imrishabh18/rp2040-motor-controller

reports/check-built.log

$ bun scripts/check-built.ts
Errors: 0
Warnings: 190
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- source_refdes_convention_warning: The "Q" prefix is being used with a <chip />, try using it with a <transistor />
- pcb_trace_warning: Trace [.DRIVER > .VMB to .DRIVER > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.C_VMA > .pin1 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .GND2 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .V3P3OUT to .C_DRV_3V3 > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin1 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_REF_TOP > .pin2 to .R_DRV_REF_BOTTOM > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.R_DRV_REF_BOTTOM > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.DRIVER > .AVREF to .DRIVER > .BVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.C_DRV_REF > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
- pcb_trace_warning: Trace [.DRIVER > .MODE2 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .nENBL to .R_DRV_ENABLE_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_DRV_ENABLE_PU > .pin2 to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .U1 > .GPIO20 to .MCU_GPIO20_ESCAPE > .top] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.MCU_GPIO20_ESCAPE > .bottom to .DRIVER > .nRESET] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.MCU > .U1 > .GPIO21 to .DRIVER > .nENBL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .J_MOTOR_USB > .B4A9] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.F_MOTOR_VBUS > .pin2 to .D_MOTOR_BLOCK > .anode] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A4B9 to .F_MOTOR_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .C_MOTOR_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_MOTOR_BLOCK > .cathode to .D_MOTOR_TVS > .cathode] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .VM to .C_VM_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .VMB to .C_VM_HF > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.DRIVER > .EP to .MCU > .U1 > .GND] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .GND1 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .A1B12 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .B1A12 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH1 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH2 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH3 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.J_MOTOR_USB > .EH4 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_PD > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT1 to .R_PHASE_A > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.35mm).
- pcb_trace_warning: Trace [.DRIVER > .AOUT2 to .J1 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.37mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT1 to .R_PHASE_B > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.DRIVER > .BOUT2 to .J1 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.49mm).
- pcb_trace_warning: Trace [.DRIVER > .AISEN to .R_ISEN_A > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.DRIVER > .BISEN to .R_ISEN_B > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
- pcb_trace_warning: Trace [.R_FAULT_PU > .pin2 to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .U1 > .GPIO26_ADC0 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .U1 > .GPIO27_ADC1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .ADD0 to .U_TEMP > .GND] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_TEMP > .V_POS to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_TEMP > .pin1 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin1 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SDA > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_TEMP_SCL > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_MCU_ENABLE_PD > .pin2 to .R_SLEEP_PD > .pin2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_BUZZER > .D to .BZ1 > ._NEG] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.BZ1 > ._POS to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.D_BUZZER > .anode to .Q_BUZZER > .D] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.D_BUZZER > .cathode to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_BUZZER > .pin1 to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_PHASE_A > .pin2 to .J1 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_A > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_A > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_CURRENT_A > .OUT to .R_ADC_A > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
- pcb_trace_warning: Trace [.R_PHASE_B > .pin2 to .J1 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.685mm).
- pcb_trace_warning: Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_B > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_CURRENT_B > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.MCU > .J_USB > .A4B9 to .D_STATUS > ._POS] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.R_STATUS_R > .pin2 to .Q_STATUS_R > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
- pcb_trace_warning: Trace [.TP_PD > .pin1 to .J_MOTOR_USB > .A4B9] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.TP_VMOTOR > .pin1 to .D_MOTOR_BLOCK > .cathode] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
- pcb_trace_warning: Trace [.MCU > .L_AVDD > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.U_ENCODER > .VDD3V3 to .U_ENCODER > .VDD5V] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.C_ENCODER_BULK > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SDA > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.R_ENC_SCL > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG1 > .OUT to .U_PD > .CFG1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG1 > .OUT to .R_PD_CFG1_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .U_PD > .CFG2] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
- pcb_trace_warning: Trace [.Q_PD_CFG2 > .OUT to .R_PD_CFG2_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
- pcb_trace_warning: Trace [.Q_PD_CFG3 > .OUT to .U_PD > .CFG3] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- pcb_trace_warning: Trace [.Q_PD_CFG3 > .OUT to .R_PD_CFG3_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
- source_component_pins_underspecified_warning: All pins on Q_PD_ENABLE are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH1 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH2 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH3 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on MH4 are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_BUZZER are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on D_STATUS are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_R are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_G are underspecified (no pinAttributes set)
- source_component_pins_underspecified_warning: All pins on Q_STATUS_B are underspecified (no pinAttributes set)
- source_no_power_pin_defined_warning: DRIVER has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_ENABLE has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_TEMP has no pin with requires_power=true
