olivergrabinski/tscircuit-weather

A 60×44 mm ESP32-S3 Wi‑Fi/BLE weather-station PCB with USB‑C power, 3.3 V regulation and ESD protection, temperature/humidity and UV/light sensors, status LEDs, buttons, Qwiic I²C expansion, debug GPIO header, and a printable enclosure.

Version
1.2.0
License
unset
Stars
0

imports/SHT40_AD1B_R3.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["SDA"],
  pin2: ["SCL"],
  pin3: ["VDD"],
  pin4: ["VSS"],
  pin5: ["EP"]
} as const

const pinAttributes = {
  pin3: {requiresPower: true},
  pin4: {requiresGround: true}
} as const

export const SHT40_AD1B_R3 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      schPinArrangement={{"leftSide":[1,2],"rightSide":[3,4]}}
      supplierPartNumbers={{
  "jlcpcb": [
    "C2848306"
  ]
}}
      manufacturerPartNumber="SHT40-AD1B-R3"
      footprint={<footprint cutoutApertureDirection="from_above">
        <smtpad portHints={["pin1"]} pcbX="-0.677418mm" pcbY="0.40005mm" width="0.5050028mm" height="0.419989mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-0.677418mm" pcbY="-0.40005mm" width="0.5050028mm" height="0.419989mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.677418mm" pcbY="-0.40005mm" width="0.5050028mm" height="0.419989mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.677418mm" pcbY="0.40005mm" width="0.5050028mm" height="0.419989mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0mm" pcbY="-0mm" width="0.3999992mm" height="1.0999978mm" shape="rect" />
<silkscreenpath route={[{"x":-0.8261857999999904,"y":0.8261857999999904},{"x":0.8262111999999888,"y":0.8261857999999904}]} />
<silkscreenpath route={[{"x":-0.8261857999999904,"y":-0.826211200000003},{"x":0.8262111999999888,"y":-0.826211200000003}]} />
<silkscreencircle pcbX="-1.01346mm" pcbY="0.76454mm" radius="0.037592mm" />
<silkscreentext text="{NAME}" pcbX="-0.0508mm" pcbY="1.8382mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.29140000000001,"y":1.0882000000000005},{"x":1.189799999999991,"y":1.0882000000000005},{"x":1.189799999999991,"y":-1.06280000000001},{"x":-1.29140000000001,"y":-1.06280000000001},{"x":-1.29140000000001,"y":1.0882000000000005}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2848306.obj?uuid=09d63d3bb21a495aa100cde68133c9fa",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C2848306.step?uuid=09d63d3bb21a495aa100cde68133c9fa",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0.000012700000013410317, y: -0.000012699999999199463, z: -0.01 },
      }}
      {...props}
    />
  )
}