mohan-bee/drone

This code defines the physical hardware layout and component placements for a drone's circuit board, including outlines, cutouts, and detailed PCB footprints for various electronic components like microcontrollers, sensors, connectors, and passive devices.
Version: 1.0.11
License: unset
Stars: 0
work/schematic-placement-final.txt

Detected entrypoint: 'index.circuit.tsx'
<SchematicBoxPositions>
<SchematicBoxPlacement componentName="J1" positionAnchor="center" schX="-19.86" schY="-5.505" width="1.7" height="3.2" />
<SchematicBoxPlacement componentName="D1" positionAnchor="center" schX="-19.535" schY="-1.965" width="1.04" height="0.54" />
<SchematicBoxPlacement componentName="U2" positionAnchor="center" schX="-16.705" schY="-2" width="1.4" height="1" />
<SchematicBoxPlacement componentName="U1" positionAnchor="center" schX="-14.685" schY="-4.405" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="U3" positionAnchor="center" schX="-17.21" schY="-8.71" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="C1" positionAnchor="center" schX="-19.835" schY="-9.01" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C2" positionAnchor="center" schX="-15.14" schY="-9.11" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C3" positionAnchor="center" schX="-14.605" schY="-6.215" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="LED1" positionAnchor="center" schX="-16.815" schY="-6.14" width="0.65" height="1.13" />
<SchematicBoxPlacement componentName="R1" positionAnchor="center" schX="-16.815" schY="-4.6" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="SW1" positionAnchor="center" schX="-19.26" schY="-10.9" width="0.5" height="0.76" />
<SchematicBoxPlacement componentName="R2" positionAnchor="center" schX="-21.6" schY="-2" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="IC1" positionAnchor="center" schX="-7.28" schY="-3.817" width="1.3" height="1.2" />
<SchematicBoxPlacement componentName="RPROG1" positionAnchor="center" schX="-9.32" schY="-3.917" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R3" positionAnchor="center" schX="-5.23" schY="-3.918" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="R4" positionAnchor="center" schX="-5.24" schY="-5.208" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="LED2" positionAnchor="center" schX="-4.93" schY="-2.388" width="0.65" height="1.13" />
<SchematicBoxPlacement componentName="LED3" positionAnchor="center" schX="-3.69" schY="-4.968" width="0.65" height="1.13" />
<SchematicBoxPlacement componentName="C4" positionAnchor="center" schX="-9.955" schY="-7.037" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C5" positionAnchor="center" schX="-9.955" schY="-8.848" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="J3" positionAnchor="center" schX="-7.33" schY="-7.532" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="U4" positionAnchor="center" schX="-8.03" schY="-9.872" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="U5" positionAnchor="center" schX="-9.875" schY="-10.657" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="U6" positionAnchor="center" schX="5.68" schY="-7.492" width="1.3" height="3.2" />
<SchematicBoxPlacement componentName="C6" positionAnchor="center" schX="3.39" schY="-3.987" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C7" positionAnchor="center" schX="4.63" schY="-3.987" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C8" positionAnchor="center" schX="0.96" schY="-7.502" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R5" positionAnchor="center" schX="3.64" schY="-7.192" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R6" positionAnchor="center" schX="2.65" schY="-8.492" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R7" positionAnchor="center" schX="2.33" schY="-7.202" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="R8" positionAnchor="center" schX="7.73" schY="-6.792" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="R9" positionAnchor="center" schX="7.72" schY="-8.082" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="U7" positionAnchor="center" schX="10.265" schY="-6.892" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="U8" positionAnchor="center" schX="19.055" schY="-7.295" width="1.2" height="4.2" />
<SchematicBoxPlacement componentName="C9" positionAnchor="center" schX="16.43" schY="-5.495" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C10" positionAnchor="center" schX="15.19" schY="-5.495" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C11" positionAnchor="center" schX="16.43" schY="-7.305" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R10" positionAnchor="center" schX="16.915" schY="-3.685" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R11" positionAnchor="center" schX="21.6" schY="-5.768" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="U9" positionAnchor="center" schX="-9.222" schY="-24.677" width="1.3" height="2.8" />
