gokul/lora-device

A compact LoRa/GNSS device PCB integrating an SX1262 radio, GNSS module, USB/UART interface, 1.5 µH inductor, LiPo battery connector with NTC, and supporting passives.

Version
0.1.6
License
unset
Stars
0

validation/logs/jlcpcb-full-build.log

Building 1 file(s)...
Building index.circuit.tsx...
Generating circuit JSON...
Could not save autorouting paths for subcircuit_source_group_2: [
  {
    "code": "custom",
    "message": "A fanout trace path must use vias for layer changes",
    "path": [
      "route"
    ]
  }
]
Circuit JSON written to dist/index/circuit.json
No <schematicsheet> was found. Add a <schematicsheet> to define the schematic drawing area.
Trace [.U6 > .pin6 to .R12 > .pin2] is routed thinner than requested (requested: 0.24mm, actual: 0.2mm).
Trace [.U6 > .pin4 to .R11 > .pin2] is routed thinner than requested (requested: 0.24mm, actual: 0.2mm).
U6 may not have availability from jlcpcb (C7519).

Build complete
  Circuits  1 passed
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully