seveibar/ch552t-photo-diode

dist/index.js

import { jsxs, jsx } from 'react/jsx-runtime';
import { cloneElement } from 'react';
import { SmdUsbC } from '@tsci/seveibar.smd-usb-c';

/*
 * The registry part's CAD offset is correct at 0 degrees, but the offset is
 * not rotated with pcbRotation.  This wrapper applies the equivalent rotated
 * offset for the left-edge, -90 degree placement used on this board.
 */
const LeftEdgeUsbC = (props) => cloneElement(SmdUsbC(props), {
    cadModel: {
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/download?uuid=2a4bc2358b36497d9ab2a66ab6419ba3&pn=C165948",
        rotationOffset: { x: 0, y: 0, z: 180 },
        positionOffset: { x: -2.5, y: 0, z: 0 },
    },
});
const ch552tPins = {
    pin1: "P3_2_AIN3",
    pin2: "P1_4_AIN1_CC1",
    pin3: "P1_5_AIN2_CC2",
    pin4: "P1_6",
    pin5: "P1_7_LED",
    pin6: "RST",
    pin7: "P1_0",
    pin8: "P1_1_AIN0",
    pin9: "P3_1_TXD",
    pin10: "P3_0_RXD",
    pin11: "P3_3",
    pin12: "P3_4",
    pin13: "P3_5",
    pin14: "UDP",
    pin15: "UDM",
    pin16: "P1_3_XO",
    pin17: "P1_2_XI",
    pin18: "GND",
    pin19: "VCC",
    pin20: "V33",
};
const opa320Pins = {
    pin1: "OUT",
    pin2: "VNEG",
    pin3: "NONINV",
    pin4: "INV",
    pin5: "VPOS",
};
const usblc6Pins = {
    pin1: "DP_PORT",
    pin2: "GND",
    pin3: "DM_PORT",
    pin4: "DM_MCU",
    pin5: "VBUS",
    pin6: "DP_MCU",
};
var index_circuit = () => (jsxs("board", { name: "CH552T_BPX65_SENSOR", width: "36mm", height: "18mm", children: [jsx(LeftEdgeUsbC, { name: "J1", pcbX: -12.88, pcbY: 0, pcbRotation: -90, schX: -12, schY: 4 }), jsx("chip", { name: "U3", manufacturerPartNumber: "USBLC6-2SC6", supplierPartNumbers: { jlcpcb: ["C7519"] }, footprint: "kicad:Package_TO_SOT_SMD/SOT-23-6", pinLabels: usblc6Pins, schPortArrangement: {
                leftSide: { pins: ["DP_PORT", "DM_PORT"], direction: "top-to-bottom" },
                rightSide: { pins: ["DP_MCU", "DM_MCU"], direction: "top-to-bottom" },
                topSide: { pins: ["VBUS"], direction: "left-to-right" },
                bottomSide: { pins: ["GND"], direction: "left-to-right" },
            }, pcbX: -8, pcbY: 0, pcbRotation: -90, schX: -7.5, schY: 1.5 }), jsx("chip", { name: "U1", manufacturerPartNumber: "CH552T", supplierPartNumbers: { jlcpcb: ["C111367"] }, footprint: "kicad:Package_SO/TSSOP-20_4.4x6.5mm_P0.65mm", pinLabels: ch552tPins, schPortArrangement: {
                leftSide: {
                    pins: [
                        "P3_2_AIN3",
                        "P1_4_AIN1_CC1",
                        "P1_5_AIN2_CC2",
                        "P1_6",
                        "P1_7_LED",
                        "RST",
                        "P1_0",
                        "P1_1_AIN0",
                        "P3_1_TXD",
                        "P3_0_RXD",
                    ],
                    direction: "top-to-bottom",
                },
                rightSide: {
