin2 to .C_ADC_B > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__analog_supply > .L_AVDD > .pin1 to .D_STATUS > ._POS] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_STATUS > .R_NEG to .R_STATUS_R > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_STATUS_R > .pin2 to .Q_STATUS_R > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO25 to .Q_STATUS_R > .B] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_STATUS > .G_NEG to .R_STATUS_G > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_STATUS_G > .pin2 to .Q_STATUS_G > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO2 to .Q_STATUS_G > .B] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_STATUS > .B_NEG to .R_STATUS_B > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_STATUS_B > .pin2 to .Q_STATUS_B > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO3 to .Q_STATUS_B > .B] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO0 to .U_ENCODER > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO1 to .U_ENCODER > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER_BULK > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SDA > .pin1 to .U_ENCODER > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SDA > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SCL > .pin1 to .U_ENCODER > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SCL > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO4 to .Q_PD_CFG1 > .IN] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG1 > .OUT to .U_PD > .CFG1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PD_CFG1_PU > .pin2 to .U_PD > .VDD] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO5 to .Q_PD_CFG2 > .IN] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .U_PD > .CFG2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .R_PD_CFG2_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO6 to .Q_PD_CFG3 > .IN] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG3 > .OUT to .U_PD > .CFG3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PD_CFG3_PU > .pin2 to .U_PD > .VDD] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD_MON > .VS_POS to .C_PD_MON > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD_MON > .SDA to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD_MON > .SCL to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD_PG > .In1 to .R_PD_VDD_PD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD_PG > .VCC to .C_PD_PG > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_style_warning: .U1 > .QSPI_SD2 to .U2 > .pin3 has a 5.44 mm segment on inner1 at 121.28°, 13.72° from the nearest allowed direction (135°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°).
- pcb_trace_style_warning: .MCU > .layout_MCU__rp2040 > .U1 > .GPIO23 to .DRIVER > .nFault has a 8.23 mm segment on inner2 at 27.50°, 17.50° from the nearest allowed direction (45°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°).
- pcb_trace_style_warning: .R_STATUS_G > .pin2 to .Q_STATUS_G > .C has a 5.60 mm segment on inner2 at 50.62°, 5.62° from the nearest allowed direction (45°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°).