abse/smart-ring-flex

validation/full-eight-build-final.log

Building 8 file(s)...
Building baseline/v20-cloud-index.circuit.json...
Generating circuit JSON...
Circuit JSON written to dist/baseline/v20-cloud-index/circuit.json
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "L" prefix is being used with a <chip />, try using it with an <inductor />
Q10 has no pin with requires_power=true
Q10 has no pin with requires_ground=true
All pins on Q10 are underspecified (no pinAttributes set)
J401 has no pin with requires_power=true
J401 has no pin with requires_ground=true
All pins on J401 are underspecified (no pinAttributes set)
J101 has no pin with requires_power=true
J101 has no pin with requires_ground=true
J103 has no pin with requires_power=true
J103 has no pin with requires_ground=true
All pins on J103 are underspecified (no pinAttributes set)
J301 has no pin with requires_power=true
J301 has no pin with requires_ground=true
All pins on J301 are underspecified (no pinAttributes set)
All pins on PG301 are underspecified (no pinAttributes set)
All pins on PG302 are underspecified (no pinAttributes set)
U9 has no pin with requires_power=true
U9 has no pin with requires_ground=true
LED1 has no pin with requires_power=true
LED1 has no pin with requires_ground=true
All pins on LED1 are underspecified (no pinAttributes set)
PD1 has no pin with requires_power=true
PD1 has no pin with requires_ground=true
All pins on PD1 are underspecified (no pinAttributes set)
PD2 has no pin with requires_power=true
PD2 has no pin with requires_ground=true
All pins on PD2 are underspecified (no pinAttributes set)
U_TH1 has no pin with requires_power=true
U_TH1 has no pin with requires_ground=true
All pins on U_TH1 are underspecified (no pinAttributes set)
U_TH2 has no pin with requires_power=true
U_TH2 has no pin with requires_ground=true
All pins on U_TH2 are underspecified (no pinAttributes set)
J401 is facing x+ but should face y- so the connector is accessible from the board edge
J103 is inferred to face y+ from its cable insertion center because no explicit footprint insertionDirection is defined, but should face y- so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
J301 is inferred to face x- from its cable insertion center because no explicit footprint insertionDirection is defined, but should face y- so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
U_NEG is inferred to face x- from its cable insertion center because no explicit footprint insertionDirection is defined, but should face y- so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
JPOS is inferred to face x- from its cable insertion center because no explicit footprint insertionDirection is defined, but should face y- so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
Building contact-island.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/contact-island/circuit.json
Building cutoff-ring.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/cutoff-ring/circuit.json
Building docked.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/docked/circuit.json
Building folded.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/folded/circuit.json
Building index.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/index/circuit.json
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
The "Q" prefix is being used with a <chip />, try using it with a <transistor />
The "L" prefix is being used with a <chip />, try using it with an <inductor />
The "J" prefix is being used with a <chip />, try using it with a <connector /> or <jumper />
Q10 has no pin with requires_power=true
Q10 has no pin with requires_ground=true
All pins on Q10 are underspecified (no pinAttributes set)
All pins on PAD_CHARGE_POS are underspecified (no pinAttributes set)
All pins on PAD_CHARGE_GND are underspecified (no pinAttributes set)
J101 has no pin with requires_power=true
J101 has no pin with requires_ground=true
J105 has no pin with requires_power=true
J105 has no pin with requires_ground=true
All pins on J105 are underspecified (no pinAttributes set)
Q106 has no pin with requires_power=true
Q106 has no pin with requires_ground=true
All pins on Q106 are underspecified (no pinAttributes set)
DOCK_FLEX_ROOT has no pin with requires_power=true
DOCK_FLEX_ROOT has no pin with requires_ground=true
All pins on DOCK_FLEX_ROOT are underspecified (no pinAttributes set)
All pins on PG301 are underspecified (no pinAttributes set)
All pins on PG302 are underspecified (no pinAttributes set)
U9 has no pin with requires_power=true
U9 has no pin with requires_ground=true
U8 has no pin with requires_power=true
LED1 has no pin with requires_power=true
LED1 has no pin with requires_ground=true
All pins on LED1 are underspecified (no pinAttributes set)
PD1 has no pin with requires_power=true
PD1 has no pin with requires_ground=true
All pins on PD1 are underspecified (no pinAttributes set)
PD2 has no pin with requires_power=true
PD2 has no pin with requires_ground=true
All pins on PD2 are underspecified (no pinAttributes set)
U_TH1 has no pin with requires_power=true
