mohan-bee/gimbal-one-budget-pcb

A 4-layer STM32-based gimbal controller PCB with an onboard LSM6DS3TR-C IMU, three DRV8313 3-phase motor drivers, protected 3S battery input, 3.3 V buck regulation, and SWD/UART control interfaces.

Version
0.1.0
License
unset
Stars
0

fabrication/gerbers/gimbal-one-budget-drill.rpt

Drill report for gimbal-one-budget.kicad_pcb
Created on 2026-10-22T12:53:39

Copper Layer Stackup:
    =============================================================
    L1 :  F.Cu                      front
    L2 :  In1.Cu                    in1
    L3 :  In2.Cu                    in2
    L4 :  B.Cu                      back


Drill file 'gimbal-one-budget-PTH.drl' contains
    plated through holes:
    =============================================================
    T1  0.200mm  0.0079"  (177 holes))
    T2  0.300mm  0.0118"  (8 holes))
    T3  0.300mm  0.0118"  (24 holes))
    T4  0.500mm  0.0197"  (4 holes))
    T5  0.750mm  0.0295"  (9 holes))
    T6  0.800mm  0.0315"  (2 holes))
    T7  1.000mm  0.0394"  (12 holes))

    Total plated holes count 236


Drill file 'gimbal-one-budget-NPTH.drl' contains
    unplated through holes:
    =============================================================
    T1  2.700mm  0.1063"  (4 holes))

    Total unplated holes count 4