                    pins: ["P3_3", "P3_4", "P3_5", "UDP", "UDM", "P1_3_XO", "P1_2_XI"],
                    direction: "top-to-bottom",
                },
                topSide: { pins: ["VCC", "V33"], direction: "left-to-right" },
                bottomSide: { pins: ["GND"], direction: "left-to-right" },
            }, pcbX: -1.7, pcbY: 1.4, pcbRotation: 180, schX: 0, schY: 0 }), jsx("chip", { name: "U2", manufacturerPartNumber: "OPA320AIDBVR", supplierPartNumbers: { jlcpcb: ["C92494"] }, footprint: "kicad:Package_TO_SOT_SMD/SOT-23-5", pinLabels: opa320Pins, schPortArrangement: {
                leftSide: { pins: ["NONINV", "INV"], direction: "top-to-bottom" },
                rightSide: { pins: ["OUT"], direction: "top-to-bottom" },
                topSide: { pins: ["VPOS"], direction: "left-to-right" },
                bottomSide: { pins: ["VNEG"], direction: "left-to-right" },
            }, pcbX: 8.2, pcbY: 2.0, pcbRotation: 90, schX: 8, schY: 0 }), jsx("diode", { name: "D1", photo: true, manufacturerPartNumber: "BPX 65", footprint: "kicad:Package_TO_SOT_THT/TO-18-2_Lens", pinLabels: { pin1: "anode", pin2: "cathode" }, doNotPlace: true, pcbX: 14.2, pcbY: 1.2, pcbRotation: 90, schX: 11.5, schY: 0 }), jsx("resistor", { name: "R1", resistance: "5.1k", footprint: "0402", pcbX: -8, pcbY: 4.8, schX: -8.5, schY: 5, schRotation: 90 }), jsx("resistor", { name: "R2", resistance: "5.1k", footprint: "0402", pcbX: -8, pcbY: -4.8, schX: -6.5, schY: 5, schRotation: 90 }), jsx("capacitor", { name: "C1", capacitance: "4.7uF", footprint: "0603", pcbX: -6.2, pcbY: -3.5, schX: -3.5, schY: 6, schRotation: 90 }), jsx("capacitor", { name: "C2", capacitance: "100nF", footprint: "0402", pcbX: -5.5, pcbY: 5.8, schX: -1.5, schY: 6, schRotation: 90 }), jsx("capacitor", { name: "C3", capacitance: "100nF", footprint: "0402", pcbX: -6.7, pcbY: 3.3, schX: 0.3, schY: 6, schRotation: 90 }), jsx("capacitor", { name: "C4", capacitance: "100nF", footprint: "0402", pcbX: 8.2, pcbY: 5.8, schX: 7, schY: 3.5, schRotation: 90 }), jsx("resistor", { name: "R3", resistance: "90.9k", footprint: "0402", pcbX: 8.0, pcbY: -3.6, schX: 5.2, schY: -4.5, schRotation: 90 }), jsx("resistor", { name: "R4", resistance: "10k", footprint: "0402", pcbX: 10.8, pcbY: -4.8, schX: 7, schY: -4.5, schRotation: 90 }), jsx("capacitor", { name: "C5", capacitance: "1uF", footprint: "0603", pcbX: 13.7, pcbY: -3.7, schX: 8.8, schY: -4.5, schRotation: 90 }), jsx("resistor", { name: "R5", resistance: "330k", footprint: "0402", pcbX: 10.8, pcbY: 6.2, schX: 9.8, schY: 1.5 }), jsx("capacitor", { name: "C6", capacitance: "10pF", footprint: "0402", pcbX: 10.0, pcbY: 4.7, schX: 9.8, schY: 2.4 }), jsx("resistor", { name: "R6", resistance: "100", footprint: "0402", pcbX: 5.2, pcbY: 2.2, schX: 4.7, schY: -0.2 }), jsx("capacitor", { name: "C7", capacitance: "1nF", footprint: "0402", pcbX: 5.0, pcbY: 0.4, schX: 4.7, schY: -1.5, schRotation: 90 }), jsx("resistor", { name: "R7", resistance: "100k", footprint: "0402", pcbX: -1.3, pcbY: -4.2, schX: -1.5, schY: -4.5, schRotation: 90 }), jsx("resistor", { name: "R8", resistance: "1k", footprint: "0402", pcbX: 2.1, pcbY: -4.2, schX: 1.8, schY: -4.5 }), jsx("led", { name: "D2", color: "green", footprint: "0603", pcbX: 4.6, pcbY: -4.2, schX: 3.3, schY: -4.5 }), jsx("pinheader", { name: "J2", pinCount: 6, pitch: "2.54mm", gender: "unpopulated", doNotPlace: true, pinLabels: ["GND", "VBUS5", "RST", "UART_TX", "UART_RX", "ADC_IN"], pcbPinLabels: { pin1: "G", pin2: "5V", pin3: "RST", pin4: "TX", pin5: "RX", pin6: "ADC" }, showSilkscreenPinLabels: true, pcbX: -1.5, pcbY: -7.2, pcbOrientation: "horizontal", schX: 0, schY: -8 }), jsx("testpoint", { name: "TP1", footprintVariant: "pad", padDiameter: "1.5mm", pcbX: 8.2, pcbY: -7, schX: 6, schY: -7 }), jsx("testpoint", { name: "TP2", footprintVariant: "pad", padDiameter: "1.5mm", pcbX: 10.7, pcbY: -7, schX: 8, schY: -7 }), jsx("hole", { name: "H1", diameter: "2.4mm", pcbX: -15.7, pcbY: 6.8 }), jsx("hole", { name: "H2", diameter: "2.4mm", pcbX: 15.7, pcbY: -6.8 }), jsx("trace", { from: ".J1 > .pin3", to: "net.VBUS5", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin4", to: "net.VBUS5", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin13", to: "net.VBUS5", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin14", to: "net.VBUS5", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin1", to: "net.GND", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin2", to: "net.GND", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin15", to: "net.GND", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin16", to: "net.GND", thickness: "0.5mm" }), jsx("trace", { from: ".J1 > .pin6", to: ".R1 > .pin1" }), jsx("trace", { from: ".R1 > .pin2", to: "net.GND" }), jsx("trace", { from: ".J1 > .pin12", to: ".R2 > .pin1" }), jsx("trace", { from: ".R2 > .pin2", to: "net.GND" }), jsx("trace", { from: ".J1 > .pin8", to: "net.USB_DP_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".J1 > .pin10", to: "net.USB_DP_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".U3 > .pin1", to: "net.USB_DP_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".J1 > .pin7", to: "net.USB_DM_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".J1 > .pin9", to: "net.USB_DM_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".U3 > .pin3", to: "net.USB_DM_PORT", thickness: "0.25mm" }), jsx("trace", { from: ".U3 > .pin6", to: "net.USB_DP_MCU", thickness: "0.25mm" }), jsx("trace", { from: ".U1 > .pin14", to: "net.USB_DP_MCU", thickness: "0.25mm", maxViaCount: 0 }), jsx("trace", { from: ".U3 > .pin4", to: "net.USB_DM_MCU", thickness: "0.25mm" }), jsx("trace", { from: ".U1 > .pin15", to: "net.USB_DM_MCU", thickness: "0.25mm", maxViaCount: 0 }), jsx("trace", { from: ".U3 > .pin5", to: "net.VBUS5" }), jsx("trace", { from: ".U3 > .pin2", to: "net.GND" }), jsx("trace", { from: ".U1 > .pin19", to: "net.VBUS5", thickness: "0.4mm" }), jsx("trace", { from: ".U1 > .pin18", to: "net.GND", thickness: "0.4mm" }), jsx("trace", { from: ".U1 > .pin20", to: "net.V33" }), jsx("trace", { from: ".C1 > .pin1", to: "net.VBUS5" }), jsx("trace", { from: ".C1 > .pin2", to: "net.GND" }), jsx("trace", { from: ".C2 > .pin1", to: "net.VBUS5" }), jsx("trace", { from: ".C2 > .pin2", to: "net.GND" }), jsx("trace", { from: ".C3 > .pin1", to: "net.V33" }), jsx("trace", { from: ".C3 > .pin2", to: "net.GND" }), jsx("trace", { from: ".U2 > .pin5", to: "net.VBUS5" }), jsx("trace", { from: ".U2 > .pin2", to: "net.GND" }), jsx("trace", { from: ".C4 > .pin1", to: "net.VBUS5" }), jsx("trace", { from: ".C4 > .pin2", to: "net.GND" }), jsx("trace", { from: ".R3 > .pin1", to: "net.VBUS5" }), jsx("trace", { from: ".R3 > .pin2", to: "net.VREF_0V5" }), jsx("trace", { from: ".R4 > .pin1", to: "net.VREF_0V5" }), jsx("trace", { from: ".R4 > .pin2", to: "net.GND" }), jsx("trace", { from: ".C5 > .pin1", to: "net.VREF_0V5" }), jsx("trace", { from: ".C5 > .pin2", to: "net.GND" }), jsx("trace", { from: ".U2 > .pin3", to: "net.VREF_0V5" }), jsx("trace", { from: ".D1 > .pin1", to: "net.GND" }), jsx("trace", { from: ".D1 > .pin2", to: "net.PD_SUM" }), jsx("trace", { from: ".U2 > .pin4", to: "net.PD_SUM" }), jsx("trace", { from: ".R5 > .pin1", to: "net.PD_SUM" }), jsx("trace", { from: ".R5 > .pin2", to: "net.TIA_OUT" }), jsx("trace", { from: ".C6 > .pin1", to: "net.PD_SUM" }), jsx("trace", { from: ".C6 > .pin2", to: "net.TIA_OUT" }), jsx("trace", { from: ".U2 > .pin1", to: "net.TIA_OUT" }), jsx("trace", { from: ".R6 > .pin1", to: "net.TIA_OUT" }), jsx("trace", { from: ".R6 > .pin2", to: "net.ADC_IN" }), jsx("trace", { from: ".C7 > .pin1", to: "net.ADC_IN" }), jsx("trace", { from: ".C7 > .pin2", to: "net.GND" }), jsx("trace", { from: ".U1 > .pin8", to: "net.ADC_IN" }), jsx("trace", { from: ".U1 > .pin6", to: "net.RESET" }), jsx("trace", { from: ".R7 > .pin1", to: "net.RESET" }), jsx("trace", { from: ".R7 > .pin2", to: "net.GND" }), jsx("trace", { from: ".R8 > .pin1", to: "net.VBUS5" }), jsx("trace", { from: ".R8 > .pin2", to: ".D2 > .anode" }), jsx("trace", { from: ".D2 > .cathode", to: ".U1 > .pin5" }), jsx("trace", { from: ".J2 > .pin1", to: "net.GND" }), jsx("trace", { from: ".J2 > .pin2", to: "net.VBUS5" }), jsx("trace", { from: ".J2 > .pin3", to: "net.RESET" }), jsx("trace", { from: ".J2 > .pin4", to: ".U1 > .pin9" }), jsx("trace", { from: ".J2 > .pin5", to: ".U1 > .pin10" }), jsx("trace", { from: ".J2 > .pin6", to: "net.ADC_IN" }), jsx("trace", { from: ".TP1 > .pin1", to: "net.VREF_0V5" }), jsx("trace", { from: ".TP2 > .pin1", to: "net.TIA_OUT" }), jsx("copperpour", { name: "BOTTOM_GND", layer: "bottom", connectsTo: "net.GND", padMargin: "0.25mm", traceMargin: "0.2mm", boardEdgeMargin: "0.3mm", useThermalReliefs: true }), jsx("silkscreentext", { text: "CH552T + BPX65", pcbX: 1.0, pcbY: 7.6, fontSize: "0.75mm" }), jsx("silkscreentext", { text: "VREF", pcbX: 8.2, pcbY: -5.8, fontSize: "0.55mm" }), jsx("silkscreentext", { text: "TIA", pcbX: 10.7, pcbY: -5.8, fontSize: "0.55mm" })] }));

export { index_circuit as default };