pixalynx/pixal-gps
These files define two separate printed circuit boards: a small, two-layer battery cartridge with protection circuitry and contact pads for a pouch cell, and a larger, two-layer wireless charging dock featuring USB-C input, a resonant coil, and wireless power transmission components.
- Version
- 0.1.2
- License
- unset
- Stars
- 0
review/evidence/all-assertions.txt
tracker: 318 assertions evaluated; pcb errors by type: []
battery-pack: 10 assertions evaluated; pcb errors by type: []
dock: 14 assertions evaluated; pcb errors by type: []
342 design assertions evaluated. This checks the generated netlist and placement; RF, power and Qi behaviour still need bench validation.
COLLECTED FAILURES: ["tracker lands without copper (6): U1.P0_31, U3.VBUS, U6.SCL, U6.INT1, C41.pin2, R13.pin1","NTC to GND","JP1 bridges the FET pair only when fitted"]
Related Packages
More from this authorpixalynx/esp32-gps-cellular-trackerThis code defines a hardware layout comprising a Wi-Fi-enabled ESP32 module, GPS module, cellular GSM module, battery management components (including charger, protection circuits, and voltage regulators), USB-C connector, SIM card holder, RF components, and supporting passive components for a comprehensive GPS+Cellular tracker device.
Similar packageShiboSoftwareDev/solar-battery-charger-moduleThis hardware setup integrates a solar panel, a lithium-ion battery, and a multi-rail buck converter with a battery charging IC, protection circuitry, and monitoring components, enabling solar power harvesting, battery charging, and power distribution in an embedded system.
Discover something newimrishabh18/fitness_watchThis circuit integrates an ESP-12E microcontroller with various sensors and peripherals, including a AO3400A MOSFET for switching loads, to enable wireless control and sensor data processing.