abse/gameboy-advance
This code defines a collection of hardware components, including microcontrollers, sensors, display modules, power management ICs, and passive/passive components, each modeled as 3D symbols with specific footprints, pin configurations, and associated models for PCB and schematic design.
- Version
- 0.0.10
- License
- unset
- Stars
- 0
subcircuits/PowerBoost_MT3608/PowerBoost_MT3608.circuit.tsx
PCB
Schematic
import type { GroupProps } from "@tscircuit/props"
import { AO3401A } from "./imports/AO3401A"
import { A_0603WAF1003T5E } from "./imports/A_0603WAF1003T5E"
import { A_0603WAF9532T5E } from "./imports/A_0603WAF9532T5E"
import { CL10A106KP8NNNC } from "./imports/CL10A106KP8NNNC"
import { CL10A226MQ8NRNC } from "./imports/CL10A226MQ8NRNC"
import { FRC0603F1302TS } from "./imports/FRC0603F1302TS"
import { MMBT3904_RANGE_100_300_ } from "./imports/MMBT3904_RANGE_100_300_"
import { MT3608 } from "./imports/MT3608"
import { S2B_PH_K_S_LF__SN_ } from "./imports/S2B_PH_K_S_LF__SN_"
import { SMMS0630_220M } from "./imports/SMMS0630_220M"
import { SS34 } from "./imports/SS34"
const batteryTraceProps = { thickness: "0.3mm" } as const
const powerTraceProps = { thickness: "0.4mm" } as const
const gndLabel = { displayName: "GND", schDisplayLabel: "GND" } as const
const vbusLabel = { displayName: "VBUS", schDisplayLabel: "VBUS" } as const
const vsysLabel = { displayName: "VSYS", schDisplayLabel: "VSYS" } as const
const schSections = {
batteryInput: "battery-input",
boostConverter: "boost-converter",
usbShutdown: "usb-shutdown",
} as const
export type PowerBoostMT3608Props = Omit<GroupProps, "children"> & {
inductorPcbY?: number
}
/**
* Battery-powered 5 V boost supply extracted from abse/gameboy.
*
* VBUS disables the MT3608 while USB power is present. VSYS is the boosted
* output and GND is the common return. Connect an external switch between
* BAT_POS and BAT_SWITCHED, or connect both ports to the same net for
* always-on operation.
*/
export const PowerBoost_MT3608 = ({
name = "PowerBoost_MT3608",
inductorPcbY = 21.25,
...props
}: PowerBoostMT3608Props) => (
<group
subcircuit={false}
{...props}
name={name}
>
<net name="POWER_GND" isGroundNet />
<net name="POWER_VBUS" isPowerNet />
<net name="POWER_VSYS" isPowerNet />
<net name="POWER_BAT_POS" isPowerNet />
<net name="POWER_BAT_SWITCHED" isPowerNet />
<schematicsection
name={schSections.batteryInput}
displayName="Battery Input and Cutoff"
/>
<schematicsection
name={schSections.boostConverter}
displayName="MT3608 Boost Converter"
/>
<schematicsection
name={schSections.usbShutdown}
displayName="USB Boost Shutdown"
/>
<S2B_PH_K_S_LF__SN_
name="J_BAT"
schSectionName={schSections.batteryInput}
pcbX={47}
pcbY={25.25}
pcbRotation={90}
schX={-10}
schY={4}
/>
<AO3401A
name="Q_BAT_CUTOFF"
schSectionName={schSections.batteryInput}
pcbX={-11.5}
pcbY={21.25}
schX={-6}
schY={4}
/>
<A_0603WAF1003T5E
name="R_BAT_GATE_PULLUP"
schSectionName={schSections.batteryInput}
pcbX={-11.5}
pcbY={26.25}
pcbRotation={90}
schX={-10}
schY={0.5}
/>
<A_0603WAF1003T5E
name="R_BAT_GATE_BASE"
schSectionName={schSections.batteryInput}
