hrithik18k/open-ring-flex

A flexible wearable PCB integrating inductive battery charging, BLE control with SPI flash and 32 MHz crystal, SAM L10 capacitive touch/wear sensing, haptic MOSFET drive with a large capacitor bank, RF antenna matching, and SWD programming/test connectors.

Version
1.0.4
License
CC-BY-NC-SA-4.0
Stars
0

imports/MX25R4035FZUIL0.tsx

import type { ChipProps } from "@tscircuit/props"

const pinLabels = {
  pin1: ["N_CS"],
  pin2: ["SO","SIO1"],
  pin3: ["N_WP","SIO2"],
  pin4: ["GND"],
  pin5: ["SI","SIO0"],
  pin6: ["SCLK"],
  pin7: ["N_RESET","N_SIO3_or_HOLD","SIO3"],
  pin8: ["VCC"],
  pin9: ["EP"]
} as const

const pinAttributes = {
  pin4: {requiresGround: true},
  pin8: {requiresPower: true}
} as const

export const MX25R4035FZUIL0 = (props: ChipProps<typeof pinLabels>) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C7009757"
  ]
}}
      manufacturerPartNumber="MX25R4035FZUIL0"
      footprint={<footprint>
        <smtpad portHints={["pin9"]} pcbX="-0.000254mm" pcbY="-0.000381mm" width="1.5999968mm" height="0.1999996mm" shape="rect" />
<smtpad portHints={["pin8"]} pcbX="-0.750062mm" pcbY="1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin7"]} pcbX="-0.249682mm" pcbY="1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin6"]} pcbX="0.25019mm" pcbY="1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin5"]} pcbX="0.750062mm" pcbY="1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin4"]} pcbX="0.750062mm" pcbY="-1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="0.25019mm" pcbY="-1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="-0.249682mm" pcbY="-1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<smtpad portHints={["pin1"]} pcbX="-0.750062mm" pcbY="-1.250061mm" width="0.2999994mm" height="0.499999mm" shape="rect" />
<silkscreenpath route={[{"x":-1.1292585999998437,"y":1.5240507999999409},{"x":-1.1430253999999422,"y":1.5240507999999409}]} />
<silkscreenpath route={[{"x":1.129080799999997,"y":-1.523949200000061},{"x":1.1429746000000023,"y":-1.523949200000061},{"x":1.1429746000000023,"y":1.5240507999999409},{"x":1.129080799999997,"y":1.5240507999999409}]} />
<silkscreenpath route={[{"x":-1.1430253999999422,"y":1.5240507999999409},{"x":-1.1430253999999422,"y":-1.523949200000061},{"x":-1.1292585999998437,"y":-1.523949200000061}]} />
<silkscreencircle pcbX="-1.143mm" pcbY="-1.778127mm" radius="0.056896mm" />
<silkscreentext text="{NAME}" pcbX="-0.025654mm" pcbY="2.523619mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.2549763999999186,"y":1.7599791999999752},{"x":1.2550017999999454,"y":1.7599791999999752},{"x":1.2550017999999454,"y":-1.760004600000002},{"x":-1.2549763999999186,"y":-1.760004600000002},{"x":-1.2549763999999186,"y":1.7599791999999752}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7009757.obj?uuid=7fe7f33cd1184f14a653e4bf40700294",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C7009757.step?uuid=7fe7f33cd1184f14a653e4bf40700294",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0.0049873000000434375, y: 0.000012700000070253736, z: -0.035 },
      }}
      {...props}
    />
  )
}