ShiboSoftwareDev/muse-reterminal-e1001-replacement
A four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.
- Version
- 0.0.1
- License
- unset
- Stars
- 0
README.md
# Muse e-paper carrier
Original four-layer tscircuit carrier for the 7.5 inch e-paper control interface role.
- Board: 100 × 70 mm
- MCU: ESP32-S3-WROOM-1-N16R8
- Via rule: 0.30 mm drill / 0.45 mm land
- JLCPCB/LCSC part numbers are attached to every assembled component.
This is a role-equivalent original design, not a mechanical clone of a commercial board.
Related Packages
More from this authorShiboSoftwareDev/f1c100s-linux-stepper-controllerA four-layer Linux motor-control carrier built around an Allwinner F1C100S SoC, USB‑C, SPI flash, multi-rail power regulation, DRV8825 stepper-driver stage with protection/current sensing, temperature monitoring, and external I/O connectors.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newkrishnax12/ip2312-fast-charging-moduleThis design implements a compact PCB with a USB-C input port, IP2312 battery charger IC, associated passive components (capacitors, resistors, inductor), output terminals for BAT and GND, and status indicator LEDs, facilitating fast lithium battery charging.