hrithik18k/open-ring-flex

docs/validation-logs/build.log

Building 1 file(s)...
Building index.circuit.tsx...
Generating circuit JSON...
trace: `key` is not a prop. Trying to access it will result in `undefined` being returned. If you need to access the same value within the child component, you should pass it as a different prop. (https://react.dev/link/special-props)
Saved autorouting paths to .tscircuit\autorouting-artifacts\index-circuit-tsx-2e2764dae4\subcircuit_source_group_0-phase-0-order-0-stage-0.pcb-trace-paths.json (import this JSON into <autoroutingphase pcbTracePaths={...} />).
Saved autorouting paths to .tscircuit\autorouting-artifacts\index-circuit-tsx-2e2764dae4\subcircuit_source_group_0-phase-1-order-1-stage-0.pcb-trace-paths.json (import this JSON into <autoroutingphase pcbTracePaths={...} />).
Circuit JSON written to dist\index\circuit.json
The "Y" prefix is being used with a <chip />, try using it with a <crystal />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Component PAD5 has ftype="simple_test_point" but reference designator should start with TP
Component PAD6 has ftype="simple_test_point" but reference designator should start with TP
Component PAD3 has ftype="simple_test_point" but reference designator should start with TP
Component PAD4 has ftype="simple_test_point" but reference designator should start with TP
Component PAD1 has ftype="simple_test_point" but reference designator should start with TP
Component PAD2 has ftype="simple_test_point" but reference designator should start with TP
U2 has no pin with requires_power=true
Y1 has no pin with requires_power=true
Y1 has no pin with requires_ground=true
All pins on Y1 are underspecified (no pinAttributes set)
U1 has no pin with requires_power=true
U1 has no pin with requires_ground=true
All pins on U1 are underspecified (no pinAttributes set)
Q1 has no pin with requires_power=true
Q1 has no pin with requires_ground=true
All pins on Q1 are underspecified (no pinAttributes set)
NTC1 has no pin with requires_power=true
NTC1 has no pin with requires_ground=true
All pins on NTC1 are underspecified (no pinAttributes set)
D4 has no pin with requires_power=true
D4 has no pin with requires_ground=true
All pins on D4 are underspecified (no pinAttributes set)
D1 has no pin with requires_power=true
D1 has no pin with requires_ground=true
All pins on D1 are underspecified (no pinAttributes set)
D2 has no pin with requires_power=true
D2 has no pin with requires_ground=true
All pins on D2 are underspecified (no pinAttributes set)
U4 has no pin with requires_power=true
J1 has no pin with requires_power=true
J1 has no pin with requires_ground=true
All pins on J1 are underspecified (no pinAttributes set)
J2 has no pin with requires_power=true
J2 has no pin with requires_ground=true
All pins on J2 are underspecified (no pinAttributes set)
All pins on E1 are underspecified (no pinAttributes set)
All pins on E2 are underspecified (no pinAttributes set)
All pins on E3 are underspecified (no pinAttributes set)
All pins on E4 are underspecified (no pinAttributes set)
All pins on E5 are underspecified (no pinAttributes set)
All pins on E6 are underspecified (no pinAttributes set)
Y1 has no courtyard
E1 has no courtyard
E2 has no courtyard
E3 has no courtyard
E4 has no courtyard
E5 has no courtyard
E6 has no courtyard
Generating preview images...
[index] Generating PCB PNG...
[index] Written pcb.png
[index] Generating schematic SVG...
[index] Written schematic.svg
[index] Generating schematic PNG...
[index] Written schematic.png

Build complete
  Circuits  1 passed
  Options   pcb-png, schematic-png, schematic-svgs
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully