imrishabh18/pcbgolf

A complete 4-layer PCBGolf controller PCB with STM32H7 MCU, USB/SD and CAN interfaces, power regulation, protection, connectors, switches, LEDs, clocking, and supporting passives.

Version
1.6.1
License
unset
Stars
0

footprints/Footprint_0472192001.tsx

// Source: commaai/PCBGolf/pcbgolf.pretty/0472192001.kicad_mod
// Generated by footprints/generate.py. Coordinates are millimetres, +Y up.
export const Footprint_0472192001 = () => (
  <footprint originalLayer="top" insertionDirection="from_above">
    <smtpad name={"pad_1"} pcbX={-3.67} pcbY={2.6} portHints={["pin1","1"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_2"} pcbX={-4.77} pcbY={2.6} portHints={["pin2","2"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_3"} pcbX={-5.87} pcbY={2.6} portHints={["pin3","3"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_4"} pcbX={-6.97} pcbY={2.6} portHints={["pin4","4"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_5"} pcbX={-8.07} pcbY={2.6} portHints={["pin5","5"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_6"} pcbX={-9.17} pcbY={2.6} portHints={["pin6","6"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_7"} pcbX={-10.27} pcbY={2.6} portHints={["pin7","7"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_8"} pcbX={-11.37} pcbY={2.6} portHints={["pin8","8"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.7} height={1.5} />
    <smtpad name={"pad_9"} pcbX={0.0} pcbY={-0.0} portHints={["pin9","G1"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.45} height={2.0} />
    <smtpad name={"pad_10"} pcbX={0.0} pcbY={8.3} portHints={["pin10","G2"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.45} height={2.0} />
    <smtpad name={"pad_11"} pcbX={-13.75} pcbY={8.3} portHints={["pin11","G3"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.45} height={2.0} />
    <smtpad name={"pad_12"} pcbX={-13.75} pcbY={-0.0} portHints={["pin12","G4"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.45} height={2.0} />
    <silkscreenpath route={[{"x":-13.7,"y":11.95},{"x":-13.7,"y":9.6}]} />
    <silkscreenpath route={[{"x":-13.7,"y":11.95},{"x":-0.05,"y":11.95}]} />
    <silkscreenpath route={[{"x":-13.7,"y":1.3},{"x":-13.7,"y":7}]} />
    <silkscreenpath route={[{"x":-13.7,"y":-2.55},{"x":-13.7,"y":-1.3}]} />
    <silkscreenpath route={[{"x":-13.7,"y":-2.55},{"x":-0.05,"y":-2.55}]} />
    <silkscreenpath route={[{"x":-0.05,"y":11.95},{"x":-0.05,"y":9.6}]} />
    <silkscreenpath route={[{"x":-0.05,"y":1.3},{"x":-0.05,"y":7}]} />
    <silkscreenpath route={[{"x":-0.05,"y":-2.55},{"x":-0.05,"y":-1.3}]} />
    <courtyardoutline outline={[{"x":-13.7,"y":-2.6},{"x":-0.1,"y":-2.6},{"x":-0.1,"y":11.9},{"x":-13.7,"y":11.9}]} layer="top" />
  </footprint>
)