krishnax12/usb-c-control-dial

USB-C control dial PCB with an EC11 push encoder and a 16-LED ring for volume and brightness controls. Work in progress; firmware not included and not fabrication-ready.

Version: 0.0.3
License: unset
Stars: 1

outputs/repro/pcb-check-summary.json

PCB

Schematic

{
  "nativePcbErrors": 0,
  "nativePcbWarnings": 3,
  "independentPcbErrors": 0,
  "independentPcbWarnings": 3,
  "otherIndependentFindings": 0,
  "traces": 132,
  "remainingFindings": [
    {
      "type": "pcb_trace_style_warning",
      "message": ".D6 > .DOUT to net.PIXEL_6 has a 5.30 mm segment on bottom at 124.36°, 10.64° from the nearest allowed direction (135°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°)."
    },
    {
      "type": "pcb_trace_style_warning",
      "message": ".C3 > .pin1 to net.V5 has a 6.19 mm segment on bottom at 245.76°, 20.76° from the nearest allowed direction (225°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°)."
    },
    {
      "type": "pcb_trace_style_warning",
      "message": ".U1 > .pin18 to net.GND has a 5.25 mm segment on bottom at 298.16°, 16.84° from the nearest allowed direction (315°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°)."
    }
  ]
}