rushabhcodes/desk-fidget-counter

validation/logs/pcb-placement.txt

$ bun validation/check-placement.mjs
placement summary: no placement issues

board top-layer utilization:
- occupied: 13.335% (754.439mm^2 of 5657.6mm^2)
- empty spaces over 5% of board area:
  - 21.008% (1188.527mm^2); bounds=(minX=-11.3mm, maxX=18.57mm, minY=-23.52mm, maxY=16.27mm)
  - 9.282% (525.124mm^2); bounds=(minX=11.53mm, maxX=34mm, minY=17.73mm, maxY=41.1mm)
  - 7.623% (431.276mm^2); bounds=(minX=-34mm, maxX=-24.28mm, minY=-42.1mm, maxY=2.27mm)
  - 5.98% (338.342mm^2); bounds=(minX=22.48mm, maxX=34mm, minY=-42.1mm, maxY=-12.73mm)

board-edge status:
- U1: 3.9mm inside right edge
- J1: 0.426mm inside top edge
- R1: 4.125mm inside top edge
- R2: 4.625mm inside top edge
- U6: 6.05mm inside top edge
- C1: 6.475mm inside top edge
- U4: 12.275mm inside bottom edge
- C2: 12.625mm inside bottom edge
- C3: 9.625mm inside bottom edge
- R21: 15.875mm inside bottom edge
- U5: 13.35mm inside bottom edge
- C5: 13.625mm inside bottom edge
- C6: 9.975mm inside left edge
- C7: 9.5mm inside right edge
- C8: 6.76mm inside right edge
- C9: 2.425mm inside right edge
- C10: 10.52mm inside right edge
- C11: 14.225mm inside right edge
- C17: 6mm inside right edge
- C18: 10.277mm inside right edge
- C12: 8.375mm inside right edge
- C13: 5.275mm inside right edge
- R10: 11.775mm inside right edge
- J4: 19.725mm inside top edge
- U2: 8.01mm inside left edge
- U7: 11.2mm inside left edge
- R24: 4.775mm inside left edge
- R25: 7.275mm inside left edge
- R26: 7.275mm inside left edge
- C14: 12.775mm inside left edge
- R12: 12.775mm inside left edge
- R13: 9.775mm inside left edge
- U3: 10.895mm inside top edge
- C16: 9.625mm inside top edge
- SW1: 0.35mm inside bottom edge
- J6: 11.5mm inside left edge
- R27: 13.775mm inside right edge
- R28: 10.775mm inside right edge
- C15: 4.775mm inside left edge

placement drc:
Errors: 0
Warnings: 0
Placement passed: no orientation or courtyard issues. J6 is the labelled cable termination row; the optional header is DNP. Full copper, shorts and independent KiCad checks remain required.