pixalynx/pixal-nfc-card

This code defines React components representing specific electronic hardware components—namely, a 100-ohm SMD resistor, a surface-mount LED, and a chip with labeled pins—each modeled with detailed footprints, 3D CAD models, and manufacturer part information for PCB design.

Version
1.1.0
License
unset
Stars
0

fabrication/rev-b/schematic-placement.log

PCBPCB preview for fabrication/rev-b/schematic-placement.log
SchematicSchematic preview for fabrication/rev-b/schematic-placement.log
Detected entrypoint: 'index.circuit.tsx'
<SchematicBoxPositions>
<SchematicBoxPlacement componentName="U1" positionAnchor="center" schX="0" schY="0" width="1.2" height="0.6" />
<SchematicBoxPlacement componentName="L1" positionAnchor="center" schX="-2.084" schY="-0.428" width="0.46" height="1.056" />
</SchematicBoxPositions>
<SchematicPlacementIssues>
<TraceCanBeSimplifiedByMovingComponent schematicTraceId="schematic_trace_0" targetComponentName="U1" deltaSchX="0" deltaSchY="+0.2" newSchX="0" newSchY="0.2" currentTurnCount="3" suggestedTurnCount="1" message="move U1 up by 0.2 (to schX=0, schY=0.2) to reduce this trace from 3 turns to 1" />
<TraceCanBeSimplifiedByMovingComponent schematicTraceId="schematic_trace_1" targetComponentName="U1" deltaSchX="0" deltaSchY="-1.056" newSchX="0" newSchY="-1.056" currentTurnCount="3" suggestedTurnCount="1" message="move U1 down by 1.056 (to schX=0, schY=-1.056) to reduce this trace from 3 turns to 1" />
</SchematicPlacementIssues>