gokul/musegrow
USB‑C powered ESP32‑C3 controller board with regulated 3.3 V supply, USB ESD protection, buttons/status LEDs, ambient-light I²C sensing, and a 555-driven capacitive soil-moisture electrode.
- Version
- 1.2.2
- License
- unset
- Stars
- 1
fabrication/README.md
# MuseGrow V1 manufacturing bundle
- `musegrow-v1-gerbers.zip`: copper, solder mask, paste, silkscreen, fabrication, board outline, drill files, generated BOM, and pick-and-place data
- `musegrow-v1-kicad.zip`: editable KiCad project
- `musegrow-v1-assembly.svg`: assembly drawing
- `musegrow-v1-bom.csv`: reviewed grouped BOM
- `musegrow-v1-bom-generated.csv`: BOM generated by tscircuit
- `musegrow-v1-pick-and-place.csv`: tscircuit pick-and-place export
- `musegrow-v1-netlist.txt`: readable electrical netlist
Review the pick-and-place orientation of D1, LED1, and LED2 with the assembly vendor. Their exact JLCPCB footprints and polarity mappings are correct in the circuit source, but the current exporter does not emit supplier pin-1 metadata for those three polarized two-pin parts.
Related Packages
More from this authorgokul/board-v2This design integrates an ESP32-S3 Wi-Fi and Bluetooth module, a USB-C port with power and data circuitry, a USB ESD protection chip, a 3.3V voltage regulator, and an OLED display module on a PCB with associated routing and thermal copper pour layers.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.