hrithik18k/open-ring-flex

A flexible wearable PCB integrating inductive battery charging, BLE control with SPI flash and 32 MHz crystal, SAM L10 capacitive touch/wear sensing, haptic MOSFET drive with a large capacitor bank, RF antenna matching, and SWD programming/test connectors.

Version
1.0.4
License
CC-BY-NC-SA-4.0
Stars
0

imports/W3008.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["Feed2","GND2"],
  pin2: ["GND1","Feed1"]
} as const

export const W3008 = (props: ChipProps) => {
  return (
    <chip
      pinLabels={pinLabels}
      supplierPartNumbers={{
  "jlcpcb": [
    "C581402"
  ]
}}
      manufacturerPartNumber="W3008"
      footprint={<footprint>
        <smtpad portHints={["pin2"]} pcbX="1.478026mm" pcbY="0mm" width="1.1999976mm" height="1.7500092mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-1.478026mm" pcbY="0mm" width="1.1999976mm" height="1.7500092mm" shape="rect" />
<silkscreenpath route={[{"x":-1.6759936000000835,"y":1.059967400000005},{"x":1.675993599999856,"y":1.0499852000000374}]} />
<silkscreenpath route={[{"x":1.5239999999998872,"y":-1.0500105999999505},{"x":-1.6759428000000298,"y":-1.0499852000000374}]} />
<silkscreentext text="{NAME}" pcbX="0mm" pcbY="2.0668mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.328024800000094,"y":1.1250046000000111},{"x":2.32802479999998,"y":1.1250046000000111},{"x":2.32802479999998,"y":-1.1250046000000111},{"x":-2.328024800000094,"y":-1.1250046000000111},{"x":-2.328024800000094,"y":1.1250046000000111}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C581402.obj?uuid=820a50523fdd462ea73668072697c441",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C581402.step?uuid=820a50523fdd462ea73668072697c441",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: 0, z: -0.02 },
      }}
      {...props}
    />
  )
}