imrishabh18/fitness_watch
This circuit integrates an ESP-12E microcontroller with various sensors, relays, and power management components, including an AO3400A transistor for switching loads, to enable wireless control and sensing functions.
- Version
- 1.0.11
- License
- unset
- Stars
- 0
validation/netlist.log
Errors: 0
Warnings: 0
Readable Netlist:
COMPONENTS:
- U2: ESP-12E
- J1: B2B-PH-K-S(LF)(SN)
- U1: AP2112K_3_3TRG1
- C3: 1uF capacitor
- C4: 1uF capacitor
- R3: 10kΩ resistor
- R4: 10kΩ resistor
- R5: 10kΩ resistor
- R6: 10kΩ resistor
- SW_RST: SW_RST, source_component
- SW_NAV: SW_NAV, source_component
- DS1: HS91L02W2C01
- U4: MPU-6050
- U5: MAX30102EFD+T
- U6: TLV70018DDCR
- M1: LCM1027A2445F
- R14: 10kΩ resistor
- R15: 4.7kΩ resistor
- R16: 4.7kΩ resistor
- R17: 4.7kΩ resistor
- C10: 2.2nF capacitor
- C11: 10nF capacitor
- C15: 4.7uF capacitor
- C8: 100nF capacitor
- C9: 100nF capacitor
- C13: 100nF capacitor
- C16: 100nF capacitor
- C12: 10uF capacitor
- C14: 1uF capacitor
- Q1: AO3400A
- R9: 100Ω resistor
- R13: 100kΩ resistor
- D2: D2, source_component
- J2: J2, source_component
- C6: 100nF capacitor
- C7: 10uF capacitor
NET: VBAT
- C3 pin1
- U1 EN
- U1 VIN
- J1 pin1
NET: U2_EN
- U2 EN
- R3 pin1
NET: R4_pos
- U2 IO15
- R4 pin1
NET: R5_pos
- U2 IO2
- R5 pin1
NET: U2_RST
- U2 RST
- R6 pin1
- SW_RST RESET
NET: U2_TXD
- U2 TXD
- J2 ESP_TX
NET: U2_RXD
- U2 RXD
- J2 ESP_RX
NET: I2C_SCL
- R15 pin1
- U5 SCL
- U4 SCL
- DS1 SCL
- U2 IO5
NET: I2C_SDA
- R16 pin1
- U5 SDA
- U4 SDA
- DS1 SDA
- U2 IO4
NET: V1V8
- C16 pin1 (+)
- C15 pin1 (+)
- U5 VDD
- U6 OUT
NET: HR_INT
- U2 IO12
- R17 pin1
- U5 N_INT
NET: MOTION_INT
- U2 IO13
- U4 INT
NET: U4_REGOUT
- U4 REGOUT
- C8 pin1 (+)
NET: U4_CPOUT
- U4 CPOUT
- C10 pin1 (+)
NET: R14_pos
- U2 IO0
- SW_NAV GPIO0
- R14 pin1
NET: R9_pos
- U2 IO14
- R9 pin1
NET: Q1_G
- R13 pin1
- R9 pin2
- Q1 pin1
NET: GND
- Q1 pin2
- R13 pin2
- C16 pin2 (-)
- C15 pin2 (-)
- C14 pin2 (-)
- C13 pin2 (-)
- C12 pin2 (-)
- C11 pin2 (-)
- C10 pin2 (-)
- C9 pin2 (-)
- C8 pin2 (-)
- U6 GND
- U5 GND
- U5 PGND
- U4 GND
- U4 FSYNC
- U4 AD0
- U4 CLKIN
- DS1 GND
- C7 pin2
- C6 pin2
- J2 GND
- SW_NAV GND
- SW_RST GND
- R4 pin2
- U2 GND
- C4 pin2
- C3 pin2
- U1 GND
- J1 pin2
NET: MOTOR_LOW
- D2 ANODE (+)
- M1 pin1
- Q1 pin3
NET: V3V3
- D2 CATHODE (-)
- M1 pin2
- C14 pin1 (+)
- C13 pin1 (+)
- C12 pin1 (+)
- C11 pin1 (+)
- C9 pin1 (+)
- R17 pin2
- R16 pin2
- R15 pin2
- R14 pin2
- U6 EN
- U6 IN
- U5 VLED_POS2
- U5 VLED_POS1
- U4 VDD
- U4 VLOGIC
- DS1 VCC
- C7 pin1
- C6 pin1
- J2 VCC_3V3
- R6 pin2
- R5 pin2
- R3 pin2
- U2 VCC
- C4 pin1
- U1 VOUT
COMPONENT_PINS:
U2 (ESP-12E)
- pin1(RST, RESET): NETS(U2_RST)
- pin2(ADC): NOT_CONNECTED
- pin3(EN): NETS(U2_EN)
- pin4(IO16, GPIO16): NOT_CONNECTED
