hrithik18k/open-ring-flex

A flexible wearable PCB integrating inductive battery charging, BLE control with SPI flash and 32 MHz crystal, SAM L10 capacitive touch/wear sensing, haptic MOSFET drive with a large capacitor bank, RF antenna matching, and SWD programming/test connectors.

Version
1.0.4
License
CC-BY-NC-SA-4.0
Stars
0

imports/MLZ1608N2R2LT000.tsx

import type { InductorProps } from "@tscircuit/props"

export const MLZ1608N2R2LT000 = (props: Omit<InductorProps, "inductance">) => {
  return (
    <inductor
      inductance="2.2uH"
      symbol={
        <symbol>
          <port name="pin2" pinNumber={2} aliases={["2"]} direction="right" schX={0.4} schY={0} schStemLength={0.08} />
          <port name="pin1" pinNumber={1} aliases={["1"]} direction="left" schX={-0.4} schY={0} schStemLength={0.08} />
          <schematicpath svgPath="M -0.32 0.0004 A 0.08 0.08 0 1 0 -0.16 -0.0004" strokeColor="#880000" />
          <schematicpath svgPath="M -0.16 0.0004 A 0.08 0.08 0 1 0 0 -0.0004" strokeColor="#880000" />
          <schematicpath svgPath="M 0.16 0.0004 A 0.08 0.08 0 1 0 0.32 -0.0004" strokeColor="#880000" />
          <schematicpath svgPath="M 0 0.0004 A 0.08 0.08 0 1 0 0.16 -0.0004" strokeColor="#880000" />
          <schematictext schX={0} schY={0.28} text="{NAME}" fontSize={0.2} anchor="bottom_center" />
        </symbol>
      }
      supplierPartNumbers={{
  "jlcpcb": [
    "C531282"
  ]
}}
      manufacturerPartNumber="MLZ1608N2R2LT000"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.699897mm" pcbY="0mm" width="0.7999984mm" height="0.8640064mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0.699897mm" pcbY="0mm" width="0.7999984mm" height="0.8640064mm" shape="rect" />
<silkscreenpath route={[{"x":-1.2700000000000955,"y":-0.6513575999998693},{"x":-1.4241018000001304,"y":-0.499008399999866},{"x":-1.4241018000001304,"y":0.5174234000000979},{"x":-1.2700000000000955,"y":0.6499860000001263}]} />
<silkscreenpath route={[{"x":1.2699999999998681,"y":0.6499860000001263},{"x":1.4241525999999567,"y":0.49898300000006657},{"x":1.4241525999999567,"y":-0.5174487999998973},{"x":1.2699999999998681,"y":-0.6500114000000394}]} />
<silkscreenpath route={[{"x":-1.272006600000168,"y":0.6499860000001263},{"x":-0.5100066000001107,"y":0.6499860000001263}]} />
<silkscreenpath route={[{"x":1.2720573999999942,"y":-0.6500114000000394},{"x":0.5100573999999369,"y":-0.6500114000000394}]} />
<silkscreenpath route={[{"x":-1.272006600000168,"y":-0.6500114000000394},{"x":-0.5100066000001107,"y":-0.6500114000000394}]} />
<silkscreenpath route={[{"x":1.2720573999999942,"y":0.6499860000001263},{"x":0.5100573999999369,"y":0.6499860000001263}]} />
<silkscreentext text="{NAME}" pcbX="0.009525mm" pcbY="1.63754mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-1.349896200000103,"y":0.6820032000000538},{"x":1.3498961999999892,"y":0.6820032000000538},{"x":1.3498961999999892,"y":-0.6820032000000538},{"x":-1.349896200000103,"y":-0.6820032000000538},{"x":-1.349896200000103,"y":0.6820032000000538}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C531282.obj?uuid=a7f84688c5004aa68dbcbddc99bd5473",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C531282.step?uuid=a7f84688c5004aa68dbcbddc99bd5473",
        pcbRotationOffset: 180,
        modelOriginPosition: { x: 0.0023875999999063424, y: 0.015976600000044527, z: -0.25 },
      }}
      {...props}
    />
  )
}