hrithik18k/rc-car-esc-xiao-20261025

A Seeed XIAO ESP32-C3 carrier board interfaces 3.3V PWM outputs to an ESC and steering servo, with 220Ω series/100kΩ pulldown resistors, SS14 5V BEC/USB isolation, and power filtering capacitors.

Version: 1.0.1
License: unset
Stars: 0

evidence/placement.log

$ tsci check placement
Detected entrypoint: 'index.circuit.tsx'
placement summary: no placement issues

board top-layer utilization:
- occupied: 19.492% (526.284mm^2 of 2700mm^2)
- empty spaces over 5% of board area:
  - 17.222% (465mm^2); bounds=(minX=-30mm, maxX=30mm, minY=-22.5mm, maxY=-14.75mm)
  - 11.463% (309.488mm^2); bounds=(minX=-3.85mm, maxX=5.32mm, minY=-11.25mm, maxY=22.5mm)
  - 6.34% (171.171mm^2); bounds=(minX=8.68mm, maxX=20.23mm, minY=7.68mm, maxY=22.5mm)

board-edge status:
- U1: 7.118mm inside top edge
- J1: 7.25mm inside right edge
- J2: 7.25mm inside right edge
- R1: 11.8mm inside top edge
- R2: 15.8mm inside bottom edge
- R3: 14.3mm inside right edge
- R4: 11.075mm inside bottom edge
- D1: 8.6mm inside bottom edge
- C1: 5.75mm inside right edge
- C2: 17.575mm inside right edge
- C3: 9.8mm inside bottom edge

placement drc:
Errors: 0
Warnings: 0