- source_no_power_pin_defined_warning: BZ1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_BUZZER has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_A has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_CURRENT_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: D_STATUS has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_R has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_G has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_STATUS_B has no pin with requires_power=true
- source_no_power_pin_defined_warning: U_ENCODER has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG1 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG2 has no pin with requires_power=true
- source_no_power_pin_defined_warning: Q_PD_CFG3 has no pin with requires_power=true
- source_no_ground_pin_defined_warning: Q_PD_ENABLE has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: U_TEMP has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: BZ1 has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_BUZZER has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: D_STATUS has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_R has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_G has no pin with requires_ground=true
- source_no_ground_pin_defined_warning: Q_STATUS_B has no pin with requires_ground=true
- schematic_component_styling_warning: BZ1 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_BUZZER is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: D_STATUS is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_R is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_G is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_STATUS_B is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_PD_CFG1 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_PD_CFG2 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- schematic_component_styling_warning: Q_PD_CFG3 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
- source_part_not_found_warning: Failed to fetch supplier footprint for <capacitor#766 name=".C_MOTOR_BULK" /> (jlcpcb:C5981428): Component not found
- supplier_footprint_mismatch_warning: <capacitor#502(.MCU>.C_XIN) /> footprint "0402" does not match supplier footprint jlcpcb:C1548 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#1371 name=".C_CURRENT_B" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#163(.MCU>.C_FLASH) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#389(.MCU>.R_PWR_LED) /> footprint "0402" does not match supplier footprint jlcpcb:C25104 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#810 name=".R_PD_VBUS" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#922 name=".R_DRV_ENABLE_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#130(.MCU>.C_IOVDD6) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#376(.MCU>.R_BOOT) /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#415(.MCU>.R_CC2) /> footprint "0402" does not match supplier footprint jlcpcb:C25905 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#187(.MCU>.C_ADC) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#118(.MCU>.C_IOVDD5) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#94(.MCU>.C_IOVDD3) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#551(.MCU>.C_DVDD2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#490(.MCU>.C_USB) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#175(.MCU>.C_USB_VDD) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#514(.MCU>.C_XOUT) /> footprint "0402" does not match supplier footprint jlcpcb:C1548 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#106(.MCU>.C_IOVDD4) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#1018 name=".R_FAULT_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#478(.MCU>.C_CORE) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#150(.MCU>.R_RUN) /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#1300 name=".C_CURRENT_A" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#539(.MCU>.C_DVDD1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#910 name=".C_DRV_REF" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#402(.MCU>.R_CC1) /> footprint "0402" does not match supplier footprint jlcpcb:C25905 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#82(.MCU>.C_IOVDD2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#1055 name=".C_TEMP" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#70(.MCU>.C_IOVDD1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#1426 name=".R_STATUS_R" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1662 name=".R_PD_CFG3_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#823 name=".C_CP" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#1444 name=".R_STATUS_G" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#971 name=".C_VM_HF" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#872 name=".C_DRV_3V3" /> footprint "0402" does not match supplier footprint jlcpcb:C480644 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#1325 name=".C_ADC_A" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#1240 name=".R_BUZZER_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1093 name=".R_MCU_ENABLE_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1227 name=".R_BUZZER_GATE" /> footprint "0402" does not match supplier footprint jlcpcb:C25076 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#835 name=".C_VCP" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <capacitor#860 name=".C_VMA" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
- supplier_footprint_mismatch_warning: <resistor#441(.MCU>.R_USB2) /> footprint "0402" does not match supplier footprint jlcpcb:C25100 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1643 name=".R_PD_CFG2_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#428(.MCU>.R_USB1) /> footprint "0402" does not match supplier footprint jlcpcb:C25100 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1080 name=".R_TEMP_SCL" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#884 name=".R_DRV_REF_TOP" /> footprint "0402" does not match supplier footprint jlcpcb:C25882 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1462 name=".R_STATUS_B" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#847 name=".R_VCP" /> footprint "0402" does not match supplier footprint jlcpcb:C26083 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1035 name=".R_PD_ENABLE_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1624 name=".R_PD_CFG1_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#897 name=".R_DRV_REF_BOTTOM" /> footprint "0402" does not match supplier footprint jlcpcb:C4109 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1553 name=".R_ENC_SCL" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1383 name=".R_ADC_B" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1005 name=".R_SLEEP_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#55(.MCU>.R_3V3_EN) /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#526(.MCU>.R_XOUT) /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1067 name=".R_TEMP_SDA" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1312 name=".R_ADC_A" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <resistor#1540 name=".R_ENC_SDA" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
- supplier_footprint_mismatch_warning: <capacitor#1396 name=".C_ADC_B" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).

No shorts detected in circuit.json