pixalynx/esp32-usb-ducky

imports/TLV75733PDRVR.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["OUT"],
  pin2: ["NC1"],
  pin3: ["GND"],
  pin4: ["EN"],
  pin5: ["NC2"],
  pin6: ["IN"],
  pin7: ["EP"]
} as const

const pinAttributes = {
  pin2: {doNotConnect: true},
  pin3: {requiresGround: true},
  pin5: {doNotConnect: true},
  pin6: {requiresPower: true}
} as const

/**
 * TI TLV75733PDRVR, 1A 3.3V LDO in the 2x2mm WSON-6 (DRV) package with an
 * exposed thermal pad (JEDEC RθJA 100.2 °C/W vs 231.1 °C/W for the SOT-23
 * DBV part it replaces). TI: the thermal pad is internally connected to GND
 * and should go to a large ground area. Like the ESP32 centre pad, the pad
 * (pin7) is declared bonded to GND (pin3) and is never routed: the GND pour
 * joins it to two tented GND vias placed just past the package ends
 * (board-level, in index.circuit.tsx).
 */
export const TLV75733PDRVR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      internallyConnectedPins={[["pin3", "pin7"]]}
      supplierPartNumbers={{
  "jlcpcb": [
    "C2868428"
  ]
}}
      manufacturerPartNumber="TLV75733PDRVR"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.999998mm" pcbY="0.649986mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-0.999998mm" pcbY="-0mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="-0.999998mm" pcbY="-0.649986mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.999998mm" pcbY="-0.649986mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0.999998mm" pcbY="-0mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="0.999998mm" pcbY="0.649986mm" width="0.499999mm" height="0.350012mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="-0mm" pcbY="-0mm" width="0.999998mm" height="1.5999968mm" shape="rect" />
<silkscreenpath route={[{"x":-1.0001250000000255,"y":1.0999723999998423},{"x":0.999998000000005,"y":1.0999723999998423}]} />
<silkscreenpath route={[{"x":-1.0001250000000255,"y":-1.0999978000002102},{"x":0.999998000000005,"y":-1.0999978000002102}]} />
<silkscreenpath route={[{"x":-1.0160762000000432,"y":-1.0561574000001883},{"x":-1.0160762000000432,"y":-1.0999978000002102}]} />
<silkscreenpath route={[{"x":0.999998000000005,"y":1.0999723999998423},{"x":0.999998000000005,"y":1.0561319999998204}]} />
<silkscreenpath route={[{"x":0.999998000000005,"y":-1.0561574000001883},{"x":0.999998000000005,"y":-1.0999978000002102}]} />
<silkscreencircle pcbX="-1.5240762mm" pcbY="1.0159746mm" radius="0.124968mm" />
<silkscreentext text="{NAME}" pcbX="-0.206756mm" pcbY="2.137666mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.9045560000001842,"y":1.3876659999999674},{"x":1.491043999999988,"y":1.3876659999999674},{"x":1.491043999999988,"y":-1.3475340000001097},{"x":-1.9045560000001842,"y":-1.3475340000001097},{"x":-1.9045560000001842,"y":1.3876659999999674}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2868428.obj?uuid=c6fbdaaba2704b53a2adebf311c69daf",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2868428.step?uuid=c6fbdaaba2704b53a2adebf311c69daf",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0.000063500000123895, y: 0.000025400000140507473, z: 0 },
      }}
      {...props}
    />
  )
}