aura/diy-power-delivery-trigger
This hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
- Version
- 0.0.1
- License
- unset
- Stars
- 0
index.tsx
PCB
Schematic
const UsbCPlug = (props: any) => (
<connector
{...props}
supplierPartNumbers={{ jlcpcb: ["C165948"] }}
footprint="kicad:Connector_USB/USB_C_Receptacle_HRO_TYPE-C-31-M-12"
/>
)
const Fusb302 = (props: any) => (
<chip
{...props}
footprint="kicad:Package_DFN_QFN/WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm"
supplierPartNumbers={{ jlcpcb: ["C132291"] }}
pinLabels={{
pin1: "CC2_B",
pin2: "VBUS",
pin3: "VDD_A",
pin4: "VDD_B",
pin5: "INT_N",
pin6: "SCL",
pin7: "SDA",
pin8: "GND_A",
pin9: "GND_B",
pin10: "CC1_B",
pin11: "CC1_A",
pin12: "VCONN_B",
pin13: "VCONN_A",
pin14: "CC2_A",
pin15: "EP",
}}
pinAttributes={{
VBUS: { requiresPower: true },
VDD_A: { requiresPower: true },
VDD_B: { requiresPower: true },
GND_A: { requiresPower: true, requiresGround: true },
GND_B: { requiresPower: true, requiresGround: true },
EP: { requiresPower: true, requiresGround: true },
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: [
"CC2_A",
"VCONN_A",
"VCONN_B",
"CC1_A",
"CC1_B",
"GND_A",
"GND_B",
],
},
rightSide: {
direction: "top-to-bottom",
pins: ["CC2_B", "VBUS", "VDD_A", "VDD_B", "INT_N", "SCL", "SDA"],
},
bottomSide: {
direction: "left-to-right",
pins: ["EP"],
},
}}
/>
)
const Stm32F030 = (props: any) => (
<chip
{...props}
footprint="kicad:Package_SO/TSSOP-20_4.4x6.5mm_P0.65mm"
supplierPartNumbers={{ jlcpcb: ["C89040"] }}
pinLabels={{
pin1: "BOOT0",
pin2: "PF0_OSC_IN",
pin3: "PF1_OSC_OUT",
pin4: "NRST",
pin5: "VDDA",
pin6: "PA0",
pin7: "PA1",
pin8: "PA2_TX",
pin9: "PA3_RX",
pin10: "PA4",
pin11: "PA5_LED_R",
pin12: "PA6_LED_G",
pin13: "PA7_LED_B",
pin14: "PB1_INT",
pin15: "VSS",
pin16: "VDD",
pin17: "PA9_SCL",
pin18: "PA10_SDA",
pin19: "PA13_SWDIO",
pin20: "PA14_SWCLK",
}}
pinAttributes={{
VDDA: { requiresPower: true },
VDD: { requiresPower: true },
VSS: { requiresPower: true, requiresGround: true },
BOOT0: { mustBeConnected: true },
NRST: { mustBeConnected: true },
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: [
"PA0",
"PA1",
"PA2_TX",
"PA3_RX",
"PA4",
"PA5_LED_R",
"PA6_LED_G",
"PA7_LED_B",
],
},
rightSide: {
direction: "top-to-bottom",
pins: ["PB1_INT", "PF0_OSC_IN", "PF1_OSC_OUT", "BOOT0", "NRST", "VSS"],
},
bottomSide: {
direction: "left-to-right",
pins: [
"VDDA",
"VDD",
"PA9_SCL",
"PA10_SDA",
"PA13_SWDIO",
"PA14_SWCLK",
],
},
}}
/>
)
const Buck3V3 = (props: any) => (
<chip
{...props}
footprint="kicad:Package_TO_SOT_SMD/SOT-23-6"
supplierPartNumbers={{ jlcpcb: ["C780769"] }}
pinLabels={{
pin1: "SW",
pin2: "GND",
pin3: "FB",
pin4: "EN",
pin5: "VIN",
pin6: "BST",
}}
pinAttributes={{
VIN: { requiresPower: true },
GND: { requiresPower: true, requiresGround: true },
SW: { mustBeConnected: true },
FB: { mustBeConnected: true },
EN: { mustBeConnected: true },
