abse/museair-usb
USB-C–powered ESP32-C3 controller board with AP63203 buck conversion, AP2112K 3.3V regulation, I²C SEN62 sensor interface, status LED, buttons, UART/I²C headers, and extensive decoupling.
- Version
- 0.5.7
- License
- unset
- Stars
- 0
Files in (root)/fabrication-review/tscircuit.pretty
- 0603WAF1000T5E.kicad_mod
- 0603WAF1001T5E.kicad_mod
- 0603WAF1002T5E.kicad_mod
- 0603WAF1003T5E.kicad_mod
- 0603WAF1004T5E.kicad_mod
- 0603WAF5101T5E.kicad_mod
- 532610271.kicad_mod
- AFC24-S10FIA-00.kicad_mod
- AP2112K-3.3TRG1.kicad_mod
- AP63203WU-7.kicad_mod
- CC0603KRX7R9BB104_C11.kicad_mod
- CC0603KRX7R9BB104_C19.kicad_mod
- CC0603KRX7R9BB104.kicad_mod
- CL10A105KB8NNNC.kicad_mod
- CL21A106KAYNNNE.kicad_mod
- CL21A226MAQNNNE.kicad_mod
- CL21B105KBFNNNE.kicad_mod
- connector.kicad_mod
- ESP32-C3-WROOM-02-N4.kicad_mod
- GRM1885C1H103JA01D.kicad_mod
- GRM31C5C1H104JA01L.kicad_mod
- hole_circle_holeDiameter0.6096mm.kicad_mod
- I2C_4-pin_solder_contacts,_2.54mm_pitch.kicad_mod
- KT-0805G.kicad_mod
- MAX98357AETE+T.kicad_mod
- MCP6001T-I_OT.kicad_mod
- SEN62-SIN-T.kicad_mod
- SM03B-SRSS-TB(LF)(SN).kicad_mod
- SM06B-GHS-TB(LF)(SN).kicad_mod
- SWPA4030S4R7MT.kicad_mod
- TCA9534APWR.kicad_mod
- TS-1088-AR02016.kicad_mod
- TS-1102S-B-H-B.kicad_mod
- TYPE-C-31-M-12.kicad_mod
- UART_6-pin_pogo_solder_contacts,_2mm_pitch.kicad_mod
- ZTS6216.kicad_mod
Related Packages
More from this authorabse/dual-usb-peltier-assemblyA USB‑C PD Peltier controller PCB combining RP2040 control, adjustable buck‑boost TEC power, temperature sensing, fan regulation, USB programming, protection, status LEDs, and external accessory hardware.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something new0hmX/mt41k512m8da-107-it-p-fanoutThis code defines the physical footprint, routing, and layout configuration for a DDR3 memory module using surface-mount pads, vias, and copper traces on a printed circuit board (PCB).