ShiboSoftwareDev/muse-ideaspark-1p9-replacement
A four-layer ESP32-S3 carrier board with USB‑C 5 V input, AMS1117 3.3 V regulation, reset/boot/user buttons, status LED, bulk decoupling, and a 24-pin FFC interface for display, audio, touch, or sensor peripherals.
- Version
- 0.0.1
- License
- unset
- Stars
- 0
README.md
# Muse 1.9 inch display carrier
Original four-layer tscircuit carrier for the SPI display and image endpoint role.
- Board: 70 × 55 mm
- MCU: ESP32-S3-WROOM-1-N16R8
- Via rule: 0.30 mm drill / 0.45 mm land
- JLCPCB/LCSC part numbers are attached to every assembled component.
This is a role-equivalent original design, not a mechanical clone of a commercial board.
Related Packages
More from this authorShiboSoftwareDev/simulationThis circuit models an NPN transistor switch with a 5V supply, a base resistor, a collector resistor, a switch controlling the base, and a voltage probe, simulated over 4ms using ngspice.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.