<SchematicBoxPlacement componentName="C12" positionAnchor="center" schX="-11.341" schY="-25.577" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C13" positionAnchor="center" schX="-7.102" schY="-24.877" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="C14" positionAnchor="center" schX="-10.883" schY="-18.572" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R12" positionAnchor="center" schX="-8.924" schY="-18.572" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R13" positionAnchor="center" schX="-11.262" schY="-24.207" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R14" positionAnchor="center" schX="-7.043" schY="-19.167" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="J8" positionAnchor="center" schX="-9.222" schY="-20.877" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="J9" positionAnchor="center" schX="-12.431" schY="-20.877" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="T1" positionAnchor="center" schX="0.151" schY="-20.725" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="R18" positionAnchor="center" schX="-2.394" schY="-21.725" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="D2" positionAnchor="center" schX="6.091" schY="-21.725" width="1.04" height="0.54" />
<SchematicBoxPlacement componentName="C15" positionAnchor="center" schX="5.871" schY="-23.685" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="J2" positionAnchor="center" schX="3.361" schY="-20.825" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="T2" positionAnchor="center" schX="0.151" schY="-23.525" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="R19" positionAnchor="center" schX="-2.394" schY="-23.535" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="D3" positionAnchor="center" schX="6.091" schY="-25.645" width="1.04" height="0.54" />
<SchematicBoxPlacement componentName="C16" positionAnchor="center" schX="5.871" schY="-27.605" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="J5" positionAnchor="center" schX="3.361" schY="-23.625" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="T3" positionAnchor="center" schX="0.151" schY="-17.925" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="R20" positionAnchor="center" schX="-1.989" schY="-16.315" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="D4" positionAnchor="center" schX="2.476" schY="-15.685" width="1.04" height="0.54" />
<SchematicBoxPlacement componentName="C17" positionAnchor="center" schX="4.506" schY="-15.605" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="J6" positionAnchor="center" schX="3.361" schY="-18.025" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="T4" positionAnchor="center" schX="0.151" schY="-26.325" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="R21" positionAnchor="center" schX="-2.394" schY="-25.345" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="D5" positionAnchor="center" schX="1.037" schY="-28.665" width="1.04" height="0.54" />
<SchematicBoxPlacement componentName="C18" positionAnchor="center" schX="-0.993" schY="-28.745" width="0.6" height="0.65" />
<SchematicBoxPlacement componentName="J4" positionAnchor="center" schX="3.361" schY="-26.425" width="1.2" height="0.8" />
<SchematicBoxPlacement componentName="LED4" positionAnchor="center" schX="12.466" schY="-19.637" width="1.13" height="0.65" />
<SchematicBoxPlacement componentName="LED5" positionAnchor="center" schX="12.466" schY="-22.037" width="1.13" height="0.65" />
<SchematicBoxPlacement componentName="LED6" positionAnchor="center" schX="12.466" schY="-24.437" width="1.13" height="0.65" />
<SchematicBoxPlacement componentName="R15" positionAnchor="center" schX="10.937" schY="-19.937" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R16" positionAnchor="center" schX="10.937" schY="-22.337" width="0.65" height="0.6" />
<SchematicBoxPlacement componentName="R17" positionAnchor="center" schX="10.937" schY="-24.737" width="0.65" height="0.6" />
</SchematicBoxPositions>
<SchematicPlacementIssues>
<CapacitorSymbolHorizontal componentName="C15" schX="5.871" schY="-23.685" width="0.6" height="0.65" message="Use schOrientation="vertical" on this capacitor to fix the symbol orientation" />
<CapacitorSymbolHorizontal componentName="C16" schX="5.871" schY="-27.605" width="0.6" height="0.65" message="Use schOrientation="vertical" on this capacitor to fix the symbol orientation" />