BST: { mustBeConnected: true },
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["VIN", "EN", "FB"],
},
rightSide: {
direction: "top-to-bottom",
pins: ["BST", "SW", "GND"],
},
}}
/>
)
const EsdDiode = (props: any) => (
<diode
{...props}
footprint="kicad:Diode_SMD/D_SOD-323"
supplierPartNumbers={{ jlcpcb: ["C5261083"] }}
/>
)
const RgbLed = (props: any) => (
<chip
{...props}
footprint="kicad:LED_SMD/LED_RGB_5050-6"
supplierPartNumbers={{ jlcpcb: ["C2843868"] }}
pinLabels={{
pin1: "GREEN_K",
pin2: "RED_K",
pin3: "ANODE",
pin4: "BLUE_K",
}}
pinAttributes={{
ANODE: { requiresPower: true },
GREEN_K: { requiresGround: true },
RED_K: { requiresGround: true },
BLUE_K: { requiresGround: true },
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["BLUE_K", "ANODE"],
},
rightSide: {
direction: "top-to-bottom",
pins: ["GREEN_K", "RED_K"],
},
}}
/>
)
const PushButton2Pin = (props: any) => (
<chip
{...props}
footprint="kicad:Button_Switch_SMD/SW_SPST_B3U-1000P-B"
pinLabels={{
pin1: "A",
pin2: "B",
}}
pinAttributes={{
A: { mustBeConnected: true },
B: { requiresPower: true, requiresGround: true },
}}
/>
)
const TerminalBlock2 = (props: any) => (
<connector
{...props}
footprint="kicad:TerminalBlock/TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm"
supplierPartNumbers={{ jlcpcb: ["C8445"] }}
pinLabels={{
pin1: "VBUS",
pin2: "GND",
}}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: ["VBUS", "GND"],
},
}}
/>
)
const SwdHeader = (props: any) => (
<pinheader
{...props}
pinCount={5}
gender="female"
pitch="2.54mm"
showSilkscreenPinLabels={true}
pinLabels={["3V3", "SWDIO", "SWCLK", "NRST", "GND"]}
schPinArrangement={{
leftSide: {
direction: "top-to-bottom",
pins: [1, 2, 3, 4, 5],
},
}}
/>
)
export default () => (
<board layers={2}>
<group pcbX="-41mm" pcbY="0mm">
<UsbCPlug
name="USB2"
pcbX="-40mm"
pcbY="0mm"
pcbRotation={270}
schX="-19mm"
schY="-2mm"
/>
<resistor
name="R1"
resistance="100ohm"
footprint="0402"
pcbX="4mm"
pcbY="-5.5mm"
schX="-13mm"
schY="-3.5mm"
/>
<resistor
name="R2"
resistance="100ohm"
footprint="0402"
pcbX="4mm"
pcbY="5.5mm"
schX="-13mm"
schY="2.5mm"
/>
<EsdDiode
name="D1"
pcbX="4mm"
pcbY="-9mm"
pcbRotation={180}
schX="-10mm"
schY="-4mm"
/>
<EsdDiode
name="D2"
pcbX="4mm"
pcbY="9mm"
pcbRotation={180}
schX="-10mm"
schY="3mm"
/>
<Fusb302 name="U1" pcbX="28mm" pcbY="0mm" schX="-5mm" schY="0mm" />
<capacitor
name="C7"
capacitance="100nF"
footprint="0402"
pcbX="34mm"
pcbY="-4mm"
schX="-1mm"
schY="-5mm"
/>
<capacitor
name="C8"
capacitance="1uF"
footprint="0603"
pcbX="34mm"
pcbY="4mm"
schX="1mm"
schY="-5mm"
/>
<capacitor
name="C9"
capacitance="220pF"
footprint="0402"
pcbX="12mm"
pcbY="-10mm"
schX="-4mm"
schY="-6mm"
/>
<capacitor
name="C10"
capacitance="220pF"
footprint="0402"
pcbX="12mm"
pcbY="10mm"
schX="-4mm"
schY="6mm"
/>
</group>
<group pcbX="-12mm" pcbY="17mm">
<capacitor
name="C2"
capacitance="100nF"
footprint="0603"
pcbX="-9mm"
pcbY="-6mm"
schX="-13mm"
schY="10mm"
/>
<capacitor
name="C4"
capacitance="10uF"
footprint="1206"
pcbX="-9mm"
pcbY="6mm"
schX="-11mm"
schY="10mm"
/>
<Buck3V3 name="U3" pcbX="0mm" pcbY="0mm" schX="-6.5mm" schY="10.5mm" />
<capacitor
name="C11"
capacitance="100nF"
footprint="0402"
pcbX="1mm"
pcbY="-8mm"
schX="-4mm"
schY="14mm"
/>
<inductor
name="L1"
inductance="6.8uH"
footprint="kicad:Inductor_SMD/L_1210_3225Metric"
pcbX="12mm"
pcbY="0mm"
schX="-1mm"
schY="10.5mm"
/>
<capacitor
name="C5"
capacitance="22uF"
footprint="1206"
pcbX="21mm"
pcbY="-6mm"
schX="3mm"
schY="10mm"
/>
<capacitor
name="C3"
capacitance="22uF"
footprint="1206"
pcbX="21mm"
pcbY="6mm"
schX="5mm"
schY="10mm"
/>
</group>
<group pcbX="10mm" pcbY="-2mm">
<Stm32F030 name="U2" pcbX="0mm" pcbY="0mm" schX="7mm" schY="-1mm" />
<resistor
name="R3"
resistance="2.2kohm"
footprint="0402"
pcbX="-11mm"
pcbY="-7mm"
schX="1mm"
schY="-8mm"
/>
<resistor
name="R4"
resistance="2.2kohm"
footprint="0402"
pcbX="-11mm"
pcbY="-3.5mm"
schX="-1mm"
schY="-8mm"
/>
<resistor
name="R8"
resistance="4.7kohm"
footprint="0402"
pcbX="-11mm"
pcbY="1mm"
schX="1mm"
schY="-10mm"
/>
<capacitor
name="C1"
capacitance="100nF"
footprint="0402"
pcbX="11mm"
pcbY="5mm"
schX="12mm"
schY="5mm"
/>
<resistor
name="R9"
resistance="10kohm"
footprint="0402"
pcbX="18mm"
pcbY="-10mm"
schX="3mm"
schY="12mm"
/>
<PushButton2Pin
name="SW1"
pcbX="16mm"
pcbY="-14mm"
schX="4mm"
schY="10mm"
/>
<capacitor
name="C6"
capacitance="100nF"
footprint="0402"
pcbX="28mm"
pcbY="-14mm"
schX="6.5mm"
schY="10mm"
/>
</group>
<group pcbX="30mm" pcbY="12mm">
<RgbLed name="LED1" pcbX="-2mm" pcbY="0mm" schX="13mm" schY="10mm" />
<resistor
name="R7"
resistance="2.2kohm"
footprint="0402"
pcbX="-12mm"
pcbY="4mm"
schX="9.5mm"
schY="12mm"
/>
<resistor
name="R6"
resistance="5.6kohm"
footprint="0402"
pcbX="7mm"
pcbY="-6mm"
schX="18mm"
schY="10mm"
/>
<resistor
name="R5"
resistance="2.2kohm"
footprint="0402"
pcbX="7mm"
pcbY="6mm"
schX="18mm"
schY="12mm"
/>
</group>
<SwdHeader
name="J1"
pcbX="46mm"
pcbY="6mm"
pcbRotation={90}
schX="20mm"
schY="6mm"
/>
<TerminalBlock2
name="CN1"
pcbX="52mm"
pcbY="-14mm"
pcbRotation={90}
schX="20mm"
schY="-6mm"
/>
<trace from="USB2.pin2" to="net.VBUS" />
<trace from="USB2.pin7" to="net.VBUS" />
<trace from="USB2.pin10" to="net.VBUS" />
<trace from="USB2.pin15" to="net.VBUS" />
<trace from="USB2.pin1" to="net.GND" />
<trace from="USB2.pin8" to="net.GND" />
<trace from="USB2.pin9" to="net.GND" />
<trace from="USB2.pin16" to="net.GND" />
<trace from="USB2.pin17" to="net.GND" />
<trace from="USB2.pin18" to="net.GND" />
<trace from="USB2.pin19" to="net.GND" />
<trace from="USB2.pin20" to="net.GND" />
<trace from="USB2.pin11" to="R1.pin1" />
<trace from="USB2.pin3" to="R2.pin1" />
<trace from="R1.pin2" to="U1.CC2_A" />
<trace from="R1.pin2" to="U1.CC2_B" />
<trace from="R1.pin2" to="C9.pin1" />
<trace from="C9.pin2" to="net.GND" />