pcbX={-14.5}
pcbY={26.25}
pcbRotation={90}
schX={-10.78}
schY={-3}
/>
<MMBT3904_RANGE_100_300_
name="Q_BAT_GATE"
schSectionName={schSections.batteryInput}
pcbX={-17.5}
pcbY={26.25}
schX={-5.84}
schY={-3}
/>
<SMMS0630_220M
name="L_BAT_BOOST"
schSectionName={schSections.boostConverter}
pcbX={-2.5}
pcbY={inductorPcbY}
schX={-2}
schY={4}
/>
<MT3608
name="U_BAT_BOOST"
schSectionName={schSections.boostConverter}
pcbX={6.5}
pcbY={21.25}
schX={2}
schY={4}
/>
<SS34
name="D_BAT_BOOST"
schSectionName={schSections.boostConverter}
pcbX={15.5}
pcbY={21.25}
pcbRotation={180}
schX={6}
schY={4}
/>
<CL10A106KP8NNNC
name="C_BAT_IN"
schSectionName={schSections.boostConverter}
pcbX={3.5}
pcbY={26.25}
pcbRotation={90}
schX={-2}
schY={0.5}
/>
<CL10A106KP8NNNC
name="C_BAT_IN_BULK"
schSectionName={schSections.boostConverter}
pcbX={-2.5}
pcbY={26.75}
pcbRotation={90}
schX={-1.38}
schY={-3}
/>
<CL10A226MQ8NRNC
name="C_BAT_OUT"
schSectionName={schSections.boostConverter}
pcbX={20.5}
pcbY={21.25}
pcbRotation={90}
schX={10}
schY={0.5}
/>
<CL10A226MQ8NRNC
name="C_BAT_OUT_BULK"
schSectionName={schSections.boostConverter}
pcbX={23.5}
pcbY={21.25}
pcbRotation={90}
schX={10}
schY={-3}
/>
<A_0603WAF9532T5E
name="R_BOOST_TOP"
schSectionName={schSections.boostConverter}
pcbX={11.5}
pcbY={26.25}
pcbRotation={90}
schX={6}
schY={0.5}
/>
<FRC0603F1302TS
name="R_BOOST_BOT"
schSectionName={schSections.boostConverter}
pcbX={8.5}
pcbY={26.25}
pcbRotation={90}
schX={6}
schY={-3}
/>
<A_0603WAF1003T5E
name="R_BOOST_EN_PULLUP"
schSectionName={schSections.boostConverter}
pcbX={16.5}
pcbY={26.25}
pcbRotation={90}
schX={2}
schY={0.5}
/>
<A_0603WAF1003T5E
name="R_USB_BOOST_OFF"
schSectionName={schSections.usbShutdown}
pcbX={24.5}
pcbY={26.25}
pcbRotation={90}
schX={-0.86}
schY={-7}
/>
<MMBT3904_RANGE_100_300_
name="Q_USB_BOOST_OFF"
schSectionName={schSections.usbShutdown}
pcbX={28.5}
pcbY={18.25}
schX={4.08}
schY={-7}
/>
<A_0603WAF1003T5E
name="R_USB_BOOST_OFF_PULLDOWN"
schSectionName={schSections.usbShutdown}
pcbX={31.5}
pcbY={18.25}
pcbRotation={90}
schX={8.78}
schY={-7}
/>
<trace from=".J_BAT > .pin1" to="net.POWER_BAT_POS" {...batteryTraceProps} />
<trace
from="net.POWER_BAT_SWITCHED"
to=".Q_BAT_CUTOFF > .source"
{...powerTraceProps}
/>
<trace from="net.POWER_BAT_SWITCHED" to=".R_BOOST_EN_PULLUP > .pin1" />
<trace
from=".R_BOOST_EN_PULLUP > .pin2"
to=".U_BAT_BOOST > .EN"
schDisplayLabel="BOOST_EN"
/>
<trace from=".Q_USB_BOOST_OFF > .pin1" to=".U_BAT_BOOST > .EN" />
<trace from=".Q_USB_BOOST_OFF > .pin3" to="net.POWER_GND" {...gndLabel} />
<trace from="net.POWER_VBUS" to=".R_USB_BOOST_OFF > .pin1" {...vbusLabel} />
<trace
from=".R_USB_BOOST_OFF > .pin2"
to=".Q_USB_BOOST_OFF > .pin2"
schDisplayLabel="USB_DETECT"
/>
<trace
from=".Q_USB_BOOST_OFF > .pin2"
to=".R_USB_BOOST_OFF_PULLDOWN > .pin1"
/>
<trace
from=".R_USB_BOOST_OFF_PULLDOWN > .pin2"
to="net.POWER_GND"
{...gndLabel}
/>
<trace
from=".Q_BAT_CUTOFF > .drain"
to=".U_BAT_BOOST > .IN"
{...powerTraceProps}
schDisplayLabel="BOOST_IN"
/>
<trace from="net.POWER_BAT_SWITCHED" to=".R_BAT_GATE_PULLUP > .pin1" />
<trace
from=".R_BAT_GATE_PULLUP > .pin2"
