imrishabh18/nema17-motor-controller-flex
An RP2040-based USB‑C/USB‑PD controller board that powers and drives a NEMA17 stepper via a DRV8825, with current/temperature/voltage monitoring, optional AS5600 encoder, buzzer/RGB status indicators, QSPI flash, and flexible motor/encoder connections.
- Version
- 1.2.0
- License
- unset
- Stars
- 0
Files in (root)/imports
- jlc
- AO3400A.tsx
- AS5600_ASOM.tsx
- B5819W_SL.tsx
- BSS84.tsx
- CH224K.tsx
- DRV8825PWPR.tsx
- DTC114EETL.tsx
- DTC114EU3HZGT106.tsx
- FRM121WFR050TM.tsx
- HoLRT1206_1W_300mR_1_.tsx
- HYG_8503A.tsx
- INA226AIDGSR.tsx
- INA240A1DR.tsx
- LTST_C19HE1WT.tsx
- MotorSocket6.tsx
- PMEG6020ELRX.tsx
- TCJD226M050R0090E.tsx
- TMP102AIDRLR.tsx
- TYPE_C_31_M_12.tsx
- usb-c-20v.tsx
Related Packages
More from this authorimrishabh18/type-error-build-logThis code defines a 10mm by 10mm PCB layout with a 1kΩ resistor and a 1000pF capacitor connected by a trace, using 0402 surface-mount components.
Similar packageastra/nema17-stepper-motor-controller-spring-clamp-rp2040A 4-layer RP2040 controller board that negotiates USB‑C PD motor power and drives a NEMA17 stepper via a DRV8825, with current sensing, thermal shutdown, RGB status LED, buzzer alarm, optional AS5600 encoder, protection/filtering, and test points.
Discover something newshibosoftwaredev/f1c100s-linux-nema8-stepper-controllerRestores component part numbers and CAD models, removes test-point 3D bodies, and validates that solder paste exists only on top-side SMT pads without altering copper or DRC.