mohan-bee/pcb

placement-check.log

Detected entrypoint: 'index.circuit.tsx'
Each child in a list should have a unique "key" prop.

Check the render method of `board`. It was passed a child from Drone. See https://react.dev/link/warning-keys for more information.
trace: `key` is not a prop. Trying to access it will result in `undefined` being returned. If you need to access the same value within the child component, you should pass it as a different prop. (https://react.dev/link/special-props)
placement summary: no placement issues

board top-layer utilization:
- occupied: 14.982% (692.749mm^2 of 4624mm^2)
- empty spaces over 5% of board area:
  - 15.361% (710.281mm^2); bounds=(minX=11.48mm, maxX=34mm, minY=-15.77mm, maxY=15.77mm)
  - 14.044% (649.373mm^2); bounds=(minX=-34mm, maxX=-24.45mm, minY=-34mm, maxY=34mm)
  - 8.655% (400.215mm^2); bounds=(minX=-19.52mm, maxX=19.52mm, minY=23.749mm, maxY=34mm)
  - 6.069% (280.619mm^2); bounds=(minX=-0.72mm, maxX=8.52mm, minY=-34mm, maxY=-3.63mm)

board-edge status:
- U1: 16.075mm inside bottom edge
- U2: 30.857mm inside top edge
- U3: 24.36mm inside top edge
- L1: 19.922mm inside left edge
- CIN: 21.3mm inside top edge
- COUT1: 18.575mm inside left edge
- COUT2: 22.575mm inside left edge
- CVINA: 25.525mm inside top edge
- CBULK: 18.675mm inside top edge
- CESP: 20.3mm inside bottom edge
- CESPHF: 21.275mm inside left edge
- CEN: 20.525mm inside bottom edge
- CIMU: 29.275mm inside right edge
- CIMUB: 29.275mm inside right edge
- CIO: 29.275mm inside right edge
- CREG: 29.275mm inside left edge
- CADC: 22.775mm inside right edge
- REN: 22.775mm inside right edge
- RBOOT: 22.775mm inside right edge
- RCS: 29.275mm inside left edge
- RADCH: 22.775mm inside right edge
- RADCL: 22.775mm inside right edge
- TP1: 17.8mm inside right edge
- TP2: 17.8mm inside right edge
- TP3: 17.8mm inside right edge
- TP4: 17.8mm inside right edge
- TP5: 17.8mm inside right edge
- TP6: 17.8mm inside right edge
- BAT1: 16.5mm inside top edge
- BAT2: 16.5mm inside top edge
- Q1: 11mm inside right edge
- D1: 9.8mm inside right edge
- RG1: 15.275mm inside right edge
- RPD1: 15.025mm inside bottom edge
- CM1: 8.025mm inside bottom edge
- M1_POS: 7mm inside right edge
- M1_NEG: 4.5mm inside right edge
- Q2: 11mm inside right edge
- D2: 9.8mm inside right edge
- RG2: 15.275mm inside right edge
- RPD2: 15.025mm inside top edge
- CM2: 8.025mm inside top edge
- M2_POS: 7mm inside right edge
- M2_NEG: 4.5mm inside right edge
- Q3: 11mm inside left edge
- D3: 9.8mm inside left edge
- RG3: 15.275mm inside left edge
- RPD3: 15.025mm inside top edge
- CM3: 8.025mm inside top edge
- M3_POS: 7mm inside left edge
- M3_NEG: 4.5mm inside left edge
- Q4: 11mm inside left edge
- D4: 9.8mm inside left edge
- RG4: 15.275mm inside left edge
- RPD4: 15.025mm inside bottom edge
- CM4: 8.025mm inside bottom edge
- M4_POS: 7mm inside left edge
- M4_NEG: 4.5mm inside left edge

placement drc:
Errors: 0
Warnings: 0