imrishabh18/rp2040-motor-controller

reports/publish-checks.log

$ bun scripts/check-built.ts
Errors: 0
Warnings: 228
- source_refdes_convention_warning: The "Y" prefix is being used with a <chip />, try using it with a <crystal />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- pcb_trace_warning: Trace [.DRIVER > .VMB to .DRIVER > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.C_VMA > .pin1 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .GND2 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .V3P3OUT to .C_DRV_3V3 > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin1 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin2 to .R_DRV_REF_BOTTOM > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.R_DRV_REF_BOTTOM > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.DRIVER > .AVREF to .DRIVER > .BVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.C_DRV_REF > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.DRIVER > .MODE2 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .nENBL to .R_DRV_ENABLE_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_ENABLE_PU > .pin2 to .MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO20 to .MCU_GPIO20_ESCAPE > .top] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.MCU_GPIO20_ESCAPE > .bottom to .DRIVER > .nRESET] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO21 to .DRIVER > .nENBL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .J_MOTOR_USB > .B4A9] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.F_MOTOR_VBUS > .pin2 to .D_MOTOR_BLOCK > .anode] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .F_MOTOR_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_MOTOR_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .D_MOTOR_TVS > .cathode] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .VM to .C_VM_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .VMB to .C_VM_HF > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .EP to .MCU > .layout_MCU__rp2040 > .U1 > .GND] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .GND1 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A1B12 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B1A12 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH1 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH2 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH3 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH4 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT1 to .R_PHASE_A > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.35mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT2 to .J1 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.37mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT1 to .R_PHASE_B > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT2 to .J1 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.49mm).
- pcb_trace_warning: Trace [.DRIVER > .AISEN to .R_ISEN_A > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.DRIVER > .BISEN to .R_ISEN_B > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.R_FAULT_PU > .pin2 to .MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO26_ADC0 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .U1 > .GPIO27_ADC1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .ADD0 to .U_TEMP > .GND] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .V_POS to .MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_TEMP > .pin1 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin1 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_MCU_ENABLE_PD > .pin2 to .R_SLEEP_PD > .pin2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_BUZZER > .D to .BZ1 > ._NEG] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.BZ1 > ._POS to .MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_BUZZER > .anode to .Q_BUZZER > .D] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_BUZZER > .cathode to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_BUZZER > .pin1 to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin2 to .J1 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_A > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_A > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_CURRENT_A > .OUT to .R_ADC_A > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin2 to .J1 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.685mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_CURRENT_B > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_B > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__usb > .J_USB > .A4B9 to .D_STATUS > ._POS] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.R_STATUS_R > .pin2 to .Q_STATUS_R > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
- pcb_trace_warning: Trace [.TP_PD > .pin1 to .J_MOTOR_USB > .A4B9] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.TP_VMOTOR > .pin1 to .D_MOTOR_BLOCK > .cathode] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.MCU > .layout_MCU__rp2040 > .L_AVDD > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_ENCODER > .VDD3V3 to .U_ENCODER > .VDD5V] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER_BULK > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SDA > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SCL > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG1 > .OUT to .U_PD > .CFG1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG1 > .OUT to .R_PD_CFG1_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .U_PD > .CFG2] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .R_PD_CFG2_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
- pcb_trace_warning: Trace [.Q_PD_CFG3 > .OUT to .U_PD > .CFG3] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.Q_PD_CFG3 > .OUT to .R_PD_CFG3_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- source_component_pins_underspecified_warning: All pins on Q_PD_ENABLE are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH1 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH2 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH3 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH4 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_BUZZER are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on D_STATUS are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_R are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_G are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_B are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: Y1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: DRIVER has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_ENABLE has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_TEMP has no pin with requires_power=true