- pin5(IO14, GPIO14): NETS(R9_pos)
- pin6(IO12, GPIO12): NETS(HR_INT)
- pin7(IO13, GPIO13): NETS(MOTION_INT)
- pin8(VCC): NETS(V3V3)
- pin9(CS0): NOT_CONNECTED
- pin10(MISO): NOT_CONNECTED
- pin11(IO9, GPIO9): NOT_CONNECTED
- pin12(IO10, GPIO10): NOT_CONNECTED
- pin13(MOSI): NOT_CONNECTED
- pin14(SCLK): NOT_CONNECTED
- pin15(GND): NETS(GND)
- pin16(IO15, GPIO15): NETS(R4_pos)
- pin17(IO2, GPIO2): NETS(R5_pos)
- pin18(IO0, GPIO0): NETS(R14_pos)
- pin19(IO4, GPIO4): NETS(I2C_SDA)
- pin20(IO5, GPIO5): NETS(I2C_SCL)
- pin21(RXD): NETS(U2_RXD)
- pin22(TXD): NETS(U2_TXD)
J1 (B2B-PH-K-S(LF)(SN))
- pin1: NETS(VBAT)
- pin2: NETS(GND)
U1 (AP2112K_3_3TRG1)
- pin1(VIN): NETS(VBAT)
- pin2(GND): NETS(GND)
- pin3(EN): NETS(VBAT)
- pin4(NC): NOT_CONNECTED
- pin5(VOUT): NETS(V3V3)
C3 (1uF undefined)
- pin1: NETS(VBAT)
- pin2: NETS(GND)
C4 (1uF undefined)
- pin1: NETS(V3V3)
- pin2: NETS(GND)
R3 (10kΩ undefined)
- pin1(anode, pos, left): NETS(U2_EN)
- pin2(cathode, neg, right): NETS(V3V3)
R4 (10kΩ undefined)
- pin1(anode, pos, left): NETS(R4_pos)
- pin2(cathode, neg, right): NETS(GND)
R5 (10kΩ undefined)
- pin1(anode, pos, left): NETS(R5_pos)
- pin2(cathode, neg, right): NETS(V3V3)
R6 (10kΩ undefined)
- pin1(anode, pos, left): NETS(U2_RST)
- pin2(cathode, neg, right): NETS(V3V3)
SW_RST (SKSCPCE010)
- pin1(RESET): NETS(U2_RST)
- pin2(GND): NETS(GND)
- pin3(NC3): NOT_CONNECTED
- pin4(NC4): NOT_CONNECTED
- pin5(SHIELD): NOT_CONNECTED
SW_NAV (SKSCPCE010)
- pin1(GPIO0): NETS(R14_pos)
- pin2(GND): NETS(GND)
- pin3(NC3): NOT_CONNECTED
- pin4(NC4): NOT_CONNECTED
- pin5(SHIELD): NOT_CONNECTED
DS1 (HS91L02W2C01)
- pin1(GND): NETS(GND)
- pin2(VCC): NETS(V3V3)
- pin3(SCL): NETS(I2C_SCL)
- pin4(SDA): NETS(I2C_SDA)
U4 (MPU-6050)
- pin1(CLKIN): NETS(GND)
- pin2(NC1): NOT_CONNECTED
- pin3(NC2): NOT_CONNECTED
- pin4(NC3): NOT_CONNECTED
- pin5(NC4): NOT_CONNECTED
- pin6(AUX_DA): NOT_CONNECTED
- pin7(AUX_CL): NOT_CONNECTED
- pin8(VLOGIC): NETS(V3V3)
- pin9(AD0): NETS(GND)
- pin10(REGOUT): NETS(U4_REGOUT)
- pin11(FSYNC): NETS(GND)
- pin12(INT): NETS(MOTION_INT)
- pin13(VDD): NETS(V3V3)
- pin14(NC5): NOT_CONNECTED
- pin15(NC6): NOT_CONNECTED
- pin16(NC7): NOT_CONNECTED
- pin17(NC8): NOT_CONNECTED
- pin18(GND): NETS(GND)
- pin19(RESV1): NOT_CONNECTED
- pin20(CPOUT): NETS(U4_CPOUT)
- pin21(RESV2): NOT_CONNECTED
- pin22(RESV3): NOT_CONNECTED
- pin23(SCL): NETS(I2C_SCL)
- pin24(SDA): NETS(I2C_SDA)
U5 (MAX30102EFD+T)
- pin1: NOT_CONNECTED
- pin2(SCL): NETS(I2C_SCL)
- pin3(SDA): NETS(I2C_SDA)
- pin4(PGND): NETS(GND)
- pin5: NOT_CONNECTED
- pin6: NOT_CONNECTED
- pin7: NOT_CONNECTED
- pin8: NOT_CONNECTED
- pin9(VLED_POS1): NETS(V3V3)
- pin10(VLED_POS2): NETS(V3V3)
- pin11(VDD): NETS(V1V8)
- pin12(GND): NETS(GND)
- pin13(N_INT): NETS(HR_INT)
