ShiboSoftwareDev/i-wan

This code defines a PCB and schematic for a microcontroller development board, incorporating various surface-mount components (resistors, capacitors, headers, connectors, crystals, and an IC), with detailed footprints, electrical nets, and routing instructions.

Version: 1.0.10
License: unset
Stars: 0

fabrication/kicad-gerbers/drill-report.txt

Drill report for circuit-fixed.kicad_pcb
Created on 2026-08-11T01:44:05

Copper Layer Stackup:
    =============================================================
    L1 :  F.Cu                      front
    L2 :  In1.Cu                    in1
    L3 :  In2.Cu                    in2
    L4 :  B.Cu                      back


Drill file 'circuit-fixed-PTH.drl' contains
    plated through holes:
    =============================================================
    T1  0.300mm  0.0118"  (137 holes))
    T2  0.400mm  0.0157"  (79 holes))
    T3  0.700mm  0.0276"  (4 holes)  (with 2 slots)
    T4  0.800mm  0.0315"  (2 holes))
    T5  0.900mm  0.0354"  (14 holes))
    T6  1.000mm  0.0394"  (33 holes))

    Total plated holes count 269


Drill file 'circuit-fixed-NPTH.drl' contains
    unplated through holes:
    =============================================================
    T1  3.200mm  0.1260"  (4 holes))

    Total unplated holes count 4