mohan-bee/pcb

This circuit integrates an ESP32 microcontroller with an IMU sensor and power management components, using multiple capacitors, resistors, and MOSFETs for motor control, while managing power supply and battery connections.

Version
1.0.0
License
unset
Stars
0

imports/TPS63031DSKR/TPS63031DSKR.tsx

import objPath from "./TPS63031DSKR.obj"
import stepPath from "./TPS63031DSKR.step"
import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["VOUT"],
  pin2: ["L2"],
  pin3: ["PGND"],
  pin4: ["L1"],
  pin5: ["VIN"],
  pin6: ["EN"],
  pin7: ["pin7"],
  pin8: ["VINA"],
  pin9: ["GND"],
  pin10: ["FB"],
  pin11: ["EP"]
} as const

const pinAttributes = {
  pin3: {requiresGround: true},
  pin5: {requiresPower: true},
  pin9: {requiresGround: true}
} as const

export const TPS63031DSKR = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C15516"
  ]
}}
      manufacturerPartNumber="TPS63031DSKR"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="-1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="-1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="-1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin10"]} pcbX="1.157478mm" pcbY="0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin9"]} pcbX="1.157478mm" pcbY="0.499872mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin8"]} pcbX="1.157478mm" pcbY="0mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="1.157478mm" pcbY="-0.500126mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="1.157478mm" pcbY="-0.999998mm" width="0.6649974mm" height="0.2800096mm" shape="rect" />
<smtpad portHints={["pin11"]} pcbX="0mm" pcbY="0mm" width="1.1999976mm" height="1.999996mm" shape="rect" />
<silkscreenpath route={[{"x":-1.326210200000105,"y":1.326210200000105},{"x":1.3262101999999913,"y":1.326210200000105}]} />
<silkscreenpath route={[{"x":1.3262101999999913,"y":-1.326210200000105},{"x":-1.326210200000105,"y":-1.326210200000105}]} />
<silkscreencircle pcbX="-1.789938mm" pcbY="0.999998mm" radius="0.100076mm" />
<silkscreentext text="{NAME}" pcbX="-0.1905mm" pcbY="2.3208mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.129600000000096,"y":1.570799999999963},{"x":1.7486000000000104,"y":1.570799999999963},{"x":1.7486000000000104,"y":-1.5708000000000766},{"x":-2.129600000000096,"y":-1.5708000000000766},{"x":-2.129600000000096,"y":1.570799999999963}]} />
      </footprint>}
      cadModel={{
        objUrl: objPath,
        stepUrl: stepPath,
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0.000012699999842880061, z: 0 },
      }}
      {...props}
    />
  )
}