hrithik18k/open-ring-flex

A flexible wearable PCB integrating inductive battery charging, BLE control with SPI flash and 32 MHz crystal, SAM L10 capacitive touch/wear sensing, haptic MOSFET drive with a large capacitor bank, RF antenna matching, and SWD programming/test connectors.

Version
1.0.4
License
CC-BY-NC-SA-4.0
Stars
0

imports/NTCG104ED104DT1X.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["pin1"],
  pin2: ["pin2"]
} as const

export const NTCG104ED104DT1X = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      symbol={
        <symbol>
          <schematicrect schX={0.01} schY={0} width={0.62} height={0.2} strokeWidth={0.02} color="#880000" />
          <schematicpath points={[{"x":0.32,"y":0},{"x":0.4,"y":0}]} strokeColor="#880000" />
          <schematicpath points={[{"x":-0.3,"y":0},{"x":-0.4,"y":0}]} strokeColor="#880000" />
          <schematicpath points={[{"x":-0.28,"y":-0.2},{"x":-0.1,"y":-0.2},{"x":0.26,"y":0.16}]} strokeColor="#880000" />
          <port name="pin1" pinNumber={1} aliases={["1"]} direction="left" schX={-0.8} schY={0} schStemLength={0.4} />
          <port name="pin2" pinNumber={2} aliases={["2"]} direction="right" schX={0.8} schY={0} schStemLength={0.4} />
          <schematictext schX={0} schY={0.4} text="{NAME}" fontSize={0.2} anchor="bottom_center" />
        </symbol>
      }
      supplierPartNumbers={{
  "jlcpcb": [
    "C3152998"
  ]
}}
      manufacturerPartNumber="NTCG104ED104DT1X"
      footprint={<footprint>
        <smtpad portHints={["pin2"]} pcbX="0.432816mm" pcbY="0mm" width="0.565658mm" height="0.540004mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.432816mm" pcbY="0mm" width="0.565658mm" height="0.540004mm" shape="rect" />
<silkscreenpath route={[{"x":-0.22621240000012222,"y":-0.4986020000000053},{"x":-0.9442450000001372,"y":-0.4986020000000053},{"x":-0.9442450000001372,"y":0.498602000000119},{"x":-0.22621240000012222,"y":0.498602000000119}]} />
<silkscreenpath route={[{"x":0.22621240000000853,"y":-0.4986020000000053},{"x":0.9442449999999099,"y":-0.4986020000000053},{"x":0.9442449999999099,"y":0.498602000000119},{"x":0.22621240000000853,"y":0.498602000000119}]} />
<silkscreentext text="{NAME}" pcbX="0mm" pcbY="1.508mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-0.9656450000001087,"y":0.5200019999999768},{"x":0.965644999999995,"y":0.5200019999999768},{"x":0.965644999999995,"y":-0.5200019999999768},{"x":-0.9656450000001087,"y":-0.5200019999999768},{"x":-0.9656450000001087,"y":0.5200019999999768}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C3152998.obj?uuid=026a4a15ab5c4a92ac0e421d6d013717",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C3152998.step?uuid=026a4a15ab5c4a92ac0e421d6d013717",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: -0.000012700000070253736, z: 0 },
      }}
      {...props}
    />
  )
}