rushabhcodes/ESP32-E-Reader

Battery-powered ESP32-C3 e-reader board with USB-C LiPo charging/protection, buck-boost 3.3 V supply, Wi‑Fi MCU, e-paper and microSD interfaces, display charge-pump rails, and tactile power/navigation controls.

Version
1.0.87
License
unset
Stars
3

assets/enclosure/stl/printability-check.json

{
  "status": "reference_slice_pass",
  "revision": "H",
  "slicer": "PrusaSlicer-2.9.6+arch5 based on Slic3r (with GUI support)",
  "nozzle_mm": 0.4,
  "layer_mm": 0.2,
  "bed_mm": [
    220,
    220
  ],
  "profile_sha256": "4b28c3b345126062f517a26f533ec249a01f34fe8320375afc49dc9e23e22451",
  "parts": [
    {
      "source": "assets/enclosure/print/front-chassis.stl",
      "source_sha256": "a6df9f2a20d8975c61b52775128d878b670230581622ada4cebe030d4fea2785",
      "layer_change_events": 59,
      "filament_g": 14.53,
      "support_filament_g": 0.11,
      "reference_time": "1h 33m 17s",
      "warnings": [],
      "exit_code": 0
    },
    {
      "source": "assets/enclosure/print/rear-cover.stl",
      "source_sha256": "5ce1390950764ed196ea7e290c9969629386cd92567918272c6d19f04ad15d29",
      "layer_change_events": 84,
      "filament_g": 19.75,
      "support_filament_g": 1.34,
      "reference_time": "2h 33m 14s",
      "warnings": [],
      "exit_code": 0
    }
  ],
  "plate": {
    "source": "assets/enclosure/reader-print-plate.3mf",
    "source_sha256": "0057c52b3a8535f1fedacb6b03511316d0cca1064106ee61066c8950c8750c09",
    "layer_change_events": 86,
    "filament_g": 34.28,
    "support_filament_g": 1.471,
    "reference_time": "4h 6m 59s",
    "warnings": [],
    "exit_code": 0
  },
  "scope": "Toolpath generation only; printer-specific calibration, fit and fatigue remain unverified."
}