gokul/lora-device
A compact LoRa/GNSS device PCB integrating an SX1262 radio, GNSS module, USB/UART interface, 1.5 µH inductor, LiPo battery connector with NTC, and supporting passives.
- Version
- 0.1.6
- License
- unset
- Stars
- 0
Files in (root)/dist/gerber-review
- B_Cu.gbr.png
- B_Cu.gbr.svg
- B_Mask.gbr.png
- B_Mask.gbr.svg
- B_Paste.gbr.png
- B_Paste.gbr.svg
- B_SilkScreen.gbr.png
- B_SilkScreen.gbr.svg
- drill_npth.drl.png
- drill_npth.drl.svg
- drill-L1-L4.drl.png
- drill-L1-L4.drl.svg
- Edge_Cuts.gbr.png
- Edge_Cuts.gbr.svg
- F_Cu.gbr.png
- F_Cu.gbr.svg
- F_Mask.gbr.png
- F_Mask.gbr.svg
- F_Paste.gbr.png
- F_Paste.gbr.svg
- F_SilkScreen.gbr.png
- F_SilkScreen.gbr.svg
- In1_Cu.gbr.png
- In1_Cu.gbr.svg
- In2_Cu.gbr.png
- In2_Cu.gbr.svg
Related Packages
More from this authorgokul/acoustic-guitar-tunerThis code defines the physical pin configuration and footprint layouts for the ATtiny1616 microcontroller and a matching tactile switch component, including their key hardware connection points, dimensions, and 3D models.
Similar packagecodezonly/pt1This design implements a compact embedded hardware module combining a Seeed XIAO ESP32-C6 microcontroller, a RushFPV GNSS Mini M10 GPS module, and an SX1262 LoRa transceiver, integrated with USB-C power/data, user interface LEDs and buttons, decoupling capacitors, and antenna connectors for GPS and LoRa communication.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.