imrishabh18/rp2040-motor-controller

reports/build.log

$ tsci build
Building 1 file(s)...
Building index.circuit.tsx...
Generating circuit JSON...
trace: `key` is not a prop. Trying to access it will result in `undefined` being returned. If you need to access the same value within the child component, you should pass it as a different prop. (https://react.dev/link/special-props)
Could not save autorouting paths for subcircuit_source_group_10: Only port-anchored wire/via routes can be saved
Circuit JSON written to dist/index/circuit.json
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
Trace [.DRIVER > .VMB to .DRIVER > .VMA] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.C_VMA > .pin1 to .DRIVER > .VMA] is routed thinner than requested (requested: 0.4mm, actual: 0.15mm).
Trace [.DRIVER > .GND2 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.DRIVER > .V3P3OUT to .C_DRV_3V3 > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_DRV_REF_TOP > .pin1 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_DRV_REF_TOP > .pin2 to .R_DRV_REF_BOTTOM > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
Trace [.R_DRV_REF_BOTTOM > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
Trace [.DRIVER > .AVREF to .DRIVER > .BVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
Trace [.C_DRV_REF > .pin1 to .DRIVER > .AVREF] is routed thinner than requested (requested: 0.15mm, actual: 0.14mm).
Trace [.DRIVER > .MODE2 to .DRIVER > .V3P3OUT] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.DRIVER > .nENBL to .R_DRV_ENABLE_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_DRV_ENABLE_PU > .pin2 to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.MCU > .U1 > .GPIO20 to .MCU_GPIO20_ESCAPE > .top] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
Trace [.MCU_GPIO20_ESCAPE > .bottom to .DRIVER > .nRESET] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
Trace [.MCU > .U1 > .GPIO21 to .DRIVER > .nENBL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .A4B9 to .J_MOTOR_USB > .B4A9] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.D_MOTOR_BLOCK > .cathode to .DRIVER > .VM] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.F_MOTOR_VBUS > .pin2 to .D_MOTOR_BLOCK > .anode] is routed thinner than requested (requested: 0.8mm, actual: 0.3mm).
Trace [.J_MOTOR_USB > .A4B9 to .F_MOTOR_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.D_MOTOR_BLOCK > .cathode to .C_PD_VBUS > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.D_MOTOR_BLOCK > .cathode to .C_MOTOR_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.D_MOTOR_BLOCK > .cathode to .D_MOTOR_TVS > .cathode] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.DRIVER > .VM to .C_VM_BULK > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.DRIVER > .VMB to .C_VM_HF > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.15mm).
Trace [.DRIVER > .EP to .MCU > .U1 > .GND] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.DRIVER > .GND1 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .A1B12 to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .B1A12 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .EH1 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .EH2 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .EH3 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.J_MOTOR_USB > .EH4 to .J_MOTOR_USB > .A1B12] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.U_PD > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.DRIVER > .AOUT1 to .R_PHASE_A > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.35mm).
Trace [.DRIVER > .AOUT2 to .J1 > .pin2] is routed thinner than requested (requested: 1mm, actual: 0.37mm).
Trace [.DRIVER > .BOUT1 to .R_PHASE_B > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.5mm).
Trace [.DRIVER > .BOUT2 to .J1 > .pin4] is routed thinner than requested (requested: 1mm, actual: 0.49mm).
Trace [.DRIVER > .AISEN to .R_ISEN_A > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
Trace [.DRIVER > .BISEN to .R_ISEN_B > .pin1] is routed thinner than requested (requested: 0.8mm, actual: 0.5mm).
Trace [.R_FAULT_PU > .pin2 to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.MCU > .U1 > .GPIO26_ADC0 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.MCU > .U1 > .GPIO27_ADC1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.U_TEMP > .GND to .DRIVER > .EP] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.U_TEMP > .ADD0 to .U_TEMP > .GND] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.U_TEMP > .V_POS to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.C_TEMP > .pin1 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_TEMP_SDA > .pin1 to .U_TEMP > .SDA] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_TEMP_SCL > .pin1 to .U_TEMP > .SCL] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_TEMP_SDA > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_TEMP_SCL > .pin2 to .U_TEMP > .V_POS] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_MCU_ENABLE_PD > .pin2 to .R_SLEEP_PD > .pin2] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.Q_BUZZER > .D to .BZ1 > ._NEG] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
Trace [.BZ1 > ._POS to .MCU > .L_AVDD > .pin1] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.D_BUZZER > .anode to .Q_BUZZER > .D] is routed thinner than requested (requested: 0.3mm, actual: 0.15mm).
Trace [.D_BUZZER > .cathode to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.C_BUZZER > .pin1 to .BZ1 > ._POS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.R_PHASE_A > .pin2 to .J1 > .pin1] is routed thinner than requested (requested: 1mm, actual: 0.15mm).
Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_A > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.C_CURRENT_A > .pin1 to .U_CURRENT_A > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.U_CURRENT_A > .OUT to .R_ADC_A > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
Trace [.R_PHASE_B > .pin2 to .J1 > .pin3] is routed thinner than requested (requested: 1mm, actual: 0.685mm).
Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.MCU > .L_AVDD > .pin1 to .U_CURRENT_B > .REF1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.C_CURRENT_B > .pin1 to .U_CURRENT_B > .VS] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.MCU > .J_USB > .A4B9 to .D_STATUS > ._POS] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
Trace [.R_STATUS_R > .pin2 to .Q_STATUS_R > .C] is routed thinner than requested (requested: 0.15mm, actual: 0.125mm).
Trace [.TP_PD > .pin1 to .J_MOTOR_USB > .A4B9] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
Trace [.TP_VMOTOR > .pin1 to .D_MOTOR_BLOCK > .cathode] is routed thinner than requested (requested: 0.2mm, actual: 0.15mm).
Trace [.MCU > .L_AVDD > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.U_ENCODER > .VDD3V3 to .U_ENCODER > .VDD5V] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.C_ENCODER > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.C_ENCODER_BULK > .pin1 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.3mm, actual: 0.1mm).
Trace [.R_ENC_SDA > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.R_ENC_SCL > .pin2 to .U_ENCODER > .VDD3V3] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.Q_PD_CFG1 > .OUT to .U_PD > .CFG1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.Q_PD_CFG1 > .OUT to .R_PD_CFG1_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.1mm).
Trace [.Q_PD_CFG2 > .OUT to .U_PD > .CFG2] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
Trace [.Q_PD_CFG2 > .OUT to .R_PD_CFG2_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.107mm).
Trace [.Q_PD_CFG3 > .OUT to .U_PD > .CFG3] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
Trace [.Q_PD_CFG3 > .OUT to .R_PD_CFG3_PU > .pin1] is routed thinner than requested (requested: 0.15mm, actual: 0.135mm).
All pins on Q_PD_ENABLE are underspecified (no pinAttributes set)
All pins on MH1 are underspecified (no pinAttributes set)
All pins on MH2 are underspecified (no pinAttributes set)
All pins on MH3 are underspecified (no pinAttributes set)
All pins on MH4 are underspecified (no pinAttributes set)
All pins on Q_BUZZER are underspecified (no pinAttributes set)
All pins on D_STATUS are underspecified (no pinAttributes set)
All pins on Q_STATUS_R are underspecified (no pinAttributes set)
All pins on Q_STATUS_G are underspecified (no pinAttributes set)
All pins on Q_STATUS_B are underspecified (no pinAttributes set)
DRIVER has no pin with requires_power=true
Q_PD_ENABLE has no pin with requires_power=true
U_TEMP has no pin with requires_power=true
BZ1 has no pin with requires_power=true
Q_BUZZER has no pin with requires_power=true
U_CURRENT_A has no pin with requires_power=true
U_CURRENT_B has no pin with requires_power=true
D_STATUS has no pin with requires_power=true
Q_STATUS_R has no pin with requires_power=true
Q_STATUS_G has no pin with requires_power=true
Q_STATUS_B has no pin with requires_power=true
U_ENCODER has no pin with requires_power=true
Q_PD_CFG1 has no pin with requires_power=true
Q_PD_CFG2 has no pin with requires_power=true
Q_PD_CFG3 has no pin with requires_power=true
Q_PD_ENABLE has no pin with requires_ground=true
U_TEMP has no pin with requires_ground=true
BZ1 has no pin with requires_ground=true
Q_BUZZER has no pin with requires_ground=true
D_STATUS has no pin with requires_ground=true
Q_STATUS_R has no pin with requires_ground=true
Q_STATUS_G has no pin with requires_ground=true
Q_STATUS_B has no pin with requires_ground=true
BZ1 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_BUZZER is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
D_STATUS is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_STATUS_R is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_STATUS_G is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_STATUS_B is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_PD_CFG1 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_PD_CFG2 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Q_PD_CFG3 is missing schematic reference designator text. For a custom symbol, add name="{REFDES}" inside the symbol.
Failed to fetch supplier footprint for <capacitor#766 name=".C_MOTOR_BULK" /> (jlcpcb:C5981428): Component not found
<capacitor#502(.MCU>.C_XIN) /> footprint "0402" does not match supplier footprint jlcpcb:C1548 (copper IoU 0.7249).
<capacitor#1371 name=".C_CURRENT_B" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#163(.MCU>.C_FLASH) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#389(.MCU>.R_PWR_LED) /> footprint "0402" does not match supplier footprint jlcpcb:C25104 (copper IoU 0.7741).