- source_no_power_pin_defined_warning: BZ1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_BUZZER has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_A has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: D_STATUS has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_R has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_G has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_ENCODER has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG3 has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_PD_ENABLE has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: U_TEMP has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: BZ1 has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_BUZZER has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: D_STATUS has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_R has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_G has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_B has no pin with requires_ground=true
- schematic_component_styling_warning: Q_STATUS_R is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_G is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_B is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#122(.layout_MCU__clock>.Y1) /> (jlcpcb:C20625731): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#519(.layout_MCU__programming_bypass>.C_FLASH) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#480(.layout_MCU__controls>.R_PWR_LED) /> (jlcpcb:C25104): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#467(.layout_MCU__controls>.R_BOOT) /> (jlcpcb:C25744): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <led#452(.layout_MCU__controls>.D_PWR) /> (jlcpcb:C965799): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <pushbutton#433(.layout_MCU__controls>.SW_RUN) /> (jlcpcb:C139797): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <pushbutton#414(.layout_MCU__controls>.SW_BOOT) /> (jlcpcb:C139797): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#401(.layout_MCU__controls>.R_RUN) /> (jlcpcb:C25744): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <inductor#396(.layout_MCU__rp2040>.L_AVDD) /> (jlcpcb:C19330): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#384(.layout_MCU__rp2040>.C_DVDD2) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#372(.layout_MCU__rp2040>.C_DVDD1) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#360(.layout_MCU__rp2040>.C_CORE) /> (jlcpcb:C52923): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#302(.layout_MCU__rp2040>.U1) /> (jlcpcb:C2040): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#290(.layout_MCU__rp2040>.C_ADC) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#278(.layout_MCU__rp2040>.C_IOVDD6) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#266(.layout_MCU__rp2040>.C_IOVDD5) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#254(.layout_MCU__rp2040>.C_IOVDD4) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#242(.layout_MCU__rp2040>.C_IOVDD3) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#230(.layout_MCU__rp2040>.C_IOVDD2) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#218(.layout_MCU__rp2040>.C_IOVDD1) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#204(.layout_MCU__programming_supply>.C_VBUS) /> (jlcpcb:C19702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#198(.layout_MCU__programming_supply>.U3) /> (jlcpcb:C23380830): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#185(.layout_MCU__programming_supply>.R_3V3_EN) /> (jlcpcb:C25741): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <diode#169(.layout_MCU__programming_supply>.D_VBUS) /> (jlcpcb:C8598): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#154(.layout_MCU__clock>.R_XOUT) /> (jlcpcb:C11702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#142(.layout_MCU__clock>.C_XOUT) /> (jlcpcb:C1548): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#130(.layout_MCU__clock>.C_XIN) /> (jlcpcb:C1548): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#531(.layout_MCU__programming_bypass>.C_USB_VDD) /> (jlcpcb:C1525): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#640(.layout_MCU__programming_flash>.U2) /> (jlcpcb:C2843335): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#625(.layout_MCU__usb>.R_USB2) /> (jlcpcb:C25100): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#612(.layout_MCU__usb>.R_USB1) /> (jlcpcb:C25100): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#599(.layout_MCU__usb>.R_CC2) /> (jlcpcb:C25905): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#586(.layout_MCU__usb>.R_CC1) /> (jlcpcb:C25905): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <connector#569(.layout_MCU__usb>.J_USB) /> (jlcpcb:C165948): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#555(.layout_MCU__programming_bypass>.C_USB) /> (jlcpcb:C52923): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#543(.layout_MCU__programming_bypass>.C_3V3) /> (jlcpcb:C19702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#760(.layout_motor_driver_core>.DRIVER) /> (jlcpcb:C81582): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#877(.layout_motor_driver_core>.C_DRV_REF) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#864(.layout_motor_driver_core>.R_DRV_REF_BOTTOM) /> (jlcpcb:C4109): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#851(.layout_motor_driver_core>.R_DRV_REF_TOP) /> (jlcpcb:C25882): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#839(.layout_motor_driver_core>.C_DRV_3V3) /> (jlcpcb:C480644): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#827(.layout_motor_driver_core>.C_VMA) /> (jlcpcb:C960916): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#814(.layout_motor_driver_core>.R_VCP) /> (jlcpcb:C26083): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#802(.layout_motor_driver_core>.C_VCP) /> (jlcpcb:C960916): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#790(.layout_motor_driver_core>.C_CP) /> (jlcpcb:C15195): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#889(.layout_motor_driver_core>.R_DRV_ENABLE_PU) /> (jlcpcb:C25744): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