MustafaMulla29/breakoutpoints

This design features a 20mm by 16mm custom PCB with a 16-pin QFP microcontroller (U1), a 100nF capacitor (C1), a 4-pin pin header (J1) for power and I²C connections, and a 10kΩ resistor (R1) connecting the microcontroller reset to VCC.

Version: 0.0.1
License: unset
Stars: 0

dist/index.cjs

'use strict';

var jsxRuntime = require('react/jsx-runtime');

var index = () => (jsxRuntime.jsxs("board", { width: "18mm", height: "12mm", children: [jsxRuntime.jsxs("breakout", { name: "REG_BREAKOUT", padding: "0.7mm", children: [jsxRuntime.jsx("chip", { name: "U1", footprint: "sot23", pinLabels: {
                        pin1: "VIN",
                        pin2: "GND",
                        pin3: "VOUT",
                    }, pcbX: 0, pcbY: 0 }), jsxRuntime.jsx("capacitor", { name: "CIN", capacitance: "1uF", footprint: "0402", pcbX: -3.2, pcbY: 1.7, connections: { pin1: "U1.VIN", pin2: "U1.GND" } }), jsxRuntime.jsx("capacitor", { name: "COUT", capacitance: "1uF", footprint: "0402", pcbX: 3.2, pcbY: 1.7, connections: { pin1: "U1.VOUT", pin2: "U1.GND" } })] }), jsxRuntime.jsx("pinheader", { name: "JIN", pinCount: 2, footprint: "pinrow2", pinLabels: ["VIN", "GND"], pcbX: -6, pcbY: -1 }), jsxRuntime.jsx("pinheader", { name: "JOUT", pinCount: 2, footprint: "pinrow2", pinLabels: ["VOUT", "GND"], pcbX: 6, pcbY: -1 }), jsxRuntime.jsx("resistor", { name: "RLED", resistance: "1k", footprint: "0402", pcbX: 4.4, pcbY: 4, connections: { pin1: "U1.VOUT", pin2: "net.PWR_LED" } }), jsxRuntime.jsx("trace", { from: "JIN.VIN", to: "U1.VIN" }), jsxRuntime.jsx("trace", { from: "JIN.GND", to: "U1.GND" }), jsxRuntime.jsx("trace", { from: "JOUT.VOUT", to: "U1.VOUT" }), jsxRuntime.jsx("trace", { from: "JOUT.GND", to: "U1.GND" })] }));

module.exports = index;