to=".Q_BAT_CUTOFF > .gate"
schDisplayLabel="BAT_GATE"
/>
<trace from=".Q_BAT_GATE > .pin1" to=".Q_BAT_CUTOFF > .gate" />
<trace from=".Q_BAT_GATE > .pin3" to="net.POWER_GND" {...gndLabel} />
<trace from=".U_BAT_BOOST > .EN" to=".R_BAT_GATE_BASE > .pin1" />
<trace
from=".R_BAT_GATE_BASE > .pin2"
to=".Q_BAT_GATE > .pin2"
schDisplayLabel="GATE_DRIVE"
/>
<trace
from=".Q_BAT_CUTOFF > .drain"
to=".L_BAT_BOOST > .pin1"
{...powerTraceProps}
/>
<trace
from=".L_BAT_BOOST > .pin2"
to=".U_BAT_BOOST > .SW"
{...powerTraceProps}
schDisplayLabel="SW"
/>
<trace
from=".U_BAT_BOOST > .SW"
to=".D_BAT_BOOST > .anode"
{...powerTraceProps}
/>
<trace
from=".D_BAT_BOOST > .cathode"
to="net.POWER_VSYS"
{...powerTraceProps}
{...vsysLabel}
/>
<trace
from=".U_BAT_BOOST > .GND"
to="net.POWER_GND"
{...powerTraceProps}
{...gndLabel}
/>
<trace
from=".C_BAT_IN > .pin1"
to=".Q_BAT_CUTOFF > .drain"
{...powerTraceProps}
/>
<trace
from=".C_BAT_IN > .pin2"
to="net.POWER_GND"
{...powerTraceProps}
{...gndLabel}
/>
<trace
from=".C_BAT_IN_BULK > .pin1"
to=".Q_BAT_CUTOFF > .drain"
{...powerTraceProps}
/>
<trace
from=".C_BAT_IN_BULK > .pin2"
to="net.POWER_GND"
{...powerTraceProps}
{...gndLabel}
/>
<trace
from=".C_BAT_OUT > .pin1"
to=".D_BAT_BOOST > .cathode"
{...powerTraceProps}
/>
<trace
from=".C_BAT_OUT > .pin2"
to="net.POWER_GND"
{...powerTraceProps}
{...gndLabel}
/>
<trace
from=".C_BAT_OUT_BULK > .pin1"
to=".D_BAT_BOOST > .cathode"
{...powerTraceProps}
/>
<trace
from=".C_BAT_OUT_BULK > .pin2"
to="net.POWER_GND"
{...powerTraceProps}
{...gndLabel}
/>
<trace from=".D_BAT_BOOST > .cathode" to=".R_BOOST_TOP > .pin1" />
<trace
from=".R_BOOST_TOP > .pin2"
to=".U_BAT_BOOST > .FB"
schDisplayLabel="FB"
/>
<trace from=".U_BAT_BOOST > .FB" to=".R_BOOST_BOT > .pin1" />
<trace from=".R_BOOST_BOT > .pin2" to="net.POWER_GND" {...gndLabel} />
<trace from=".J_BAT > .pin2" to="net.POWER_GND" {...gndLabel} />
</group>
)
export default PowerBoost_MT3608
Related Packages
More from this authorabse/gameboyThis code defines the hardware mapping and schematic connections for a Raspberry Pi Pico-based development board featuring RP2040 microcontroller, USB-C connector, various power regulation components, decoupling capacitors, resistors, LEDs, headers, and supporting passive components for signal integrity and debugging.
Similar packageaura/diy-power-delivery-triggerThis hardware design implements a USB Type-C port with supporting power management and signal conditioning components, including a USB-C connector, a FUSB302 USB-C port controller, ESD protection diodes, a buck converter for 3.3V power regulation, an STM32 microcontroller for control and processing, an RGB LED indicator, push button, terminal block connections, and associated filtering and support components.
Discover something newtechmannih/trellis-coreThis code defines a detailed electronic hardware schematic and PCB layout for a Linux System-on-Module, incorporating components such as oscillators, power regulators, USB-C connectors, connectors, LEDs, resistors, capacitors, inductors, and integrated circuits, with precise physical footprint and 3D models.