abse/museair-usb

validation/compact-sensor-insertion.json

{
  "status": "pass",
  "paths": [
    {
      "part": "carrier",
      "samples": 148,
      "staging_y_offset_mm": 7.8,
      "collisions": []
    },
    {
      "part": "sensor",
      "samples": 148,
      "staging_y_offset_mm": 12,
      "collisions": []
    }
  ],
  "sequence": [
    "Remove lid and PCB; disconnect and park sensor/display cables",
    "Drop base at Y+7.8mm, slide forward 7.8mm, lower onto floor seats",
    "Drop bare sensor at Y+12mm, slide forward 12mm, lower onto base",
    "Let side arms click into sensor recesses; install two M2x4 holder screws and washers; ties are optional backup",
    "Reconnect harness and display flex; install PCB and lid"
  ],
  "nominal_central_base_clearance_mm": 0.4,
  "nominal_sensor_under_ledge_clearance_during_slide_mm": 0.4,
  "sampling_step_vertical_mm": 0.5,
  "snap_arms_must_flex_outward_during_slide": true,
  "snap_flex_force_and_retention_not_simulated": true,
  "sensor_path_checks_rigid_frame_only": true,
  "physical_fit_and_strength_verified": false
}