- pin14: NOT_CONNECTED
U6 (TLV70018DDCR)
- pin1(IN): NETS(V3V3)
- pin2(GND): NETS(GND)
- pin3(EN): NETS(V3V3)
- pin4(NC): NOT_CONNECTED
- pin5(OUT): NETS(V1V8)
M1 (LCM1027A2445F)
- pin1(_NEG): NETS(MOTOR_LOW)
- pin2(_POS): NETS(V3V3)
R14 (10kΩ undefined)
- pin1(anode, pos, left): NETS(R14_pos)
- pin2(cathode, neg, right): NETS(V3V3)
R15 (4.7kΩ undefined)
- pin1(anode, pos, left): NETS(I2C_SCL)
- pin2(cathode, neg, right): NETS(V3V3)
R16 (4.7kΩ undefined)
- pin1(anode, pos, left): NETS(I2C_SDA)
- pin2(cathode, neg, right): NETS(V3V3)
R17 (4.7kΩ undefined)
- pin1(anode, pos, left): NETS(HR_INT)
- pin2(cathode, neg, right): NETS(V3V3)
C10 (2.2nF undefined)
- pin1(pos): NETS(U4_CPOUT)
- pin2(neg): NETS(GND)
C11 (10nF undefined)
- pin1(pos): NETS(V3V3)
- pin2(neg): NETS(GND)
C15 (4.7uF undefined)
- pin1(pos): NETS(V1V8)
- pin2(neg): NETS(GND)
C8 (100nF undefined)
- pin1(pos): NETS(U4_REGOUT)
- pin2(neg): NETS(GND)
C9 (100nF undefined)
- pin1(pos): NETS(V3V3)
- pin2(neg): NETS(GND)
C13 (100nF undefined)
- pin1(pos): NETS(V3V3)
- pin2(neg): NETS(GND)
C16 (100nF undefined)
- pin1(pos): NETS(V1V8)
- pin2(neg): NETS(GND)
C12 (10uF undefined)
- pin1(pos): NETS(V3V3)
- pin2(neg): NETS(GND)
C14 (1uF undefined)
- pin1(pos): NETS(V3V3)
- pin2(neg): NETS(GND)
Q1 (AO3400A)
- pin1(G): NETS(Q1_G)
- pin2(S): NETS(GND)
- pin3(D): NETS(MOTOR_LOW)
R9 (100Ω undefined)
- pin1(anode, pos, left): NETS(R9_pos)
- pin2(cathode, neg, right): NETS(Q1_G)
R13 (100kΩ undefined)
- pin1(anode, pos, left): NETS(Q1_G)
- pin2(cathode, neg, right): NETS(GND)
D2 (1N5819WS)
- pin1(CATHODE): NETS(V3V3)
- pin2(ANODE): NETS(MOTOR_LOW)
J2 (PZ200V-11-06P)
- pin1(NC1): NOT_CONNECTED
- pin2(ESP_TX): NETS(U2_TXD)
- pin3(ESP_RX): NETS(U2_RXD)
- pin4(VCC_3V3): NETS(V3V3)
- pin5(NC2): NOT_CONNECTED
- pin6(GND): NETS(GND)
C6 (100nF undefined)
- pin1: NETS(V3V3)
- pin2: NETS(GND)
C7 (10uF undefined)
- pin1: NETS(V3V3)
- pin2: NETS(GND)
Related Packages
More from this authorimrishabh18/boost-converterThis code defines a PCB schematic and 3D model layout focusing on a power conversion circuit with components like USB-C connector, MT3608 step-up regulator, inductor, diode, input/output capacitors, and resistors arranged on a double-layer PCB.
Similar packagehrithik18k/smart-switch-pcbThe AO3400A component models a SOT-23 N-channel MOSFET with labeled pins for Gate, Source, and Drain, including 3D CAD models and schematic symbols for electronic circuit design.
Discover something newShiboSoftwareDev/mspm0g3507-usb-c-dev-boardThe circuit assembles a USB-C port with integrated ESD protection, power regulation, UART interface, and microcontroller (MSPM0G3507) with supporting components for USB data lines, CC termination, I2C, SPI, reset circuitry, and indicator LEDs.