#978(.layout_motor_driver_core>.R_PD_ENABLE_PU) /> (jlcpcb:C25741): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#974(.layout_motor_driver_core>.Q_PD_ENABLE) /> (jlcpcb:C85202): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#961(.layout_motor_driver_core>.R_FAULT_PU) /> (jlcpcb:C25744): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#948(.layout_motor_driver_core>.R_SLEEP_PD) /> (jlcpcb:C25741): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#937(.layout_motor_driver_core>.R_ISEN_B) /> (jlcpcb:C5127777): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#926(.layout_motor_driver_core>.R_ISEN_A) /> (jlcpcb:C5127777): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#914(.layout_motor_driver_core>.C_VM_HF) /> (jlcpcb:C960916): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#902(.layout_motor_driver_core>.C_VM_BULK) /> (jlcpcb:C13585): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <connector#993(.layout_motor_power_pd_negotiation>.J_MOTOR_USB) /> (jlcpcb:C165948): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1123(.layout_thermal_protection>.U_TEMP) /> (jlcpcb:C99269): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <diode#1105(.layout_motor_power_filtering>.D_MOTOR_TVS) /> (jlcpcb:C1975329): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1102(.layout_motor_power_filtering>.C_MOTOR_BULK) /> (jlcpcb:C5981428): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1090(.layout_motor_power_filtering>.C_PD_VBUS) /> (jlcpcb:C13585): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <fuse#1078(.layout_motor_power_filtering>.F_MOTOR_VBUS) /> (jlcpcb:C960026): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <diode#1069(.layout_motor_power_filtering>.D_MOTOR_BLOCK) /> (jlcpcb:C478000): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <connector#1062(.layout_motor_driver_outputs>.J1) /> (jlcpcb:C131334): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1047(.layout_motor_power_pd_negotiation>.R_PD_VBUS) /> (jlcpcb:C25744): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1034(.layout_motor_power_pd_negotiation>.R_PD_VDD) /> (jlcpcb:C844867): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1022(.layout_motor_power_pd_negotiation>.C_PD_VDD) /> (jlcpcb:C15849): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1010(.layout_motor_power_pd_negotiation>.U_PD) /> (jlcpcb:C970725): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1130(.layout_thermal_protection>.C_TEMP) /> (jlcpcb:C1525): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1168(.layout_thermal_protection>.R_MCU_ENABLE_PD) /> (jlcpcb:C25741): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1155(.layout_thermal_protection>.R_TEMP_SCL) /> (jlcpcb:C25900): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1142(.layout_thermal_protection>.R_TEMP_SDA) /> (jlcpcb:C25900): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1326(.layout_alarm>.BZ1) /> (jlcpcb:C7544813): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1397(.layout_phase_A>.R_PHASE_A) /> (jlcpcb:C7467249): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1359(.layout_feedback_supply>.C_BUZZER) /> (jlcpcb:C19702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1344(.layout_alarm>.R_BUZZER_PD) /> (jlcpcb:C25741): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1331(.layout_alarm>.R_BUZZER_GATE) /> (jlcpcb:C25076): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <diode#1328(.layout_alarm>.D_BUZZER) /> (jlcpcb:C8598): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1327(.layout_alarm>.Q_BUZZER) /> (jlcpcb:C20917): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1408(.layout_phase_A>.U_CURRENT_A) /> (jlcpcb:C2060769): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1490(.layout_phase_B>.R_ADC_B) /> (jlcpcb:C11702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1481(.layout_phase_B>.U_CURRENT_B) /> (jlcpcb:C2060769): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1470(.layout_phase_B>.R_PHASE_B) /> (jlcpcb:C7467249): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1456(.layout_current_supply>.C_CURRENT_B) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1444(.layout_current_supply>.C_CURRENT_A) /> (jlcpcb:C1525): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1430(.layout_phase_A>.C_ADC_A) /> (jlcpcb:C15195): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1417(.layout_phase_A>.R_ADC_A) /> (jlcpcb:C11702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#1503(.layout_phase_B>.C_ADC_B) /> (jlcpcb:C15195): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1545(.layout_rgb>.Q_STATUS_G) /> (jlcpcb:C509876): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1532(.layout_rgb>.R_STATUS_G) /> (jlcpcb:C11702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1531(.layout_rgb>.Q_STATUS_R) /> (jlcpcb:C509876): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1518(.layout_rgb>.R_STATUS_R) /> (jlcpcb:C11702): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1517(.layout_rgb>.D_STATUS) /> (jlcpcb:C458749): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1546(.layout_rgb>.R_STATUS_B) /> (jlcpcb:C11702): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1600(.layout_pd_gpio_buffers>.R_PD_CFG1_PU) /> (jlcpcb:C25792): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1599(.layout_pd_gpio_buffers>.Q_PD_CFG1) /> (jlcpcb:C79605): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1584(.layout_encoder>.R_ENC_SCL) /> (jlcpcb:C25900): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1571(.layout_encoder>.R_ENC_SDA) /> (jlcpcb:C25900): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1559(.layout_rgb>.Q_STATUS_B) /> (jlcpcb:C509876): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1613(.layout_pd_gpio_buffers>.Q_PD_CFG2) /> (jlcpcb:C79605): Was there a typo in the url or port?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1628(.layout_pd_gpio_buffers>.R_PD_CFG3_PU) /> (jlcpcb:C25792): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <chip#1627(.layout_pd_gpio_buffers>.Q_PD_CFG3) /> (jlcpcb:C79605): Unable to connect. Is the computer able to access the url?
- source_part_not_found_warning: Failed to fetch supplier footprint for <resistor#1614(.layout_pd_gpio_buffers>.R_PD_CFG2_PU) /> (jlcpcb:C25792): Unable to connect. Is the computer able to access the url?

No shorts detected in circuit.json