hrithik18k/rc-car-esc-xiao-20261025

A Seeed XIAO ESP32-C3 carrier board interfaces 3.3V PWM outputs to an ESC and steering servo, with 220Ω series/100kΩ pulldown resistors, SS14 5V BEC/USB isolation, and power filtering capacitors.

Version: 1.0.1
License: unset
Stars: 0

evidence/netlist.log

$ tsci check netlist
Detected entrypoint: 'index.circuit.tsx'
Errors: 0
Warnings: 0

Readable Netlist:
COMPONENTS:
 - U1: Seeed XIAO ESP32C3
 - J1: J1, source_component
 - J2: J2, source_component
 - R1: 220Ω resistor
 - R2: 220Ω resistor
 - R3: 100kΩ resistor
 - R4: 100kΩ resistor
 - D1: D1, source_component
 - C1: 100uF capacitor
 - C2: 100nF capacitor
 - C3: 10uF capacitor

NET: GND
  - R4 pin2
  - R3 pin2
  - C3 pin2 (-)
  - C2 pin2 (-)
  - C1 pin2 (-)
  - J2 GND
  - J1 GND
  - U1 GND

NET: BEC5V
  - C2 pin1 (+)
  - C1 pin1 (+)
  - D1 pin1 (+)
  - J2 BEC5V
  - J1 BEC5V

NET: MCU5V
  - C3 pin1 (+)
  - U1 V5
  - D1 pin2 (-)

NET: ESC_GPIO
  - R1 pin1
  - U1 D1

NET: SERVO_GPIO
  - R2 pin1
  - U1 D2

NET: ESC_PWM
  - J1 ESC
  - R3 pin1
  - R1 pin2

NET: SERVO_PWM
  - J2 SERVO
  - R4 pin1
  - R2 pin2


COMPONENT_PINS:
U1 (Seeed XIAO ESP32C3)
- pin1(D0): NOT_CONNECTED
- pin2(D1): NETS(ESC_GPIO)
- pin3(D2): NETS(SERVO_GPIO)
- pin4(D3): NOT_CONNECTED
- pin5(D4): NOT_CONNECTED
- pin6(D5): NOT_CONNECTED
- pin7(D6): NOT_CONNECTED
- pin8(D7): NOT_CONNECTED
- pin9(D8): NOT_CONNECTED
- pin10(D9): NOT_CONNECTED
- pin11(D10): NOT_CONNECTED
- pin12(V3V3): NOT_CONNECTED
- pin13(GND): NETS(GND)
- pin14(V5): NETS(MCU5V)

J1
- pin1(GND): NETS(GND)
- pin2(BEC5V): NETS(BEC5V)
- pin3(ESC): NETS(ESC_PWM)

J2
- pin1(GND): NETS(GND)
- pin2(BEC5V): NETS(BEC5V)
- pin3(SERVO): NETS(SERVO_PWM)

R1 (220Ω undefined)
- pin1(anode, pos, left): NETS(ESC_GPIO)
- pin2(cathode, neg, right): NETS(ESC_PWM)

R2 (220Ω undefined)
- pin1(anode, pos, left): NETS(SERVO_GPIO)
- pin2(cathode, neg, right): NETS(SERVO_PWM)

R3 (100kΩ undefined)
- pin1(anode, pos, left): NETS(ESC_PWM)
- pin2(cathode, neg, right): NETS(GND)

R4 (100kΩ undefined)
- pin1(anode, pos, left): NETS(SERVO_PWM)
- pin2(cathode, neg, right): NETS(GND)

D1 (SS14)
- pin1(pos, anode, left): NETS(BEC5V)
- pin2(neg, cathode, right): NETS(MCU5V)

C1 (100uF undefined)
- pin1(anode, pos): NETS(BEC5V)
- pin2(cathode, neg): NETS(GND)

C2 (100nF undefined)
- pin1(anode, pos, left): NETS(BEC5V)
- pin2(cathode, neg, right): NETS(GND)

C3 (10uF undefined)
- pin1(anode, pos, left): NETS(MCU5V)
- pin2(cathode, neg, right): NETS(GND)