<resistor#810 name=".R_PD_VBUS" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
<resistor#922 name=".R_DRV_ENABLE_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
<capacitor#130(.MCU>.C_IOVDD6) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#376(.MCU>.R_BOOT) /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
<resistor#415(.MCU>.R_CC2) /> footprint "0402" does not match supplier footprint jlcpcb:C25905 (copper IoU 0.7741).
<capacitor#187(.MCU>.C_ADC) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#118(.MCU>.C_IOVDD5) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#94(.MCU>.C_IOVDD3) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#551(.MCU>.C_DVDD2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#490(.MCU>.C_USB) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
<capacitor#175(.MCU>.C_USB_VDD) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#514(.MCU>.C_XOUT) /> footprint "0402" does not match supplier footprint jlcpcb:C1548 (copper IoU 0.7249).
<capacitor#106(.MCU>.C_IOVDD4) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#1018 name=".R_FAULT_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
<capacitor#478(.MCU>.C_CORE) /> footprint "0402" does not match supplier footprint jlcpcb:C52923 (copper IoU 0.7249).
<resistor#150(.MCU>.R_RUN) /> footprint "0402" does not match supplier footprint jlcpcb:C25744 (copper IoU 0.7741).
<capacitor#1300 name=".C_CURRENT_A" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#539(.MCU>.C_DVDD1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#910 name=".C_DRV_REF" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#402(.MCU>.R_CC1) /> footprint "0402" does not match supplier footprint jlcpcb:C25905 (copper IoU 0.7741).
<capacitor#82(.MCU>.C_IOVDD2) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#1055 name=".C_TEMP" /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<capacitor#70(.MCU>.C_IOVDD1) /> footprint "0402" does not match supplier footprint jlcpcb:C1525 (copper IoU 0.7249).
<resistor#1426 name=".R_STATUS_R" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<resistor#1662 name=".R_PD_CFG3_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
<capacitor#823 name=".C_CP" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).
<resistor#1444 name=".R_STATUS_G" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<capacitor#971 name=".C_VM_HF" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
<capacitor#872 name=".C_DRV_3V3" /> footprint "0402" does not match supplier footprint jlcpcb:C480644 (copper IoU 0.7249).
<capacitor#1325 name=".C_ADC_A" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).
<resistor#1240 name=".R_BUZZER_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
<resistor#1093 name=".R_MCU_ENABLE_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
<resistor#1227 name=".R_BUZZER_GATE" /> footprint "0402" does not match supplier footprint jlcpcb:C25076 (copper IoU 0.7741).
<capacitor#835 name=".C_VCP" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
<capacitor#860 name=".C_VMA" /> footprint "0402" does not match supplier footprint jlcpcb:C960916 (copper IoU 0.7249).
<resistor#441(.MCU>.R_USB2) /> footprint "0402" does not match supplier footprint jlcpcb:C25100 (copper IoU 0.7741).
<resistor#1643 name=".R_PD_CFG2_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
<resistor#428(.MCU>.R_USB1) /> footprint "0402" does not match supplier footprint jlcpcb:C25100 (copper IoU 0.7741).
<resistor#1080 name=".R_TEMP_SCL" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
<resistor#884 name=".R_DRV_REF_TOP" /> footprint "0402" does not match supplier footprint jlcpcb:C25882 (copper IoU 0.7741).
<resistor#1462 name=".R_STATUS_B" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<resistor#847 name=".R_VCP" /> footprint "0402" does not match supplier footprint jlcpcb:C26083 (copper IoU 0.7741).
<resistor#1035 name=".R_PD_ENABLE_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
<resistor#1624 name=".R_PD_CFG1_PU" /> footprint "0402" does not match supplier footprint jlcpcb:C25792 (copper IoU 0.7741).
<resistor#897 name=".R_DRV_REF_BOTTOM" /> footprint "0402" does not match supplier footprint jlcpcb:C4109 (copper IoU 0.7741).
<resistor#1553 name=".R_ENC_SCL" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
<resistor#1383 name=".R_ADC_B" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<resistor#1005 name=".R_SLEEP_PD" /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
<resistor#55(.MCU>.R_3V3_EN) /> footprint "0402" does not match supplier footprint jlcpcb:C25741 (copper IoU 0.7741).
<resistor#526(.MCU>.R_XOUT) /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<resistor#1067 name=".R_TEMP_SDA" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
<resistor#1312 name=".R_ADC_A" /> footprint "0402" does not match supplier footprint jlcpcb:C11702 (copper IoU 0.7741).
<resistor#1540 name=".R_ENC_SDA" /> footprint "0402" does not match supplier footprint jlcpcb:C25900 (copper IoU 0.7741).
<capacitor#1396 name=".C_ADC_B" /> footprint "0402" does not match supplier footprint jlcpcb:C15195 (copper IoU 0.7249).

Build complete
  Circuits  1 passed
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully