arnavk-09/noSchematicRepresentation

This code defines a 100mm by 30mm electronic circuit board featuring an 8-pin DIP chip, a 4-pin connector, a pushbutton switch, and an 8-pin GPIO pinout with designated functions.

Version: 0.0.1
License: unset
Stars: 0

index.tsx

PCB

Schematic

export default () => (
  <board width="100mm" height="30mm">
    {/* 1. chip \E2\80\94 defines ChipProps / ChipPropsSU */}
    <chip
      name="U1"
      footprint="dip8"
      pcbX={-35}
      pcbY={0}
      pinLabels={{
        pin1: "VCC",
        pin2: "INPUT",
        pin3: "OUTPUT",
        pin4: "GND",
        pin5: "NC1",
        pin6: "NC2",
        pin7: "NC3",
        pin8: "NC4",
      }}
      noSchematicRepresentation
    />

    {/* 2. connector \E2\80\94 ConnectorProps extends ChipPropsSU */}
    <connector
      name="J1"
      footprint="pinrow4_p2.54"
      pcbX={-12}
      pcbY={0}
      pinLabels={{
        pin1: "VCC",
        pin2: "DATA_P",
        pin3: "DATA_N",
        pin4: "GND",
      }}
      noSchematicRepresentation
    />

    {/* 3. pushbutton \E2\80\94 PushButtonProps = ChipProps */}
    <pushbutton
      name="SW1"
      footprint="pushbutton"
      pcbX={12}
      pcbY={0}
      noSchematicRepresentation
    />

    {/* 4. pinout \E2\80\94 PinoutProps extends ChipProps */}
    <pinout
      name="MOD1"
      footprint="dip8"
      pcbX={35}
      pcbY={0}
      pinLabels={{
        pin1: "GND",
        pin2: "GPIO1",
        pin3: "GPIO2",
        pin4: "GPIO3",
        pin5: "GPIO4",
        pin6: "SDA",
        pin7: "SCL",
        pin8: "VCC",
      }}
      noSchematicRepresentation
    />
  </board>
)