ShiboSoftwareDev/muse-home-assistant-voice-replacement
A 4-layer ESP32-S3 voice-interface carrier with USB‑C 5V input, AMS1117 3.3V regulation, reset/boot/PTT buttons, status LED, decoupling passives, and a 24-pin FFC interface.
- Version
- 0.0.1
- License
- unset
- Stars
- 0
index.circuit.tsx
PCB
Schematic
import { MuseGadgetBoard } from "./src/MuseGadgetBoard"
import { variantBySlug } from "./src/variants"
export default () => <MuseGadgetBoard variant={variantBySlug["home-assistant-voice-replacement"]} />
Related Packages
More from this authorShiboSoftwareDev/mspm0g3507-usb-c-dev-boardThe circuit assembles a USB-C port with integrated ESD protection, power regulation, UART interface, and microcontroller (MSPM0G3507) with supporting components for USB data lines, CC termination, I2C, SPI, reset circuitry, and indicator LEDs.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newabse/museair-usbUSB-C–powered ESP32-C3 controller board with AP63203 buck conversion, AP2112K 3.3V regulation, I²C SEN62 sensor interface, status LED, buttons, UART/I²C headers, and extensive decoupling.