hrithik18k/open-ring-flex

A flexible wearable PCB integrating inductive battery charging, BLE control with SPI flash and 32 MHz crystal, SAM L10 capacitive touch/wear sensing, haptic MOSFET drive with a large capacitor bank, RF antenna matching, and SWD programming/test connectors.

Version
1.0.4
License
CC-BY-NC-SA-4.0
Stars
0

imports/LQP03TN3N3B02D.tsx

import type { InductorProps } from "@tscircuit/props"

export const LQP03TN3N3B02D = (props: Omit<InductorProps, "inductance">) => {
  return (
    <inductor
      inductance="3.3nH"
      symbol={
        <symbol>
          <port name="pin2" pinNumber={2} aliases={["2"]} direction="right" schX={0.4} schY={0} schStemLength={0.06} />
          <port name="pin1" pinNumber={1} aliases={["1"]} direction="left" schX={-0.4} schY={0} schStemLength={0.06} />
          <schematicpath svgPath="M -0.33766 0.00136 A 0.08 0.078 0 1 0 -0.17836 0.00128" strokeColor="#880000" />
          <schematicpath svgPath="M -0.168 0.00142 A 0.08 0.078 0 1 0 -0.0087 0.00132" strokeColor="#880000" />
          <schematicpath svgPath="M 0.00134 0.00142 A 0.08 0.078 0 1 0 0.16064 0.00132" strokeColor="#880000" />
          <schematicpath svgPath="M 0.174 0.00138 A 0.08 0.078 0 1 0 0.3333 0.00128" strokeColor="#880000" />
          <schematictext schX={0} schY={0.286} text="{NAME}" fontSize={0.2} anchor="bottom_center" />
        </symbol>
      }
      supplierPartNumbers={{
  "jlcpcb": [
    "C98045"
  ]
}}
      manufacturerPartNumber="LQP03TN3N3B02D"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="-0.27432mm" pcbY="0mm" width="0.368427mm" height="0.3240024mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="0.27432mm" pcbY="0mm" width="0.368427mm" height="0.3240024mm" shape="rect" />
<silkscreenpath route={[{"x":-0.8889999999998963,"y":-0.2743199999998751},{"x":-0.8889999999998963,"y":0.2743199999999888}]} />
<silkscreenpath route={[{"x":0.16619220000006862,"y":-0.39060120000010556},{"x":0.5346446000000924,"y":-0.39060120000010556},{"x":0.6870446000000356,"y":-0.23820119999993494},{"x":0.6870446000000356,"y":0.23820120000004863},{"x":0.5346446000000924,"y":0.3906011999999919},{"x":0.16619220000006862,"y":0.3906011999999919}]} />
<silkscreenpath route={[{"x":-0.16619219999995494,"y":-0.39060120000010556},{"x":-0.534644599999865,"y":-0.39060120000010556},{"x":-0.687044599999922,"y":-0.23820119999993494},{"x":-0.687044599999922,"y":0.23820120000004863},{"x":-0.534644599999865,"y":0.3906011999999919},{"x":-0.16619219999995494,"y":0.3906011999999919}]} />
<silkscreentext text="{NAME}" pcbX="-0.09652mm" pcbY="1.381mm" anchorAlignment="center" fontSize="1mm" />
<fabricationnotepath route={[{"x":-0.5079999999998108,"y":-0.1270000000000664},{"x":-0.3809999999998581,"y":-0.1270000000000664},{"x":-0.3809999999998581,"y":0.1269999999999527},{"x":-0.5079999999998108,"y":0.1269999999999527},{"x":-0.5079999999998108,"y":-0.1270000000000664}]} strokeWidth="0mm" isFilled hasStroke={false} />
<courtyardoutline outline={[{"x":-0.7085335000000441,"y":0.4120011999999633},{"x":0.7085335000000441,"y":0.4120011999999633},{"x":0.7085335000000441,"y":-0.4120011999999633},{"x":-0.7085335000000441,"y":-0.4120011999999633},{"x":-0.7085335000000441,"y":0.4120011999999633}]} />
      </footprint>}
      cadModel={{
        objUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C98045.obj?uuid=fa57e36e003e4ee2b14b14feaebd32e1",
        stepUrl: "https://modelcdn.tscircuit.com/easyeda_models/assets/C98045.step?uuid=fa57e36e003e4ee2b14b14feaebd32e1",
        pcbRotationOffset: 0,
        modelOriginPosition: { x: 0, y: -0.000012699999956566899, z: -0.01 },
      }}
      {...props}
    />
  )
}