<trace from="R2.pin2" to="U1.CC1_A" />
<trace from="R2.pin2" to="U1.CC1_B" />
<trace from="R2.pin2" to="C10.pin1" />
<trace from="C10.pin2" to="net.GND" />
<trace from="R1.pin2" to="D1.pin1" />
<trace from="D1.pin2" to="net.GND" />
<trace from="R2.pin2" to="D2.pin1" />
<trace from="D2.pin2" to="net.GND" />
<trace from="U1.VBUS" to="net.VBUS" />
<trace from="U1.VDD_A" to="net.V3_3" />
<trace from="U1.VDD_B" to="net.V3_3" />
<trace from="C7.pin1" to="net.V3_3" />
<trace from="C7.pin2" to="net.GND" />
<trace from="C8.pin1" to="net.V3_3" />
<trace from="C8.pin2" to="net.GND" />
<trace from="U1.GND_A" to="net.GND" />
<trace from="U1.GND_B" to="net.GND" />
<trace from="U1.EP" to="net.GND" />
<trace from="U1.INT_N" to="net.INT" />
<trace from="U1.SCL" to="net.SCL" />
<trace from="U1.SDA" to="net.SDA" />
<trace from="C2.pin1" to="net.VBUS" />
<trace from="C2.pin2" to="net.GND" />
<trace from="C4.pin1" to="net.VBUS" />
<trace from="C4.pin2" to="net.GND" />
<trace from="U3.VIN" to="net.VBUS" />
<trace from="U3.EN" to="net.VBUS" />
<trace from="U3.GND" to="net.GND" />
<trace from="U3.SW" to="L1.pin1" />
<trace from="L1.pin2" to="net.V3_3" />
<trace from="U3.FB" to="net.V3_3" />
<trace from="U3.BST" to="C11.pin1" />
<trace from="C11.pin2" to="U3.SW" />
<trace from="C5.pin1" to="net.V3_3" />
<trace from="C5.pin2" to="net.GND" />
<trace from="C3.pin1" to="net.V3_3" />
<trace from="C3.pin2" to="net.GND" />
<trace from="U2.VDD" to="net.V3_3" />
<trace from="U2.VDDA" to="net.V3_3" />
<trace from="U2.VSS" to="net.GND" />
<trace from="U2.BOOT0" to="net.GND" />
<trace from="U2.NRST" to="C1.pin1" />
<trace from="C1.pin2" to="net.GND" />
<trace from="U2.PA9_SCL" to="net.SCL" />
<trace from="U2.PA10_SDA" to="net.SDA" />
<trace from="U2.PB1_INT" to="net.INT" />
<trace from="U2.PF1_OSC_OUT" to="net.BTN" />
<trace from="R3.pin1" to="net.V3_3" />
<trace from="R3.pin2" to="net.SDA" />
<trace from="R4.pin1" to="net.V3_3" />
<trace from="R4.pin2" to="net.SCL" />
<trace from="R8.pin1" to="net.V3_3" />
<trace from="R8.pin2" to="net.INT" />
<trace from="R9.pin1" to="net.V3_3" />
<trace from="R9.pin2" to="net.BTN" />
<trace from="SW1.A" to="net.BTN" />
<trace from="SW1.B" to="net.GND" />
<trace from="C6.pin1" to="net.BTN" />
<trace from="C6.pin2" to="net.GND" />
<trace from="LED1.ANODE" to="net.V3_3" />
<trace from="U2.PA7_LED_B" to="R7.pin1" />
<trace from="R7.pin2" to="LED1.BLUE_K" />
<trace from="U2.PA6_LED_G" to="R6.pin1" />
<trace from="R6.pin2" to="LED1.GREEN_K" />
<trace from="U2.PA5_LED_R" to="R5.pin1" />
<trace from="R5.pin2" to="LED1.RED_K" />
<trace from="J1.pin1" to="net.V3_3" />
<trace from="J1.pin2" to="U2.PA13_SWDIO" />
<trace from="J1.pin3" to="U2.PA14_SWCLK" />
<trace from="J1.pin4" to="U2.NRST" />
<trace from="J1.pin5" to="net.GND" />
<trace from="CN1.VBUS" to="net.VBUS" />
<trace from="CN1.GND" to="net.GND" />
</board>
)
