gokul/lora-device
A compact LoRa/GNSS device PCB integrating an SX1262 radio, GNSS module, USB/UART interface, 1.5 µH inductor, LiPo battery connector with NTC, and supporting passives.
- Version
- 0.1.6
- License
- unset
- Stars
- 0
docs/attribution.md
# Footprint and model attribution
Battery connector, UART-buffer and GNSS footprints were converted from the KiCad footprint library and checked against the selected component drawings. The JST battery connector and VSSOP-8 3D assets were converted from KiCad STEP models to JSCAD geometry. KiCad library contributors provide these under [CC BY-SA 4.0 with the KiCad design exception](https://www.kicad.org/libraries/license/).
Source library items:
- Connector_JST / JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical
- Package_SO / VSSOP-8_2.3x2mm_P0.5mm
- RF_GPS / u-blox_SAM-M8Q (pin-compatible land pattern, checked against SAM-M10Q drawings)
The GNSS model remains a nominal envelope created for this board. The radio and inductor models have been replaced by manufacturer-published geometry, as has the ESP32 model and every resistor model. See `manufacturer-models.md` for exact sources, transformations and outstanding parts. Unreplaced imported models retain their previous library provenance. The radio model includes its onboard IPEX connector; the attached cable and external battery are not modeled.
Related Packages
More from this authorgokul/acoustic-guitar-tunerThis code defines the physical pin configuration and footprint layouts for the ATtiny1616 microcontroller and a matching tactile switch component, including their key hardware connection points, dimensions, and 3D models.
Similar packagecodezonly/pt1This design implements a compact embedded hardware module combining a Seeed XIAO ESP32-C6 microcontroller, a RushFPV GNSS Mini M10 GPS module, and an SX1262 LoRa transceiver, integrated with USB-C power/data, user interface LEDs and buttons, decoupling capacitors, and antenna connectors for GPS and LoRa communication.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.