<CapacitorSymbolHorizontal componentName="C17" schX="4.506" schY="-15.605" width="0.6" height="0.65" message="Use schOrientation="vertical" on this capacitor to fix the symbol orientation" />
<CapacitorSymbolHorizontal componentName="C18" schX="-0.993" schY="-28.745" width="0.6" height="0.65" message="Use schOrientation="vertical" on this capacitor to fix the symbol orientation" />
<GenericSchematicBoxTooWide message="Shrink schematic box width" componentName="J1" currentSchWidth="1.7" measuredInnerLabelHorizontalEmptySpace="1.125" maxAllowedInnerLabelHorizontalEmptySpace="1" suggestedSchWidth="1.575" />
<GenericSchematicBoxTooWide message="Shrink schematic box width" componentName="U2" currentSchWidth="1.4" measuredInnerLabelHorizontalEmptySpace="1.01" maxAllowedInnerLabelHorizontalEmptySpace="1" suggestedSchWidth="1.39" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box width" componentName="J1" pinSide="bottom" edgeSide="left" pinName="pin13" measuredPadding="0.475" maxAllowedPadding="0.2" excessPadding="0.275" suggestedSchWidth="1.15" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box width" componentName="J1" pinSide="bottom" edgeSide="right" pinName="pin16" measuredPadding="0.625" maxAllowedPadding="0.2" excessPadding="0.425" suggestedSchWidth="0.85" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U2" pinSide="left" edgeSide="top" pinName="G" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U2" pinSide="left" edgeSide="bottom" pinName="S" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U2" pinSide="right" edgeSide="top" pinName="D" measuredPadding="0.5" maxAllowedPadding="0.2" excessPadding="0.3" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U2" pinSide="right" edgeSide="bottom" pinName="D" measuredPadding="0.5" maxAllowedPadding="0.2" excessPadding="0.3" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U3" pinSide="right" edgeSide="top" pinName="OUT" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U3" pinSide="right" edgeSide="bottom" pinName="BYP" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="IC1" pinSide="right" edgeSide="top" pinName="EP" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="1" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="IC1" pinSide="right" edgeSide="bottom" pinName="STDBY" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="1" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J3" pinSide="left" edgeSide="top" pinName="pin1" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J3" pinSide="left" edgeSide="bottom" pinName="pin2" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J3" pinSide="right" edgeSide="top" pinName="pin4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J3" pinSide="right" edgeSide="bottom" pinName="pin3" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U6" pinSide="right" edgeSide="top" pinName="EP" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="3" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U6" pinSide="right" edgeSide="bottom" pinName="pin16" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="3" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U8" pinSide="right" edgeSide="top" pinName="GND4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U8" pinSide="right" edgeSide="bottom" pinName="pin21" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U9" pinSide="right" edgeSide="top" pinName="EP" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="2.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="U9" pinSide="right" edgeSide="bottom" pinName="NC5" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="2.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T1" pinSide="left" edgeSide="top" pinName="G" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T1" pinSide="left" edgeSide="bottom" pinName="S" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T1" pinSide="right" edgeSide="top" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T1" pinSide="right" edgeSide="bottom" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J2" pinSide="left" edgeSide="top" pinName="pin1" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J2" pinSide="left" edgeSide="bottom" pinName="pin2" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J2" pinSide="right" edgeSide="top" pinName="pin4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J2" pinSide="right" edgeSide="bottom" pinName="pin3" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T2" pinSide="left" edgeSide="top" pinName="G" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T2" pinSide="left" edgeSide="bottom" pinName="S" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T2" pinSide="right" edgeSide="top" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T2" pinSide="right" edgeSide="bottom" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J5" pinSide="left" edgeSide="top" pinName="pin1" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J5" pinSide="left" edgeSide="bottom" pinName="pin2" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J5" pinSide="right" edgeSide="top" pinName="pin4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J5" pinSide="right" edgeSide="bottom" pinName="pin3" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T3" pinSide="left" edgeSide="top" pinName="G" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T3" pinSide="left" edgeSide="bottom" pinName="S" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T3" pinSide="right" edgeSide="top" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T3" pinSide="right" edgeSide="bottom" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J6" pinSide="left" edgeSide="top" pinName="pin1" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J6" pinSide="left" edgeSide="bottom" pinName="pin2" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J6" pinSide="right" edgeSide="top" pinName="pin4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J6" pinSide="right" edgeSide="bottom" pinName="pin3" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T4" pinSide="left" edgeSide="top" pinName="G" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T4" pinSide="left" edgeSide="bottom" pinName="S" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T4" pinSide="right" edgeSide="top" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="T4" pinSide="right" edgeSide="bottom" pinName="D" measuredPadding="0.4" maxAllowedPadding="0.2" excessPadding="0.2" suggestedSchHeight="0.4" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J4" pinSide="left" edgeSide="top" pinName="pin1" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J4" pinSide="left" edgeSide="bottom" pinName="pin2" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J4" pinSide="right" edgeSide="top" pinName="pin4" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicPinPaddingToEdgeTooLarge message="Move schematic pins closer to the box edge or change the schematic box height" componentName="J4" pinSide="right" edgeSide="bottom" pinName="pin3" measuredPadding="0.3" maxAllowedPadding="0.2" excessPadding="0.1" suggestedSchHeight="0.6" />
<SchematicBoxInnerLabelCollision message="Inner labels are colliding. Increase the schWidth or schHeight." componentName="U8" currentSchWidth="1.2" currentSchHeight="4.2" overlappingSides="left,right" />
<DiodeResistorNotAligned diodeComponentName="LED2" diodePin="cathode" resistorComponentName="R3" resistorPin="cathode" message="LED2.cathode and R3.cathode face away from each other — rotate LED2 so LED2.cathode faces R3.cathode" />
<DiodeResistorNotAligned diodeComponentName="LED3" diodePin="cathode" resistorComponentName="R4" resistorPin="anode" message="LED3.cathode and R4.anode face away from each other — rotate LED3 so LED3.cathode faces R4.anode" />
<DiodeResistorNotAligned diodeComponentName="LED4" diodePin="anode" resistorComponentName="R15" resistorPin="cathode" message="LED4.anode and R15.cathode face away from each other — rotate LED4 so LED4.anode faces R15.cathode" />
<DiodeResistorNotAligned diodeComponentName="LED5" diodePin="anode" resistorComponentName="R16" resistorPin="cathode" message="LED5.anode and R16.cathode face away from each other — rotate LED5 so LED5.anode faces R16.cathode" />
<DiodeResistorNotAligned diodeComponentName="LED6" diodePin="anode" resistorComponentName="R17" resistorPin="cathode" message="LED6.anode and R17.cathode face away from each other — rotate LED6 so LED6.anode faces R17.cathode" />
<DiodeResistorNotAligned diodeComponentName="D1" diodePin="cathode" resistorComponentName="R2" resistorPin="anode" message="trace has corners — align D1 and R2 on same axis and rotate so D1.cathode faces R2.anode" />
<ComponentNetLabelCollision pair1="C12/U9" pair2="J9/J8" pair3="D5/C18">
  <SuggestedFix note="Apply all moves simultaneously. Set schAutoLayoutEnabled on your circuit.">
    <Move componentName="C12" newSchX="-11.43" newSchY="-25.58" />
    <Move componentName="U9" newSchX="-9.13" newSchY="-24.68" />
    <Move componentName="J9" newSchX="-12.64" newSchY="-20.88" />
    <Move componentName="J8" newSchX="-9.02" newSchY="-20.88" />
    <Move componentName="C18" newSchX="-1.21" newSchY="-28.74" />
    <Move componentName="D5" newSchX="1.25" newSchY="-28.66" />
  </SuggestedFix>
</ComponentNetLabelCollision>
</SchematicPlacementIssues>