pixalynx/pixal-nfc-card

This code defines React components representing specific electronic hardware components—namely, a 100-ohm SMD resistor, a surface-mount LED, and a chip with labeled pins—each modeled with detailed footprints, 3D CAD models, and manufacturer part information for PCB design.

Version
1.1.0
License
unset
Stars
0

fabrication/rev-b/coil-audit.log

PCBPCB preview for fabrication/rev-b/coil-audit.log
SchematicSchematic preview for fabrication/rev-b/coil-audit.log
PASS  coil is entirely on the bottom layer (22 points)
PASS  coil width is 0.45 mm
PASS  outer coil end (6.7, -3) lands on an L1 terminal hole
PASS  inner coil end (2.2, 3) lands on an L1 terminal hole
PASS  min turn-to-turn gap 0.4500 mm (segments 1 and 4), target 0.45
PASS  min terminal-hole to other-turn gap 0.2750 mm
PASS  no other copper on the bottom layer or pours near the coil (0)
PASS  coil copper to board edge 3.275 mm (straight edges)
PASS  self-test: an injected turn-to-turn short is detected

Estimated L = 2.536 uH (Greenhouse, no parasitics)
  CTUN 47.5 pF -> f0 14.50 MHz
  CTUN 50 pF -> f0 14.13 MHz
  CTUN 52.5 pF -> f0 13.79 MHz

Coil audit passed