seveibar/f1c100s-linux-dev-board
A 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.
- Version
- 1.9.2
- License
- unset
- Stars
- 1
fabrication/drill_npth.drl
M48
; DRILL file {tscircuit} date 2026-09-30T03:36:07.906Z
; FORMAT={-:-/ absolute / metric / decimal}
; #@! TF.CreationDate,2026-09-30T03:36:07.906Z
; #@! TF.GenerationSoftware,tscircuit
; #@! TF.FileFunction,NonPlated,1,4,NPTH
FMAT,2
METRIC
; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
T10C0.599999
; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
T11C3.200000
%
G90
G05
T10
X6.8999Y17.5944
X1.1001Y17.5944
T11
X-25.0000Y-20.0000
X-25.0000Y20.0000
X25.0000Y-20.0000
X25.0000Y20.0000
M30Related Packages
More from this authorseveibar/nrf-smart-watchThis code defines a detailed 3D PCB layout with schematic components, connectors, passive components, and RF antenna elements for a compact nRF52810-based smartwatch, including precise placement, copper pours, keepouts, and annotations.
Similar packageShiboSoftwareDev/mspm0g3507-usb-c-dev-boardThe circuit assembles a USB-C port with integrated ESD protection, power regulation, UART interface, and microcontroller (MSPM0G3507) with supporting components for USB data lines, CC termination, I2C, SPI, reset circuitry, and indicator LEDs.
Discover something newolivergrabinski/tscircuit-weatherA 60×44 mm ESP32-S3 Wi‑Fi/BLE weather-station PCB with USB‑C power, 3.3 V regulation and ESD protection, temperature/humidity and UV/light sensors, status LEDs, buttons, Qwiic I²C expansion, debug GPIO header, and a printable enclosure.