U_TH1 has no pin with requires_ground=true
All pins on U_TH1 are underspecified (no pinAttributes set)
U_TH2 has no pin with requires_power=true
U_TH2 has no pin with requires_ground=true
All pins on U_TH2 are underspecified (no pinAttributes set)
JSWD1 has no pin with requires_power=true
JSWD1 has no pin with requires_ground=true
All pins on JSWD1 are underspecified (no pinAttributes set)
PAD_CHARGE_POS has no courtyard
PAD_CHARGE_GND has no courtyard
DOCK_FLEX_ROOT has no courtyard
U_NEG is inferred to face x- from its cable insertion center because no explicit footprint insertionDirection is defined, but should face y- so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
JPOS is inferred to face x- from its cable insertion center because no explicit footprint insertionDirection is defined, but should face x+ so the connector is accessible from the board edge. Set insertionDirection on the <footprint> to specify the actual direction in the footprint's unrotated orientation; for example, <footprint insertionDirection="from_above"> for a connector accessed from above the PCB (+Z).
Trace [.J101 > .EH2 to .J101 > .EH1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.CHV16 > .bottom to .CHV17 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U101 > .OUT to .DOCK_FLEX_ROOT > .pin2] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.CHV10 > .bottom to .CHV11 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.PAD_CHARGE_GND > .GND to .R133 > .pin2] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.RCV_132 > .bottom to .RCV_133 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.PAD_CHARGE_POS > .POS to .R134 > .pin2] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.R23 > .pin1 to .R25 > .pin1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.RCV_5 > .bottom to .RCV_10 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U1 > .P0_14 to .U3 > .SDA] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_53 > .bottom to .VSES_54 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.R131 > .pin2 to .U1 > .SWDIO] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.SDIO > .bottom to .VSES_95 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.R130 > .pin2 to .U1 > .SWDCLK] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.SWCLK_TEST_ESCAPE_L > .bottom to .ELASTIC_SWDCLK_1002001 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_73 > .bottom to .FINAL_RESET_1 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.Q10 > .pin2 to .R25 > .pin2] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.NEAR_KEEP_JSWD1_0 > .bottom to .FINAL_CHARGE_DISABLE_1 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.NEAR_VBAT_SENSE_0 > .bottom to .NEAR_VBAT_SENSE_1 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.RXA > .bottom to .RXB > .bottom] is routed thinner than requested (requested: 0.2mm, actual: 0.1mm).
Trace [.U6 > .pin4 to .U9 > .pin1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_14 > .bottom to .VSES_15 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U1 > .pin46 to .VSES_24 > .top] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_24 > .bottom to .VSES_25 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U6 > .pin5 to .R6 > .pin2] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_71 > .bottom to .VSES_72 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U1 > .pin30 to .L1 > .pin1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_75 > .bottom to .VSES_76 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U2 > .pin2 to .JPOS > .pin1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_96 > .bottom to .VSES_97 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U1 > .pin34 to .Y1 > .pin1] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.VSES_126 > .bottom to .VSES_127 > .bottom] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
Trace [.U1 > .pin35 to .Y1 > .pin3] is routed thinner than requested (requested: 0.1mm, actual: 0.08mm).
.PAD_CHARGE_GND > .GND to .R133 > .pin2 has a 8.84 mm segment on top at 305.00°, 10.00° from the nearest allowed direction (315°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°).
.PAD_CHARGE_POS > .POS to .R134 > .pin2 has a 8.84 mm segment on top at 305.00°, 10.00° from the nearest allowed direction (315°). Prefer a multiple of 45° for segments longer than 5 mm (tolerance 4°).
Building wired-dock-review.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/wired-dock-review/circuit.json
Building wired-service-folded.circuit.tsx...
Generating circuit JSON...
Circuit JSON written to dist/wired-service-folded/circuit.json
Generating preview images...
[index] Generating PCB SVG...
[index] Written pcb.svg
[index] Generating schematic SVG...
[index] Written schematic.svg
Generating 3D preview images for all site builds...

Build complete
  Circuits  8 passed
  Options   site, pcb-svgs, schematic-svgs
  Output    dist

✓ Done
Build exiting with code 0: build finished successfully
Eight strict Circuit JSON builds; index contains the real flat PCB and separately selectable current folded assembly parts.